Remote Desktop (2003 Server) stops working, bounces initial connection attempt

[Guest Paul]

When I remote desktop into my Windows 2003 Server from Windows XP Pro, I

enter my username and password into the local remote desktop dialog. The

connection is established to the server. Screen goes black for a second

like it's about to succeed, then bounces back out to the local

username/password dialog. The only cure for this is to reboot the server.

This doesn't happen often but it does seem to happen after a remote desktop

connection over a poor/flaky/slow internet connection, like the server side

remote desktop process gets confused by junk packets and never recovers.

 

Is it possible to just restart "remote desktop service" without rebooting

the whole server? I thought I read somewhere this isn't possible because

"remote desktop" is integrated too deeply into the OS ?

 

-- Paul

[Guest Vera Noest [MVP]]

Re: Remote Desktop (2003 Server) stops working, bounces initial connection attempt

 

That's correct, you can't restart the terminal Services service.

I don't think that that's the problem either, since you can connect

and login.

 

Has this always been a problem with this server? If not, was

something changed directly before the start of the problem?

Which SP is the server running?

Any warnings or errors in the EventLog on the server when this

happens?

Similar problems are sometimes reported with certain video drivers

on the server. Updated yours lately?

_________________________________________________________

Vera Noest

MCSE, CCEA, Microsoft MVP - Terminal Server

TS troubleshooting: http://ts.veranoest.net

___ please respond in newsgroup, NOT by private email ___

 

"Paul" <paule@nospam-mindspring.com> wrote on 25 sep 2007 in

microsoft.public.windows.terminal_services:

> When I remote desktop into my Windows 2003 Server from Windows

> XP Pro, I enter my username and password into the local remote

> desktop dialog. The connection is established to the server.

> Screen goes black for a second like it's about to succeed, then

> bounces back out to the local username/password dialog. The

> only cure for this is to reboot the server. This doesn't happen

> often but it does seem to happen after a remote desktop

> connection over a poor/flaky/slow internet connection, like the

> server side remote desktop process gets confused by junk packets

> and never recovers.

>

> Is it possible to just restart "remote desktop service" without

> rebooting the whole server? I thought I read somewhere this

> isn't possible because "remote desktop" is integrated too deeply

> into the OS ?

>

> -- Paul

[Guest Paul]

Re: Remote Desktop (2003 Server) stops working, bounces initial connection attempt

 

It has always been a problem with this server ( Dell PowerEdge 1600SC )

when it ran Windows 2003 Ent. no SP, SP1, and now SP2. It has been a

problem with the previous version of mstsc.exe client (5.x) as well as the

current version (6.x) This problem is the main reason I installed a Dell

DRAC controller card in the server so I have the ability to reboot it when

the RDP console connection fails.

 

EventLog is mostly loaded with TermServDevices errors relating to missing

printer drivers when the client connects. I can't really see anything in

the log at the specific moment the client attempt to connect and fails.

 

The onboard video is ATI RAGE XL PCI with a driver version 5.10.2600.6014,

and according to Device Manager > Update Driver is the latest version

available.

 

-- Paul

 

 

 

"Vera Noest [MVP]" <vera.noest@remove-this.hem.utfors.se> wrote in message

news:Xns99B6D4B2DC217veranoesthemutforsse@207.46.248.16...

> That's correct, you can't restart the terminal Services service.

> I don't think that that's the problem either, since you can connect

> and login.

>

> Has this always been a problem with this server? If not, was

> something changed directly before the start of the problem?

> Which SP is the server running?

> Any warnings or errors in the EventLog on the server when this

> happens?

> Similar problems are sometimes reported with certain video drivers

> on the server. Updated yours lately?

> _________________________________________________________

> Vera Noest

> MCSE, CCEA, Microsoft MVP - Terminal Server

> TS troubleshooting: http://ts.veranoest.net

> ___ please respond in newsgroup, NOT by private email ___

>

> "Paul" <paule@nospam-mindspring.com> wrote on 25 sep 2007 in

> microsoft.public.windows.terminal_services:

>

>> When I remote desktop into my Windows 2003 Server from Windows

>> XP Pro, I enter my username and password into the local remote

>> desktop dialog. The connection is established to the server.

>> Screen goes black for a second like it's about to succeed, then

>> bounces back out to the local username/password dialog. The

>> only cure for this is to reboot the server. This doesn't happen

>> often but it does seem to happen after a remote desktop

>> connection over a poor/flaky/slow internet connection, like the

>> server side remote desktop process gets confused by junk packets

>> and never recovers.

>>

>> Is it possible to just restart "remote desktop service" without

>> rebooting the whole server? I thought I read somewhere this

>> isn't possible because "remote desktop" is integrated too deeply

>> into the OS ?

>>

>> -- Paul

>

[Guest Vera Noest [MVP]]

Re: Remote Desktop (2003 Server) stops working, bounces initial connection attempt

 

And when this happens, does the server still function normally in

all other respects?

Can you connect to a shared folder on the server?

Can you connect to the server by running TS Manager on another

computer? If you can, are there any sessions present on the server?

If so, in which state?

_________________________________________________________

Vera Noest

MCSE, CCEA, Microsoft MVP - Terminal Server

TS troubleshooting: http://ts.veranoest.net

___ please respond in newsgroup, NOT by private email ___

 

"Paul" <paule@nospam-mindspring.com> wrote on 26 sep 2007 in

microsoft.public.windows.terminal_services:

> It has always been a problem with this server ( Dell PowerEdge

> 1600SC ) when it ran Windows 2003 Ent. no SP, SP1, and now SP2.

> It has been a problem with the previous version of mstsc.exe

> client (5.x) as well as the current version (6.x) This problem

> is the main reason I installed a Dell DRAC controller card in

> the server so I have the ability to reboot it when the RDP

> console connection fails.

>

> EventLog is mostly loaded with TermServDevices errors relating

> to missing printer drivers when the client connects. I can't

> really see anything in the log at the specific moment the client

> attempt to connect and fails.

>

> The onboard video is ATI RAGE XL PCI with a driver version

> 5.10.2600.6014, and according to Device Manager > Update Driver

> is the latest version available.

>

> -- Paul

>

>

>

> "Vera Noest [MVP]" <vera.noest@remove-this.hem.utfors.se> wrote

> in message

> news:Xns99B6D4B2DC217veranoesthemutforsse@207.46.248.16...

>> That's correct, you can't restart the terminal Services

>> service. I don't think that that's the problem either, since

>> you can connect and login.

>>

>> Has this always been a problem with this server? If not, was

>> something changed directly before the start of the problem?

>> Which SP is the server running?

>> Any warnings or errors in the EventLog on the server when this

>> happens?

>> Similar problems are sometimes reported with certain video

>> drivers on the server. Updated yours lately?

>> _________________________________________________________

>> Vera Noest

>> MCSE, CCEA, Microsoft MVP - Terminal Server

>> TS troubleshooting: http://ts.veranoest.net

>> ___ please respond in newsgroup, NOT by private email ___

>>

>> "Paul" <paule@nospam-mindspring.com> wrote on 25 sep 2007 in

>> microsoft.public.windows.terminal_services:

>>

>>> When I remote desktop into my Windows 2003 Server from Windows

>>> XP Pro, I enter my username and password into the local remote

>>> desktop dialog. The connection is established to the server.

>>> Screen goes black for a second like it's about to succeed,

>>> then bounces back out to the local username/password dialog.

>>> The only cure for this is to reboot the server. This doesn't

>>> happen often but it does seem to happen after a remote desktop

>>> connection over a poor/flaky/slow internet connection, like

>>> the server side remote desktop process gets confused by junk

>>> packets and never recovers.

>>>

>>> Is it possible to just restart "remote desktop service"

>>> without rebooting the whole server? I thought I read

>>> somewhere this isn't possible because "remote desktop" is

>>> integrated too deeply into the OS ?

>>>

>>> -- Paul

[Guest Paul]

Re: Remote Desktop (2003 Server) stops working, bounces initial connection attempt

 

I'll note your suggestions for the next time this occurs. It's hard to

reproduce. The server does seem to continue to operate normally in all

other respects (IIS, FTP, mail, etc.) Thanks.

 

-- Paul

 

 

"Vera Noest [MVP]" <vera.noest@remove-this.hem.utfors.se> wrote in message

news:Xns99B7953F57DDveranoesthemutforsse@207.46.248.16...

> And when this happens, does the server still function normally in

> all other respects?

> Can you connect to a shared folder on the server?

> Can you connect to the server by running TS Manager on another

> computer? If you can, are there any sessions present on the server?

> If so, in which state?

> _________________________________________________________

> Vera Noest

> MCSE, CCEA, Microsoft MVP - Terminal Server

> TS troubleshooting: http://ts.veranoest.net

> ___ please respond in newsgroup, NOT by private email ___

>

> "Paul" <paule@nospam-mindspring.com> wrote on 26 sep 2007 in

> microsoft.public.windows.terminal_services:

>

>> It has always been a problem with this server ( Dell PowerEdge

>> 1600SC ) when it ran Windows 2003 Ent. no SP, SP1, and now SP2.

>> It has been a problem with the previous version of mstsc.exe

>> client (5.x) as well as the current version (6.x) This problem

>> is the main reason I installed a Dell DRAC controller card in

>> the server so I have the ability to reboot it when the RDP

>> console connection fails.

>>

>> EventLog is mostly loaded with TermServDevices errors relating

>> to missing printer drivers when the client connects. I can't

>> really see anything in the log at the specific moment the client

>> attempt to connect and fails.

>>

>> The onboard video is ATI RAGE XL PCI with a driver version

>> 5.10.2600.6014, and according to Device Manager > Update Driver

>> is the latest version available.

>>

>> -- Paul

>>

>>

>>

>> "Vera Noest [MVP]" <vera.noest@remove-this.hem.utfors.se> wrote

>> in message

>> news:Xns99B6D4B2DC217veranoesthemutforsse@207.46.248.16...

>>> That's correct, you can't restart the terminal Services

>>> service. I don't think that that's the problem either, since

>>> you can connect and login.

>>>

>>> Has this always been a problem with this server? If not, was

>>> something changed directly before the start of the problem?

>>> Which SP is the server running?

>>> Any warnings or errors in the EventLog on the server when this

>>> happens?

>>> Similar problems are sometimes reported with certain video

>>> drivers on the server. Updated yours lately?

>>> _________________________________________________________

>>> Vera Noest

>>> MCSE, CCEA, Microsoft MVP - Terminal Server

>>> TS troubleshooting: http://ts.veranoest.net

>>> ___ please respond in newsgroup, NOT by private email ___

>>>

>>> "Paul" <paule@nospam-mindspring.com> wrote on 25 sep 2007 in

>>> microsoft.public.windows.terminal_services:

>>>

>>>> When I remote desktop into my Windows 2003 Server from Windows

>>>> XP Pro, I enter my username and password into the local remote

>>>> desktop dialog. The connection is established to the server.

>>>> Screen goes black for a second like it's about to succeed,

>>>> then bounces back out to the local username/password dialog.

>>>> The only cure for this is to reboot the server. This doesn't

>>>> happen often but it does seem to happen after a remote desktop

>>>> connection over a poor/flaky/slow internet connection, like

>>>> the server side remote desktop process gets confused by junk

>>>> packets and never recovers.

>>>>

>>>> Is it possible to just restart "remote desktop service"

>>>> without rebooting the whole server? I thought I read

>>>> somewhere this isn't possible because "remote desktop" is

>>>> integrated too deeply into the OS ?

>>>>

>>>> -- Paul