Guest Tim Posted September 15, 2007 Posted September 15, 2007 Can't figure this one out...I have a new sata (Maxtor 500) in my box...I have W2000 installed on the primary IDE drive. Trying to install XP on my new Sata...can get it to format via setup...and have the sata drives floppy available...but...it has frozen during install 6 times ! Usually freezes up during 'loading files' phase...but once got all the way to the splash screen with the five buttons...froze during the #3 button..."installing windows" Tried installing Windows 2000 on the sata drive...installed fine. Formatted the IDE (with the old W2000 installation) and XP installed fine on the IDE drive...no freezes ? Anyone have an idea why I can not install XP Pro directly to the Sata drive...?...I have all the drives...etc...but XP install continually freezes during the copying files and/or splash screen after starting windows message ? Thanks, Tim R
Guest mr x Posted September 15, 2007 Posted September 15, 2007 Re: XP install freezes during sata drive install ? "Tim" <trinaz@yahoo.com> wrote in message news:Ot4hxP79HHA.3900@TK2MSFTNGP02.phx.gbl... > Can't figure this one out...I have a new sata (Maxtor 500) in my box...I > have W2000 installed on the primary IDE drive. Trying to install XP on my > new Sata...can get it to format via setup...and have the sata drives > floppy available...but...it has frozen during install 6 times ! > > Usually freezes up during 'loading files' phase...but once got all the way > to the splash screen with the five buttons...froze during the #3 > button..."installing windows" > > Tried installing Windows 2000 on the sata drive...installed fine. > Formatted the IDE (with the old W2000 installation) and XP installed fine > on the IDE drive...no freezes ? > > Anyone have an idea why I can not install XP Pro directly to the Sata > drive...?...I have all the drives...etc...but XP install continually > freezes during the copying files and/or splash screen after starting > windows message ? > > Thanks, Tim R > I seem to remember that when I set up a mates sata drive I had to press f6 during instalation to install 3rd party driver which was on a floppy that came with the sata drive. http://ask.metafilter.com/45855/Help-me-to-get-WinXP-to-recognise-my-new-SATA-RAID-drive
Guest bbunny Posted September 16, 2007 Posted September 16, 2007 Re: XP install freezes during sata drive install ? "Tim R" <trinaz@cox.net> wrote in message news:eEh%23vo99HHA.5160@TK2MSFTNGP05.phx.gbl... > yes...taht's correct...I have the floppy disk...you couldn't get to the > "installing files" part of the installation without it ! > > My problem is the isntall starts copying all the files...ie...installation > of XP begins to the sata drive...but during this stage...after > verification...etc...the system freezes ? It's not the isntall disk cause > it installs fine to an IDE drive ? > > "mr x" <boomshaka@@hotmail.com> wrote in message > news:78VGi.97702$xp6.37351@fe3.news.blueyonder.co.uk... >> >> "Tim" <trinaz@yahoo.com> wrote in message >> news:Ot4hxP79HHA.3900@TK2MSFTNGP02.phx.gbl... >>> Can't figure this one out...I have a new sata (Maxtor 500) in my box...I >>> have W2000 installed on the primary IDE drive. Trying to install XP on >>> my new Sata...can get it to format via setup...and have the sata drives >>> floppy available...but...it has frozen during install 6 times ! >>> >>> Usually freezes up during 'loading files' phase...but once got all the >>> way to the splash screen with the five buttons...froze during the #3 >>> button..."installing windows" >>> >>> Tried installing Windows 2000 on the sata drive...installed fine. >>> Formatted the IDE (with the old W2000 installation) and XP installed >>> fine on the IDE drive...no freezes ? >>> >>> Anyone have an idea why I can not install XP Pro directly to the Sata >>> drive...?...I have all the drives...etc...but XP install continually >>> freezes during the copying files and/or splash screen after starting >>> windows message ? >>> >>> Thanks, Tim R Make sure the settings are correct in the BIOS. Run memtest86+, all tests. SeaTools diagnostics. (seagate accuired maxtor).
Guest smlunatick Posted September 16, 2007 Posted September 16, 2007 Re: XP install freezes during sata drive install ? On Sep 16, 4:51 pm, "Tim R" <tri...@cox.net> wrote: > yes...taht's correct...I have the floppy disk...you couldn't get to the > "installing files" part of the installation without it ! > > My problem is the isntall starts copying all the files...ie...installation > of XP begins to the sata drive...but during this stage...after > verification...etc...the system freezes ? It's not the isntall disk cause > it installs fine to an IDE drive ? > > "mr x" <boomshaka@@hotmail.com> wrote in message > > news:78VGi.97702$xp6.37351@fe3.news.blueyonder.co.uk... > > > > > > > "Tim" <tri...@yahoo.com> wrote in message > >news:Ot4hxP79HHA.3900@TK2MSFTNGP02.phx.gbl... > >> Can't figure this one out...I have a new sata (Maxtor 500) in my box...I > >> have W2000 installed on the primary IDE drive. Trying to install XP on > >> my new Sata...can get it to format via setup...and have the sata drives > >> floppy available...but...it has frozen during install 6 times ! > > >> Usually freezes up during 'loading files' phase...but once got all the > >> way to the splash screen with the five buttons...froze during the #3 > >> button..."installing windows" > > >> Tried installing Windows 2000 on the sata drive...installed fine. > >> Formatted the IDE (with the old W2000 installation) and XP installed > >> fine on the IDE drive...no freezes ? > > >> Anyone have an idea why I can not install XP Pro directly to the Sata > >> drive...?...I have all the drives...etc...but XP install continually > >> freezes during the copying files and/or splash screen after starting > >> windows message ? > > >> Thanks, Tim R > > > I seem to remember that when I set up a mates sata drive I had to press f6 > > during instalation to install 3rd party driver which was on a floppy that > > came with the sata drive. > > >http://ask.metafilter.com/45855/Help-me-to-get-WinXP-to-recognise-my-...- Hide quoted text - > > - Show quoted text - You must check the BIOS settings in order to tell the PC that the SATA can be used as a boot device. The settings are dependant on which chipset the motherboard uses. Check with the manula or the motherbaord manufacturer's web site.
Guest Tim R Posted September 16, 2007 Posted September 16, 2007 Re: XP install freezes during sata drive install ? yes...taht's correct...I have the floppy disk...you couldn't get to the "installing files" part of the installation without it ! My problem is the isntall starts copying all the files...ie...installation of XP begins to the sata drive...but during this stage...after verification...etc...the system freezes ? It's not the isntall disk cause it installs fine to an IDE drive ? "mr x" <boomshaka@@hotmail.com> wrote in message news:78VGi.97702$xp6.37351@fe3.news.blueyonder.co.uk... > > "Tim" <trinaz@yahoo.com> wrote in message > news:Ot4hxP79HHA.3900@TK2MSFTNGP02.phx.gbl... >> Can't figure this one out...I have a new sata (Maxtor 500) in my box...I >> have W2000 installed on the primary IDE drive. Trying to install XP on >> my new Sata...can get it to format via setup...and have the sata drives >> floppy available...but...it has frozen during install 6 times ! >> >> Usually freezes up during 'loading files' phase...but once got all the >> way to the splash screen with the five buttons...froze during the #3 >> button..."installing windows" >> >> Tried installing Windows 2000 on the sata drive...installed fine. >> Formatted the IDE (with the old W2000 installation) and XP installed >> fine on the IDE drive...no freezes ? >> >> Anyone have an idea why I can not install XP Pro directly to the Sata >> drive...?...I have all the drives...etc...but XP install continually >> freezes during the copying files and/or splash screen after starting >> windows message ? >> >> Thanks, Tim R >> > > I seem to remember that when I set up a mates sata drive I had to press f6 > during instalation to install 3rd party driver which was on a floppy that > came with the sata drive. > > http://ask.metafilter.com/45855/Help-me-to-get-WinXP-to-recognise-my-new-SATA-RAID-drive >
Guest Unknown Posted September 17, 2007 Posted September 17, 2007 Re: XP install freezes during sata drive install ? Check the computer manufacturer for an update to the BIOS. "Tim R" <trinaz@cox.net> wrote in message news:ev3taJV%23HHA.1204@TK2MSFTNGP03.phx.gbl... > hardware settings in bios are all set correctly I think...sata enabled, > seta drive primary boot drive, raid disabled, memory works fine...XP Pro > sp2 installs fine and runs well on the IDE drive...Seta drive visible and > functioning as "d" drive on IDE installation ("c" drive) > > Have also tried install with ide drive disabled/disconnected from > system...same problem ? > > ?? > > "smlunatick" <yveslec@gmail.com> wrote in message > news:1189953017.810289.206610@50g2000hsm.googlegroups.com... >> On Sep 16, 4:51 pm, "Tim R" <tri...@cox.net> wrote: >>> yes...taht's correct...I have the floppy disk...you couldn't get to the >>> "installing files" part of the installation without it ! >>> >>> My problem is the isntall starts copying all the >>> files...ie...installation >>> of XP begins to the sata drive...but during this stage...after >>> verification...etc...the system freezes ? It's not the isntall disk >>> cause >>> it installs fine to an IDE drive ? >>> >>> "mr x" <boomshaka@@hotmail.com> wrote in message >>> >>> news:78VGi.97702$xp6.37351@fe3.news.blueyonder.co.uk... >>> >>> >>> >>> >>> >>> > "Tim" <tri...@yahoo.com> wrote in message >>> >news:Ot4hxP79HHA.3900@TK2MSFTNGP02.phx.gbl... >>> >> Can't figure this one out...I have a new sata (Maxtor 500) in my >>> >> box...I >>> >> have W2000 installed on the primary IDE drive. Trying to install XP >>> >> on >>> >> my new Sata...can get it to format via setup...and have the sata >>> >> drives >>> >> floppy available...but...it has frozen during install 6 times ! >>> >>> >> Usually freezes up during 'loading files' phase...but once got all >>> >> the >>> >> way to the splash screen with the five buttons...froze during the #3 >>> >> button..."installing windows" >>> >>> >> Tried installing Windows 2000 on the sata drive...installed fine. >>> >> Formatted the IDE (with the old W2000 installation) and XP installed >>> >> fine on the IDE drive...no freezes ? >>> >>> >> Anyone have an idea why I can not install XP Pro directly to the Sata >>> >> drive...?...I have all the drives...etc...but XP install continually >>> >> freezes during the copying files and/or splash screen after starting >>> >> windows message ? >>> >>> >> Thanks, Tim R >>> >>> > I seem to remember that when I set up a mates sata drive I had to >>> > press f6 >>> > during instalation to install 3rd party driver which was on a floppy >>> > that >>> > came with the sata drive. >>> >>> >http://ask.metafilter.com/45855/Help-me-to-get-WinXP-to-recognise-my-...- >>> >Hide quoted text - >>> >>> - Show quoted text - >> >> You must check the BIOS settings in order to tell the PC that the SATA >> can be used as a boot device. The settings are dependant on which >> chipset the motherboard uses. Check with the manula or the >> motherbaord manufacturer's web site. >> > >
Guest Gordon Posted September 18, 2007 Posted September 18, 2007 Re: XP install freezes during sata drive install ? "Tim R" <trinaz@cox.net> wrote in message news:ev3taJV%23HHA.1204@TK2MSFTNGP03.phx.gbl... > hardware settings in bios are all set correctly I think... But your clock isn't - look at your Time Zone....
Guest DL Posted September 18, 2007 Posted September 18, 2007 Re: XP install freezes during sata drive install ? Its not going to help matters by starting a new thread in a different ng to the one you allready have running "Tim R" <trinaz@cox.net> wrote in message news:ev3taJV%23HHA.1204@TK2MSFTNGP03.phx.gbl... > hardware settings in bios are all set correctly I think...sata enabled, > seta drive primary boot drive, raid disabled, memory works fine...XP Pro > sp2 installs fine and runs well on the IDE drive...Seta drive visible and > functioning as "d" drive on IDE installation ("c" drive) > > Have also tried install with ide drive disabled/disconnected from > system...same problem ? > > ?? > > "smlunatick" <yveslec@gmail.com> wrote in message > news:1189953017.810289.206610@50g2000hsm.googlegroups.com... >> On Sep 16, 4:51 pm, "Tim R" <tri...@cox.net> wrote: >>> yes...taht's correct...I have the floppy disk...you couldn't get to the >>> "installing files" part of the installation without it ! >>> >>> My problem is the isntall starts copying all the >>> files...ie...installation >>> of XP begins to the sata drive...but during this stage...after >>> verification...etc...the system freezes ? It's not the isntall disk >>> cause >>> it installs fine to an IDE drive ? >>> >>> "mr x" <boomshaka@@hotmail.com> wrote in message >>> >>> news:78VGi.97702$xp6.37351@fe3.news.blueyonder.co.uk... >>> >>> >>> >>> >>> >>> > "Tim" <tri...@yahoo.com> wrote in message >>> >news:Ot4hxP79HHA.3900@TK2MSFTNGP02.phx.gbl... >>> >> Can't figure this one out...I have a new sata (Maxtor 500) in my >>> >> box...I >>> >> have W2000 installed on the primary IDE drive. Trying to install XP >>> >> on >>> >> my new Sata...can get it to format via setup...and have the sata >>> >> drives >>> >> floppy available...but...it has frozen during install 6 times ! >>> >>> >> Usually freezes up during 'loading files' phase...but once got all >>> >> the >>> >> way to the splash screen with the five buttons...froze during the #3 >>> >> button..."installing windows" >>> >>> >> Tried installing Windows 2000 on the sata drive...installed fine. >>> >> Formatted the IDE (with the old W2000 installation) and XP installed >>> >> fine on the IDE drive...no freezes ? >>> >>> >> Anyone have an idea why I can not install XP Pro directly to the Sata >>> >> drive...?...I have all the drives...etc...but XP install continually >>> >> freezes during the copying files and/or splash screen after starting >>> >> windows message ? >>> >>> >> Thanks, Tim R >>> >>> > I seem to remember that when I set up a mates sata drive I had to >>> > press f6 >>> > during instalation to install 3rd party driver which was on a floppy >>> > that >>> > came with the sata drive. >>> >>> >http://ask.metafilter.com/45855/Help-me-to-get-WinXP-to-recognise-my-...- >>> >Hide quoted text - >>> >>> - Show quoted text - >> >> You must check the BIOS settings in order to tell the PC that the SATA >> can be used as a boot device. The settings are dependant on which >> chipset the motherboard uses. Check with the manula or the >> motherbaord manufacturer's web site. >> > >
Guest Tim R Posted September 18, 2007 Posted September 18, 2007 Re: XP install freezes during sata drive install ? hardware settings in bios are all set correctly I think...sata enabled, seta drive primary boot drive, raid disabled, memory works fine...XP Pro sp2 installs fine and runs well on the IDE drive...Seta drive visible and functioning as "d" drive on IDE installation ("c" drive) Have also tried install with ide drive disabled/disconnected from system...same problem ? ?? "smlunatick" <yveslec@gmail.com> wrote in message news:1189953017.810289.206610@50g2000hsm.googlegroups.com... > On Sep 16, 4:51 pm, "Tim R" <tri...@cox.net> wrote: >> yes...taht's correct...I have the floppy disk...you couldn't get to the >> "installing files" part of the installation without it ! >> >> My problem is the isntall starts copying all the >> files...ie...installation >> of XP begins to the sata drive...but during this stage...after >> verification...etc...the system freezes ? It's not the isntall disk >> cause >> it installs fine to an IDE drive ? >> >> "mr x" <boomshaka@@hotmail.com> wrote in message >> >> news:78VGi.97702$xp6.37351@fe3.news.blueyonder.co.uk... >> >> >> >> >> >> > "Tim" <tri...@yahoo.com> wrote in message >> >news:Ot4hxP79HHA.3900@TK2MSFTNGP02.phx.gbl... >> >> Can't figure this one out...I have a new sata (Maxtor 500) in my >> >> box...I >> >> have W2000 installed on the primary IDE drive. Trying to install XP >> >> on >> >> my new Sata...can get it to format via setup...and have the sata >> >> drives >> >> floppy available...but...it has frozen during install 6 times ! >> >> >> Usually freezes up during 'loading files' phase...but once got all the >> >> way to the splash screen with the five buttons...froze during the #3 >> >> button..."installing windows" >> >> >> Tried installing Windows 2000 on the sata drive...installed fine. >> >> Formatted the IDE (with the old W2000 installation) and XP installed >> >> fine on the IDE drive...no freezes ? >> >> >> Anyone have an idea why I can not install XP Pro directly to the Sata >> >> drive...?...I have all the drives...etc...but XP install continually >> >> freezes during the copying files and/or splash screen after starting >> >> windows message ? >> >> >> Thanks, Tim R >> >> > I seem to remember that when I set up a mates sata drive I had to press >> > f6 >> > during instalation to install 3rd party driver which was on a floppy >> > that >> > came with the sata drive. >> >> >http://ask.metafilter.com/45855/Help-me-to-get-WinXP-to-recognise-my-...- >> >Hide quoted text - >> >> - Show quoted text - > > You must check the BIOS settings in order to tell the PC that the SATA > can be used as a boot device. The settings are dependant on which > chipset the motherboard uses. Check with the manula or the > motherbaord manufacturer's web site. >
Recommended Posts