Guest Brooklyn Posted September 10, 2007 Posted September 10, 2007 I loaded software for a Lexmark P6259 All-in-one but the system does not see the drivers or that it is connectes to a USB port. Software & Drivers were downloaded from Lexmark website -- Brooklyn
Guest Mark F. Posted September 10, 2007 Posted September 10, 2007 Re: Lexmark P6250 All in One "Brooklyn" <Brooklyn@discussions.microsoft.com> wrote in message news:B3936F4B-4628-40D5-B214-04198917FFC0@microsoft.com... >I loaded software for a Lexmark P6259 All-in-one but the system does not >see > the drivers or that it is connectes to a USB port. Software & Drivers were > downloaded from Lexmark website > -- > Brooklyn Did you follow the installation instructions exactly? Software is installed _before_ the USB device is connected. The setup tells you to install software, then connect the printer. If you did this in reverse the result is what you described. Step #6 of the setup guide describes plugging in the cable after you install the Windows software. Setup Guide: http://www.lexmark.com/publications/eng/6200/index.html Uninstall the software. Unplug the printer and the USB cable. Shutdown the computer for ten seconds (not a reboot). Restart the computer. Install the printer as described in the guide. Should work. Mark
Recommended Posts