Guest tring2200 Posted September 21, 2007 Posted September 21, 2007 Group, I have tried everything I can think of. I have an IBM x3560 7979 PSG server and I cannot get Windows 2003 or 2000 server to install on this. They both both start setup, say they are loading the files, say setup is starting windows, then goes to the welcome to setup screen. I then have the standard options: ENTER=cotinue, R=Repair, F3=quit I hit enter and it tells me "Setup did not find any hard drives installed in your computer". I have gone to IBM's site, got updated drivers and then stopped dead in my tracks, there is no floppy drive on this system. I have no floppy drive on any of the laptops or desktops I have. I am looking for any help I can get here. I have gome through the MS and IBM site and I am not seeing any other comments like this. Oh and I have three of these and they all do the same thing. Thanks for any help you can send my way, Tim
Guest Meinolf Weber Posted September 21, 2007 Posted September 21, 2007 Re: IBM Server won't install Hello tring2200, Think about to buy an usb floppy drive and provide the needed drivers on this way. Another option is to create a installation disk with integrated drivers. Best regards Meinolf Weber Disclaimer: This posting is provided "AS IS" with no warranties, and confers no rights. > Group, > > I have tried everything I can think of. > > I have an IBM x3560 7979 PSG server and I cannot get Windows 2003 or > 2000 server to install on this. They both both start setup, say they > are loading the files, say setup is starting windows, then goes to the > welcome to setup screen. I then have the standard options: > ENTER=cotinue, R=Repair, F3=quit > > I hit enter and it tells me "Setup did not find any hard drives > installed in your computer". I have gone to IBM's site, got updated > drivers and then stopped dead in my tracks, there is no floppy drive > on this system. I have no floppy drive on any of the laptops or > desktops I have. > > I am looking for any help I can get here. I have gome through the MS > and IBM site and I am not seeing any other comments like this. Oh and > I have three of these and they all do the same thing. > > Thanks for any help you can send my way, > Tim
Guest Dave Posted September 21, 2007 Posted September 21, 2007 Re: IBM Server won't install You probably need the IBM ServerGuide CD, here is a link to the version needed for the model you specified: http://www-304.ibm.com/jct01004c/systems/support/supportsite.wss/docdisplay?lndocid=MIGR-5072250&brandind=5000008 You boot this CD and follow along to prep the server for install, it will ask for the Windows CD eventually. Hope this helps. DP tring2200 wrote: > Group, > > I have tried everything I can think of. > > I have an IBM x3560 7979 PSG server and I cannot get Windows 2003 or 2000 > server to install on this. They both both start setup, say they are loading > the files, say setup is starting windows, then goes to the welcome to setup > screen. I then have the standard options: ENTER=cotinue, R=Repair, F3=quit > > I hit enter and it tells me "Setup did not find any hard drives installed in > your computer". I have gone to IBM's site, got updated drivers and then > stopped dead in my tracks, there is no floppy drive on this system. I have > no floppy drive on any of the laptops or desktops I have. > > I am looking for any help I can get here. I have gome through the MS and > IBM site and I am not seeing any other comments like this. Oh and I have > three of these and they all do the same thing. > > Thanks for any help you can send my way, > Tim
Guest tring2200 Posted September 21, 2007 Posted September 21, 2007 Re: IBM Server won't install Thanks, I took the link and it is now loading. This is my first IBM server so I was at a loss. Tim "Dave" wrote: > You probably need the IBM ServerGuide CD, here is a link to the version > needed for the model you specified: > > http://www-304.ibm.com/jct01004c/systems/support/supportsite.wss/docdisplay?lndocid=MIGR-5072250&brandind=5000008 > > You boot this CD and follow along to prep the server for install, it > will ask for the Windows CD eventually. > > Hope this helps. > > DP > > tring2200 wrote: > > Group, > > > > I have tried everything I can think of. > > > > I have an IBM x3560 7979 PSG server and I cannot get Windows 2003 or 2000 > > server to install on this. They both both start setup, say they are loading > > the files, say setup is starting windows, then goes to the welcome to setup > > screen. I then have the standard options: ENTER=cotinue, R=Repair, F3=quit > > > > I hit enter and it tells me "Setup did not find any hard drives installed in > > your computer". I have gone to IBM's site, got updated drivers and then > > stopped dead in my tracks, there is no floppy drive on this system. I have > > no floppy drive on any of the laptops or desktops I have. > > > > I am looking for any help I can get here. I have gome through the MS and > > IBM site and I am not seeing any other comments like this. Oh and I have > > three of these and they all do the same thing. > > > > Thanks for any help you can send my way, > > Tim >
Guest Dave Posted September 24, 2007 Posted September 24, 2007 Re: IBM Server won't install No problem at all, please post back if that helps you out. I recently had the same issue where I came into a new company with a couple of IBM eServers and before these, I had never touched an IBM (modern-day) server. Dave tring2200 wrote: > Thanks, I took the link and it is now loading. This is my first IBM server > so I was at a loss. > > Tim > > "Dave" wrote: > >> You probably need the IBM ServerGuide CD, here is a link to the version >> needed for the model you specified: >> >> http://www-304.ibm.com/jct01004c/systems/support/supportsite.wss/docdisplay?lndocid=MIGR-5072250&brandind=5000008 >> >> You boot this CD and follow along to prep the server for install, it >> will ask for the Windows CD eventually. >> >> Hope this helps. >> >> DP >> >> tring2200 wrote: >>> Group, >>> >>> I have tried everything I can think of. >>> >>> I have an IBM x3560 7979 PSG server and I cannot get Windows 2003 or 2000 >>> server to install on this. They both both start setup, say they are loading >>> the files, say setup is starting windows, then goes to the welcome to setup >>> screen. I then have the standard options: ENTER=cotinue, R=Repair, F3=quit >>> >>> I hit enter and it tells me "Setup did not find any hard drives installed in >>> your computer". I have gone to IBM's site, got updated drivers and then >>> stopped dead in my tracks, there is no floppy drive on this system. I have >>> no floppy drive on any of the laptops or desktops I have. >>> >>> I am looking for any help I can get here. I have gome through the MS and >>> IBM site and I am not seeing any other comments like this. Oh and I have >>> three of these and they all do the same thing. >>> >>> Thanks for any help you can send my way, >>> Tim
Recommended Posts