Guest Lily Posted September 2, 2007 Posted September 2, 2007 I have an HP laptop with XP Home and SP2. When attaching ANY new devices via a USB port, I keep getting a message 'Cannot install this hardware - USB Device - The data is invalid'. My USB mouse and printer continue to work OK but I now cannot install/attach any new USB device. This happens with my mobile phone, PCTV USB stick and with a new Garmin Sat Nav system I have just bought. I have tried restoring my system to an earlier time but as this has happened for some time, I dont know what date this problem started happening. Also I have installed quite a bit of software in the last month and dont want to have to reinstall it all again. I have read Microsoft's article 810882 on this subject and have followed their instructions.....but having gone through all the driver.cab renaming etc, the problem still occurs. I have also tried uninstalling the USB hubs via device manager (several times) but the system freezes and eventually advised that 'not responding' Can anyone please help me solve this problem - PLEASE. Lily
Guest R. McCarty Posted September 2, 2007 Posted September 2, 2007 Re: Cannot install any new USB device You may have an issue with "Phantom" USB device entries or a device identified as "Unknown" in your USB category of DevMgr. Fairly complicated to resolve, involving adding a new Environment Variable and removing certain device entries. I'd recommend that before you take any more actions you ensure data is backed up or the System is imaged. Unfortunately, because of the message you indicated it's not possible to give you exact steps to resolve. One of those "Need to See it" type problems. This may be a problem that requires manual editing of the Registry. "Lily" <Lily@discussions.microsoft.com> wrote in message news:C6C2B2AD-4EC2-4B9F-8629-64CDDDF097F2@microsoft.com... >I have an HP laptop with XP Home and SP2. > > When attaching ANY new devices via a USB port, I keep getting a message > 'Cannot > install this hardware - USB Device - The data is invalid'. My USB mouse > and > printer continue to work OK but I now cannot install/attach any new USB > device. This happens with my mobile phone, PCTV USB stick and with a new > Garmin Sat Nav system I have just bought. > > I have tried restoring my system to an earlier time but as this has > happened for some time, I dont know what date this problem started > happening. > Also I have installed quite a bit of software in the last month and dont > want to > have to reinstall it all again. > > I have read Microsoft's article 810882 on this subject and have followed > their instructions.....but having gone through all the driver.cab renaming > etc, the problem still occurs. > > I have also tried uninstalling the USB hubs via device manager (several > times) but the system freezes and eventually advised that 'not responding' > > Can anyone please help me solve this problem - PLEASE. > > Lily
Guest Lily Posted September 2, 2007 Posted September 2, 2007 Re: Cannot install any new USB device Thanks for your response. A couple of extra bits of info. When I attach a new USB device, it recognises the device by name but says 'There was an error during the installation of this device. The data is invalid.' Secondly, if I look at Device Manager, it is not recognised as a USB device but as Other (with the yellow questions mark against it). What am I looking for if I have to edit the registry (which fills me with fear!) Lily "R. McCarty" wrote: > You may have an issue with "Phantom" USB device entries or a > device identified as "Unknown" in your USB category of DevMgr. > Fairly complicated to resolve, involving adding a new Environment > Variable and removing certain device entries. I'd recommend that > before you take any more actions you ensure data is backed up or > the System is imaged. Unfortunately, because of the message you > indicated it's not possible to give you exact steps to resolve. One > of those "Need to See it" type problems. This may be a problem > that requires manual editing of the Registry. > > "Lily" <Lily@discussions.microsoft.com> wrote in message > news:C6C2B2AD-4EC2-4B9F-8629-64CDDDF097F2@microsoft.com... > >I have an HP laptop with XP Home and SP2. > > > > When attaching ANY new devices via a USB port, I keep getting a message > > 'Cannot > > install this hardware - USB Device - The data is invalid'. My USB mouse > > and > > printer continue to work OK but I now cannot install/attach any new USB > > device. This happens with my mobile phone, PCTV USB stick and with a new > > Garmin Sat Nav system I have just bought. > > > > I have tried restoring my system to an earlier time but as this has > > happened for some time, I dont know what date this problem started > > happening. > > Also I have installed quite a bit of software in the last month and dont > > want to > > have to reinstall it all again. > > > > I have read Microsoft's article 810882 on this subject and have followed > > their instructions.....but having gone through all the driver.cab renaming > > etc, the problem still occurs. > > > > I have also tried uninstalling the USB hubs via device manager (several > > times) but the system freezes and eventually advised that 'not responding' > > > > Can anyone please help me solve this problem - PLEASE. > > > > Lily > > >
Guest R. McCarty Posted September 2, 2007 Posted September 2, 2007 Re: Cannot install any new USB device Is your system fully patched (SP2, & the 82 or so updates) ? "Lily" <Lily@discussions.microsoft.com> wrote in message news:198CE271-5570-4616-92A7-5BC3E2BCD592@microsoft.com... > Thanks for your response. A couple of extra bits of info. > > When I attach a new USB device, it recognises the device by name but says > 'There was an error during the installation of this device. The data is > invalid.' > Secondly, if I look at Device Manager, it is not recognised as a USB > device > but as Other (with the yellow questions mark against it). > > What am I looking for if I have to edit the registry (which fills me with > fear!) > > Lily > > "R. McCarty" wrote: > >> You may have an issue with "Phantom" USB device entries or a >> device identified as "Unknown" in your USB category of DevMgr. >> Fairly complicated to resolve, involving adding a new Environment >> Variable and removing certain device entries. I'd recommend that >> before you take any more actions you ensure data is backed up or >> the System is imaged. Unfortunately, because of the message you >> indicated it's not possible to give you exact steps to resolve. One >> of those "Need to See it" type problems. This may be a problem >> that requires manual editing of the Registry. >> >> "Lily" <Lily@discussions.microsoft.com> wrote in message >> news:C6C2B2AD-4EC2-4B9F-8629-64CDDDF097F2@microsoft.com... >> >I have an HP laptop with XP Home and SP2. >> > >> > When attaching ANY new devices via a USB port, I keep getting a message >> > 'Cannot >> > install this hardware - USB Device - The data is invalid'. My USB >> > mouse >> > and >> > printer continue to work OK but I now cannot install/attach any new USB >> > device. This happens with my mobile phone, PCTV USB stick and with a >> > new >> > Garmin Sat Nav system I have just bought. >> > >> > I have tried restoring my system to an earlier time but as this has >> > happened for some time, I dont know what date this problem started >> > happening. >> > Also I have installed quite a bit of software in the last month and >> > dont >> > want to >> > have to reinstall it all again. >> > >> > I have read Microsoft's article 810882 on this subject and have >> > followed >> > their instructions.....but having gone through all the driver.cab >> > renaming >> > etc, the problem still occurs. >> > >> > I have also tried uninstalling the USB hubs via device manager (several >> > times) but the system freezes and eventually advised that 'not >> > responding' >> > >> > Can anyone please help me solve this problem - PLEASE. >> > >> > Lily >> >> >>
Guest Plato Posted September 3, 2007 Posted September 3, 2007 Re: Cannot install any new USB device =?Utf-8?B?TGlseQ==?= wrote: > > I have also tried uninstalling the USB hubs via device manager (several > times) but the system freezes and eventually advised that 'not responding' Perhaps you need a powored USB hub. -- http://www.bootdisk.com/
Guest Lily Posted September 3, 2007 Posted September 3, 2007 Re: Cannot install any new USB device Yes, I have SP2 and all the latest updates/patches. I have also tried connecting the new devices through the USB ports on the computer and on the Belkin powered USB hub which is supporting my printer, external hard drive and mouse (one other slot available). If I use one of these devices on one of the computer USB hub, it works OK. It is only new USB devices that will not install/be recognised. HELP!!! Thanks in advance Lily > Is your system fully patched (SP2, & the 82 or so updates) ? > > "Lily" <Lily@discussions.microsoft.com> wrote in message > news:198CE271-5570-4616-92A7-5BC3E2BCD592@microsoft.com... > > Thanks for your response. A couple of extra bits of info. > > > > When I attach a new USB device, it recognises the device by name but says > > 'There was an error during the installation of this device. The data is > > invalid.' > > Secondly, if I look at Device Manager, it is not recognised as a USB > > device > > but as Other (with the yellow questions mark against it). > > > > What am I looking for if I have to edit the registry (which fills me with > > fear!) > > > > Lily > > > > "R. McCarty" wrote: > > > >> You may have an issue with "Phantom" USB device entries or a > >> device identified as "Unknown" in your USB category of DevMgr. > >> Fairly complicated to resolve, involving adding a new Environment > >> Variable and removing certain device entries. I'd recommend that > >> before you take any more actions you ensure data is backed up or > >> the System is imaged. Unfortunately, because of the message you > >> indicated it's not possible to give you exact steps to resolve. One > >> of those "Need to See it" type problems. This may be a problem > >> that requires manual editing of the Registry. > >> > >> "Lily" <Lily@discussions.microsoft.com> wrote in message > >> news:C6C2B2AD-4EC2-4B9F-8629-64CDDDF097F2@microsoft.com... > >> >I have an HP laptop with XP Home and SP2. > >> > > >> > When attaching ANY new devices via a USB port, I keep getting a message > >> > 'Cannot > >> > install this hardware - USB Device - The data is invalid'. My USB > >> > mouse > >> > and > >> > printer continue to work OK but I now cannot install/attach any new USB > >> > device. This happens with my mobile phone, PCTV USB stick and with a > >> > new > >> > Garmin Sat Nav system I have just bought. > >> > > >> > I have tried restoring my system to an earlier time but as this has > >> > happened for some time, I dont know what date this problem started > >> > happening. > >> > Also I have installed quite a bit of software in the last month and > >> > dont > >> > want to > >> > have to reinstall it all again. > >> > > >> > I have read Microsoft's article 810882 on this subject and have > >> > followed > >> > their instructions.....but having gone through all the driver.cab > >> > renaming > >> > etc, the problem still occurs. > >> > > >> > I have also tried uninstalling the USB hubs via device manager (several > >> > times) but the system freezes and eventually advised that 'not > >> > responding' > >> > > >> > Can anyone please help me solve this problem - PLEASE. > >> > > >> > Lily > >> > >> > >> > > >
Recommended Posts