Guest SuperSlueth Posted September 7, 2007 Posted September 7, 2007 I have 3 servers in the office all servrer 2003 each with 2 NICs each server has it's own public and private IP address Primary domain controller / DHCP 192.168.1.10 x.x.x.162 File sever 192.168.1.20 x.x.x.163 exchanger server 192.168.1.30 x.x.x.164 i have the 2 different subnets on different switches what do do about different default gateways the aim is to get people inside and outside office to be able to access all the servers. does anyone have any docs about setting up multiple servers with multiple NIC's on different subnets
Guest Mathieu CHATEAU Posted September 7, 2007 Posted September 7, 2007 Re: Networking Hello, Set the internal card as primary in the advanced tab of the network pane. Does people inside need to get through a gateway ? aren't thet on the local network ? You would add static route to reach all internal subnet. Let's the default gateway to the internet router -- Cordialement, Mathieu CHATEAU http://lordoftheping.blogspot.com "SuperSlueth" <SuperSlueth@discussions.microsoft.com> wrote in message news:26D29A50-1C2F-42F6-BF5D-1FE14B19603F@microsoft.com... >I have 3 servers in the office all servrer 2003 each with 2 NICs > each server has it's own public and private IP address > Primary domain controller / DHCP 192.168.1.10 x.x.x.162 > File sever 192.168.1.20 x.x.x.163 > exchanger server 192.168.1.30 x.x.x.164 > i have the 2 different subnets on different switches > what do do about different default gateways > the aim is to get people inside and outside office to be able to access > all > the servers. > does anyone have any docs about setting up multiple servers with multiple > NIC's on different subnets
Recommended Posts