Guest ckwong19802003@yahoo.com Posted September 8, 2007 Posted September 8, 2007 hi I m doing a test for netbios and it is stuck with error code5 which is access deny below are some of the information Machine name: test ip : 10.208.10.100 i add an entry inside the lmhost file with 10.208.10.100 server01 when i do try to map to server01 it prompt me with the password and i seem cant to connect to it.Kindly advise
Guest Robert L [MVP - Networking] Posted September 8, 2007 Posted September 8, 2007 Re: lmhost problem System error 5 is permission issue. So it is nothing to do with lmhost. Ii would double check the permission. Or this search result may help, System ErrorsIf the net view command fails with a "System error 5 has occurred. .... 2. when using net view \\hostname, you may receive "System error 5 has occurred. ... http://www.chicagotech.net/systemerrors.htm Bob Lin, MS-MVP, MCSE & CNE Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com <ckwong19802003@yahoo.com> wrote in message news:E6890506-42AB-4549-976D-A7C8F4979F8A@microsoft.com... hi I m doing a test for netbios and it is stuck with error code5 which is access deny below are some of the information Machine name: test ip : 10.208.10.100 i add an entry inside the lmhost file with 10.208.10.100 server01 when i do try to map to server01 it prompt me with the password and i seem cant to connect to it.Kindly advise
Guest ckwong19802003@yahoo.com Posted September 8, 2007 Posted September 8, 2007 Re: lmhost problem hi as you seen my hostname is test(ip=10.208.10.1) and when you do a net view \\test it wont get the system error 5 and when you do add another name on the lmhost with server01(10.208.10.1) and you do a net view\\server01 you will get system error 5.Any idea on that? "Robert L [MVP - Networking]" wrote: > System error 5 is permission issue. So it is nothing to do with lmhost. Ii would double check the permission. Or this search result may help, > > System ErrorsIf the net view command fails with a "System error 5 has occurred. .... 2. when using net view \\hostname, you may receive "System error 5 has occurred. ... > http://www.chicagotech.net/systemerrors.htm > > > Bob Lin, MS-MVP, MCSE & CNE > Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net > How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com > <ckwong19802003@yahoo.com> wrote in message news:E6890506-42AB-4549-976D-A7C8F4979F8A@microsoft.com... > hi > > I m doing a test for netbios and it is stuck with error code5 which is > access deny > > below are some of the information > Machine name: test > ip : 10.208.10.100 > > i add an entry inside the lmhost file with > 10.208.10.100 server01 > > when i do try to map to server01 it prompt me with the password and i seem > cant to connect to it.Kindly advise
Guest Robert L [MVP - Networking] Posted September 8, 2007 Posted September 8, 2007 Re: lmhost problem What are the results if you do "ping -a 10.20.8.10.1" and "ping server01"? Bob Lin, MS-MVP, MCSE & CNE Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com <ckwong19802003@yahoo.com> wrote in message news:CD090207-BED2-4E6D-8BBB-3BFA949EF6F4@microsoft.com... hi as you seen my hostname is test(ip=10.208.10.1) and when you do a net view \\test it wont get the system error 5 and when you do add another name on the lmhost with server01(10.208.10.1) and you do a net view\\server01 you will get system error 5.Any idea on that? "Robert L [MVP - Networking]" wrote: > System error 5 is permission issue. So it is nothing to do with lmhost. Ii would double check the permission. Or this search result may help, > > System ErrorsIf the net view command fails with a "System error 5 has occurred. .... 2. when using net view \\hostname, you may receive "System error 5 has occurred. ... > http://www.chicagotech.net/systemerrors.htm > > > Bob Lin, MS-MVP, MCSE & CNE > Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net > How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com > <ckwong19802003@yahoo.com> wrote in message news:E6890506-42AB-4549-976D-A7C8F4979F8A@microsoft.com... > hi > > I m doing a test for netbios and it is stuck with error code5 which is > access deny > > below are some of the information > Machine name: test > ip : 10.208.10.100 > > i add an entry inside the lmhost file with > 10.208.10.100 server01 > > when i do try to map to server01 it prompt me with the password and i seem > cant to connect to it.Kindly advise
Guest ckwong19802003@yahoo.com Posted September 9, 2007 Posted September 9, 2007 Re: lmhost problem hello I can ping the 10.208.10.1 or server01.Kindly advise "Robert L [MVP - Networking]" wrote: > What are the results if you do "ping -a 10.20.8.10.1" and "ping server01"? > > Bob Lin, MS-MVP, MCSE & CNE > Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net > How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com > <ckwong19802003@yahoo.com> wrote in message news:CD090207-BED2-4E6D-8BBB-3BFA949EF6F4@microsoft.com... > hi > > as you seen my hostname is test(ip=10.208.10.1) and when you do a net view > \\test it wont get the system error 5 and when you do add another name on the > lmhost with server01(10.208.10.1) and you do a net view\\server01 you will > get system error 5.Any idea on that? > > > "Robert L [MVP - Networking]" wrote: > > > System error 5 is permission issue. So it is nothing to do with lmhost. Ii would double check the permission. Or this search result may help, > > > > System ErrorsIf the net view command fails with a "System error 5 has occurred. .... 2. when using net view \\hostname, you may receive "System error 5 has occurred. ... > > http://www.chicagotech.net/systemerrors.htm > > > > > > Bob Lin, MS-MVP, MCSE & CNE > > Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net > > How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com > > <ckwong19802003@yahoo.com> wrote in message news:E6890506-42AB-4549-976D-A7C8F4979F8A@microsoft.com... > > hi > > > > I m doing a test for netbios and it is stuck with error code5 which is > > access deny > > > > below are some of the information > > Machine name: test > > ip : 10.208.10.100 > > > > i add an entry inside the lmhost file with > > 10.208.10.100 server01 > > > > when i do try to map to server01 it prompt me with the password and i seem > > cant to connect to it.Kindly advise
Recommended Posts