Guest Patricia Posted August 6, 2007 Posted August 6, 2007 I am using XP pro. Yesterday it gave me a spooler problem when trying to print. I restarted the computer and it has now wiped out all the printers there. I cannot get into the services to see whether the spooler function needs to be restarted as it gives an error message snap-in failed to initialise. I wanted to restore and this function is just not there. In properties it has been turned on, but if I go to Accessories it doesn't show. I have been on the Help and Support, but the system restore wizard will not start. I would be grateful of any help.thanks -- Patricia
Guest Elmo Posted August 6, 2007 Posted August 6, 2007 Re: snap-in failed to initialize Patricia wrote: > I am using XP pro. Yesterday it gave me a spooler problem when trying to > print. I restarted the computer and it has now wiped out all the printers > there. > > I cannot get into the services to see whether the spooler function needs to > be restarted as it gives an error message "snap-in failed to initialize". > > I wanted to restore and this function is just not there. In properties it > has been turned on, but if I go to Accessories it doesn't show. > > I have been on the Help and Support, but the system restore wizard will not > start. > > I would be grateful of any help. thanks A Google Groups search showed many threads on the subject. http://groups.google.com/groups/search?q=%22snap-in+failed+to+initialize%22&qt_s=Search Wesley Vogel has a couple of tips here: http://groups.google.com/group/microsoft.public.windowsxp.newusers/browse_thread/thread/ee3aaeceb6e8b684/019ba566faa78ec7?lnk=st&q=%22snap-in+failed+to+initialize%22&rnum=3#019ba566faa78ec7 -- Joe =o)
Guest Ramesh, MS-MVP Posted August 7, 2007 Posted August 7, 2007 Re: snap-in failed to initialize Hi Patricia, You can start the Spooler service using the NET.. Command. Click Start, Run and type: cmd /k net start spooler Press {ENTER} >> gives an error message snap-in failed to initialise. Posting the exact error message and the GUID code would help. -- Regards, Ramesh Srinivasan, Microsoft MVP [Windows Shell/User] Windows® Troubleshooting http://www.winhelponline.com "Patricia" <Patricia@discussions.microsoft.com> wrote in message news:BB39ED77-E877-4B60-B3D7-8A00CE153BC5@microsoft.com... I am using XP pro. Yesterday it gave me a spooler problem when trying to print. I restarted the computer and it has now wiped out all the printers there. I cannot get into the services to see whether the spooler function needs to be restarted as it gives an error message snap-in failed to initialise. I wanted to restore and this function is just not there. In properties it has been turned on, but if I go to Accessories it doesn't show. I have been on the Help and Support, but the system restore wizard will not start. I would be grateful of any help.thanks -- Patricia
Guest Patricia Posted August 7, 2007 Posted August 7, 2007 Re: snap-in failed to initialize hi Ramesh It accepted this instruction and all printers were back in printer folder, but then 2 secs later came up with message Spooler Subsystem App has encountered a problem and needs to close. We are sorry for the inconvenience. It will not allow any printing to occur and will not cancel any printing jobs pending. And the printer folder again appears to be empty. If I go services.msc it gives the error message snap-in failed to initialize. Name Services CLSID:{58221C66-EA27-11CF-ADCF-00AA00A80033} hope this explains it better regards -- Patricia "Ramesh, MS-MVP" wrote: > Hi Patricia, > > You can start the Spooler service using the NET.. Command. > > Click Start, Run and type: > > cmd /k net start spooler > > Press {ENTER} > > >> gives an error message snap-in failed to initialise. > > Posting the exact error message and the GUID code would help. > > -- > Regards, > > Ramesh Srinivasan, Microsoft MVP [Windows Shell/User] > Windows® Troubleshooting http://www.winhelponline.com > > > "Patricia" <Patricia@discussions.microsoft.com> wrote in message news:BB39ED77-E877-4B60-B3D7-8A00CE153BC5@microsoft.com... > I am using XP pro. Yesterday it gave me a spooler problem when trying to > print. I restarted the computer and it has now wiped out all the printers > there. > > I cannot get into the services to see whether the spooler function needs to > be restarted as it gives an error message snap-in failed to initialise. > > I wanted to restore and this function is just not there. In properties it > has been turned on, but if I go to Accessories it doesn't show. > > I have been on the Help and Support, but the system restore wizard will not > start. > > I would be grateful of any help.thanks > -- > Patricia >
Guest Ramesh, MS-MVP Posted August 8, 2007 Posted August 8, 2007 Re: snap-in failed to initialize Hi Patricia, There are some Microsoft KBs that address the Spooler issue. Check: http://www.google.com/search?q=Spooler%20Subsystem%20problem+site:support.microsoft.com >> snap-in failed to initialize. For the snap-in issue, try this: Click Start, Run and type: regsvr32 filemgmt.dll Press {ENTER} You should see the following output/message: "DllRegisterServer in filemgmt.dll succeeded." Click OK. See if you're able to launch Services MMC now. -- Regards, Ramesh Srinivasan, Microsoft MVP [Windows Shell/User] Windows® Troubleshooting http://www.winhelponline.com "Patricia" <Patricia@discussions.microsoft.com> wrote in message news:7CBDEEEE-3286-4203-91DE-CE5483D612A2@microsoft.com... hi Ramesh It accepted this instruction and all printers were back in printer folder, but then 2 secs later came up with message Spooler Subsystem App has encountered a problem and needs to close. We are sorry for the inconvenience. It will not allow any printing to occur and will not cancel any printing jobs pending. And the printer folder again appears to be empty. If I go services.msc it gives the error message snap-in failed to initialize. Name Services CLSID:{58221C66-EA27-11CF-ADCF-00AA00A80033} hope this explains it better regards -- Patricia "Ramesh, MS-MVP" wrote: > Hi Patricia, > > You can start the Spooler service using the NET.. Command. > > Click Start, Run and type: > > cmd /k net start spooler > > Press {ENTER} > > >> gives an error message snap-in failed to initialise. > > Posting the exact error message and the GUID code would help. > > -- > Regards, > > Ramesh Srinivasan, Microsoft MVP [Windows Shell/User] > Windows® Troubleshooting http://www.winhelponline.com > > > "Patricia" <Patricia@discussions.microsoft.com> wrote in message news:BB39ED77-E877-4B60-B3D7-8A00CE153BC5@microsoft.com... > I am using XP pro. Yesterday it gave me a spooler problem when trying to > print. I restarted the computer and it has now wiped out all the printers > there. > > I cannot get into the services to see whether the spooler function needs to > be restarted as it gives an error message snap-in failed to initialise. > > I wanted to restore and this function is just not there. In properties it > has been turned on, but if I go to Accessories it doesn't show. > > I have been on the Help and Support, but the system restore wizard will not > start. > > I would be grateful of any help.thanks > -- > Patricia >
Guest Patricia Posted August 8, 2007 Posted August 8, 2007 Re: snap-in failed to initialize hi Ramesh I looked at some of the solutions and from Article ID : 324757 Cannot get into services manager, but went and completed steps 2 to 11 but could not follow step 13 as cannot access “manage” I have deleted one of the printers and reloaded it, but it will still not print, it says that it is waiting for info from the printer. If I try to run the reg server it comes up with this error message LoadLibrary(“filemgmt.dll”) failed – the specified module could not be found I also cannot load pastel 2007 as it gives a run-time error message as it cannot find WBtr32.dll. Are these problems all related? Is it time to reload windows or is there some way I can run a repair thanks regards -- Patricia "Ramesh, MS-MVP" wrote: > Hi Patricia, > > There are some Microsoft KBs that address the Spooler issue. Check: > http://www.google.com/search?q=Spooler%20Subsystem%20problem+site:support.microsoft.com > > >> snap-in failed to initialize. > > For the snap-in issue, try this: > > Click Start, Run and type: > > regsvr32 filemgmt.dll > > Press {ENTER} > > You should see the following output/message: > > "DllRegisterServer in filemgmt.dll succeeded." > > Click OK. > > See if you're able to launch Services MMC now. > > > -- > Regards, > > Ramesh Srinivasan, Microsoft MVP [Windows Shell/User] > Windows® Troubleshooting http://www.winhelponline.com > > > "Patricia" <Patricia@discussions.microsoft.com> wrote in message news:7CBDEEEE-3286-4203-91DE-CE5483D612A2@microsoft.com... > hi Ramesh > > It accepted this instruction and all printers were back in printer folder, > but then 2 secs later came up with message Spooler Subsystem App has > encountered a problem and needs to close. We are sorry for the inconvenience. > > It will not allow any printing to occur and will not cancel any printing > jobs pending. And the printer folder again appears to be empty. > > If I go services.msc it gives the error message snap-in failed to > initialize. Name Services CLSID:{58221C66-EA27-11CF-ADCF-00AA00A80033} > > hope this explains it better > regards > -- > Patricia > > > "Ramesh, MS-MVP" wrote: > > > Hi Patricia, > > > > You can start the Spooler service using the NET.. Command. > > > > Click Start, Run and type: > > > > cmd /k net start spooler > > > > Press {ENTER} > > > > >> gives an error message snap-in failed to initialise. > > > > Posting the exact error message and the GUID code would help. > > > > -- > > Regards, > > > > Ramesh Srinivasan, Microsoft MVP [Windows Shell/User] > > Windows® Troubleshooting http://www.winhelponline.com > > > > > > "Patricia" <Patricia@discussions.microsoft.com> wrote in message news:BB39ED77-E877-4B60-B3D7-8A00CE153BC5@microsoft.com... > > I am using XP pro. Yesterday it gave me a spooler problem when trying to > > print. I restarted the computer and it has now wiped out all the printers > > there. > > > > I cannot get into the services to see whether the spooler function needs to > > be restarted as it gives an error message snap-in failed to initialise. > > > > I wanted to restore and this function is just not there. In properties it > > has been turned on, but if I go to Accessories it doesn't show. > > > > I have been on the Help and Support, but the system restore wizard will not > > start. > > > > I would be grateful of any help.thanks > > -- > > Patricia > > >
Guest Ramesh, MS-MVP Posted August 8, 2007 Posted August 8, 2007 Re: snap-in failed to initialize Try including the full path, such as: regsvr32 %windir%\system32\filemgmt.dll -- Regards, Ramesh Srinivasan, Microsoft MVP [Windows Shell/User] Windows® Troubleshooting http://www.winhelponline.com "Patricia" <Patricia@discussions.microsoft.com> wrote in message news:C015B805-54A6-40D9-B8F0-FA3872EDAE98@microsoft.com... hi Ramesh I looked at some of the solutions and from Article ID : 324757 Cannot get into services manager, but went and completed steps 2 to 11 but could not follow step 13 as cannot access “manage” I have deleted one of the printers and reloaded it, but it will still not print, it says that it is waiting for info from the printer. If I try to run the reg server it comes up with this error message LoadLibrary(“filemgmt.dll”) failed – the specified module could not be found I also cannot load pastel 2007 as it gives a run-time error message as it cannot find WBtr32.dll. Are these problems all related? Is it time to reload windows or is there some way I can run a repair thanks regards -- Patricia "Ramesh, MS-MVP" wrote: > Hi Patricia, > > There are some Microsoft KBs that address the Spooler issue. Check: > http://www.google.com/search?q=Spooler%20Subsystem%20problem+site:support.microsoft.com > > >> snap-in failed to initialize. > > For the snap-in issue, try this: > > Click Start, Run and type: > > regsvr32 filemgmt.dll > > Press {ENTER} > > You should see the following output/message: > > "DllRegisterServer in filemgmt.dll succeeded." > > Click OK. > > See if you're able to launch Services MMC now. > > > -- > Regards, > > Ramesh Srinivasan, Microsoft MVP [Windows Shell/User] > Windows® Troubleshooting http://www.winhelponline.com > > > "Patricia" <Patricia@discussions.microsoft.com> wrote in message news:7CBDEEEE-3286-4203-91DE-CE5483D612A2@microsoft.com... > hi Ramesh > > It accepted this instruction and all printers were back in printer folder, > but then 2 secs later came up with message Spooler Subsystem App has > encountered a problem and needs to close. We are sorry for the inconvenience. > > It will not allow any printing to occur and will not cancel any printing > jobs pending. And the printer folder again appears to be empty. > > If I go services.msc it gives the error message snap-in failed to > initialize. Name Services CLSID:{58221C66-EA27-11CF-ADCF-00AA00A80033} > > hope this explains it better > regards > -- > Patricia > > > "Ramesh, MS-MVP" wrote: > > > Hi Patricia, > > > > You can start the Spooler service using the NET.. Command. > > > > Click Start, Run and type: > > > > cmd /k net start spooler > > > > Press {ENTER} > > > > >> gives an error message snap-in failed to initialise. > > > > Posting the exact error message and the GUID code would help. > > > > -- > > Regards, > > > > Ramesh Srinivasan, Microsoft MVP [Windows Shell/User] > > Windows® Troubleshooting http://www.winhelponline.com > > > > > > "Patricia" <Patricia@discussions.microsoft.com> wrote in message news:BB39ED77-E877-4B60-B3D7-8A00CE153BC5@microsoft.com... > > I am using XP pro. Yesterday it gave me a spooler problem when trying to > > print. I restarted the computer and it has now wiped out all the printers > > there. > > > > I cannot get into the services to see whether the spooler function needs to > > be restarted as it gives an error message snap-in failed to initialise. > > > > I wanted to restore and this function is just not there. In properties it > > has been turned on, but if I go to Accessories it doesn't show. > > > > I have been on the Help and Support, but the system restore wizard will not > > start. > > > > I would be grateful of any help.thanks > > -- > > Patricia > > >
Guest Patricia Posted August 12, 2007 Posted August 12, 2007 Re: snap-in failed to initialize Hi Ramesh I have sorted out the pastel 2007 problem by reloading pervasive v8.6 and this has now sorted out the printer problem. I still can't get into file manager, but at least the computer is now functional. Many thanks -- Patricia "Ramesh, MS-MVP" wrote: > Try including the full path, such as: > > regsvr32 %windir%\system32\filemgmt.dll > > -- > Regards, > > Ramesh Srinivasan, Microsoft MVP [Windows Shell/User] > Windows® Troubleshooting http://www.winhelponline.com > > > "Patricia" <Patricia@discussions.microsoft.com> wrote in message news:C015B805-54A6-40D9-B8F0-FA3872EDAE98@microsoft.com... > hi Ramesh > > I looked at some of the solutions and from Article ID : 324757 > Cannot get into services manager, but went and completed steps 2 to 11 but > could not follow step 13 as cannot access “manage” I have deleted one of the > printers and reloaded it, but it will still not print, it says that it is > waiting for info from the printer. > > If I try to run the reg server it comes up with this error message > LoadLibrary(“filemgmt.dll”) failed – the specified module could not be found > > I also cannot load pastel 2007 as it gives a run-time error message as it > cannot find WBtr32.dll. Are these problems all related? > > Is it time to reload windows or is there some way I can run a repair > > thanks > regards > > > -- > Patricia > > > "Ramesh, MS-MVP" wrote: > > > Hi Patricia, > > > > There are some Microsoft KBs that address the Spooler issue. Check: > > http://www.google.com/search?q=Spooler%20Subsystem%20problem+site:support.microsoft.com > > > > >> snap-in failed to initialize. > > > > For the snap-in issue, try this: > > > > Click Start, Run and type: > > > > regsvr32 filemgmt.dll > > > > Press {ENTER} > > > > You should see the following output/message: > > > > "DllRegisterServer in filemgmt.dll succeeded." > > > > Click OK. > > > > See if you're able to launch Services MMC now. > > > > > > -- > > Regards, > > > > Ramesh Srinivasan, Microsoft MVP [Windows Shell/User] > > Windows® Troubleshooting http://www.winhelponline.com > > > > > > "Patricia" <Patricia@discussions.microsoft.com> wrote in message news:7CBDEEEE-3286-4203-91DE-CE5483D612A2@microsoft.com... > > hi Ramesh > > > > It accepted this instruction and all printers were back in printer folder, > > but then 2 secs later came up with message Spooler Subsystem App has > > encountered a problem and needs to close. We are sorry for the inconvenience. > > > > It will not allow any printing to occur and will not cancel any printing > > jobs pending. And the printer folder again appears to be empty. > > > > If I go services.msc it gives the error message snap-in failed to > > initialize. Name Services CLSID:{58221C66-EA27-11CF-ADCF-00AA00A80033} > > > > hope this explains it better > > regards > > -- > > Patricia > > > > > > "Ramesh, MS-MVP" wrote: > > > > > Hi Patricia, > > > > > > You can start the Spooler service using the NET.. Command. > > > > > > Click Start, Run and type: > > > > > > cmd /k net start spooler > > > > > > Press {ENTER} > > > > > > >> gives an error message snap-in failed to initialise. > > > > > > Posting the exact error message and the GUID code would help. > > > > > > -- > > > Regards, > > > > > > Ramesh Srinivasan, Microsoft MVP [Windows Shell/User] > > > Windows® Troubleshooting http://www.winhelponline.com > > > > > > > > > "Patricia" <Patricia@discussions.microsoft.com> wrote in message news:BB39ED77-E877-4B60-B3D7-8A00CE153BC5@microsoft.com... > > > I am using XP pro. Yesterday it gave me a spooler problem when trying to > > > print. I restarted the computer and it has now wiped out all the printers > > > there. > > > > > > I cannot get into the services to see whether the spooler function needs to > > > be restarted as it gives an error message snap-in failed to initialise. > > > > > > I wanted to restore and this function is just not there. In properties it > > > has been turned on, but if I go to Accessories it doesn't show. > > > > > > I have been on the Help and Support, but the system restore wizard will not > > > start. > > > > > > I would be grateful of any help.thanks > > > -- > > > Patricia > > > > > >
Recommended Posts