Guest snakesboy Posted September 5, 2007 Posted September 5, 2007 Hi I have a news backup tape but can't use ,at storage and libraries can see the tape but when start a backup job use NTbackup ,it warning haven't have free media .How can I solved the problem Best Regards
Guest Meinolf Weber Posted September 5, 2007 Posted September 5, 2007 Re: NTBACKUP Problem Hello snakesboy, Did you check that the tape is compatible with the tapedrive? I had this with a HP Library, it was only able to reed old tapes and for writing i needed a newer version of the tape. Best regards Meinolf Weber Disclaimer: This posting is provided "AS IS" with no warranties, and confers no rights. > Hi > > I have a news backup tape but can't use ,at storage and libraries can > see the tape but when start a backup job use NTbackup ,it warning > haven't have free media .How can I solved the problem > > Best Regards >
Guest Joe Posted September 19, 2007 Posted September 19, 2007 RE: NTBACKUP Problem Hy, I had a problem like this one in a Windows 2003 server and it was solved following these steps: 1) Stop the RSM process; 2) Rename the directory c:\windows\system32\NtmsData to OldNtmsData 3) Start the RSM process and wait the tape library finish its inventory. Don't use any other management software to acess the library. It may put the library in a loop process when used together with RSM. After the inventory has been concluded, go to NTBackup utility and try to backup something. In my case, I'm still trying to solve the restore problem, it gives me the message: Restore Status Operation: Restore Error: The device reported an error on a request to read data from media. Error reported: Hardware failure. There may be a hardware or media problem. Please check the system event log for relevant failures. ---------------------- I hope this helps you. Joe. "snakesboy" wrote: > Hi > > I have a news backup tape but can't use ,at storage and libraries can > see the tape but when start a backup job use NTbackup ,it warning > haven't have free media .How can I solved the problem > > Best Regards > >
Recommended Posts