TS Printing

[Guest Mark R.]

I have an HP 1320 with the PCL 6 driver on a workstation that prints fine

locally. The workstation connects to a 2003 R2 server x64 that has the x64

and x86 drivers. When I connect to the TS server, it will not redirect the

printer. The printer is installed locally via USB on a Win 2K Pro station. I

tried installing the 1320 on the TS server locally on the LPT1 port but it

still didn't work. I was able to use an active TS port with the 1320 as long

as the user with the active port remained logged in. ONce they disconnected,

it didn't work anymore. Any thoughts? Also, I have an HP P2015 that connects

and redirects fine, but when it prints via TS, the printout has black boxes

on it where a logo or text should be. Bad driver?

[Guest pgartner]

Re: TS Printing

 

On Oct 2, 10:52 pm, Mark R. <Ma...@discussions.microsoft.com> wrote:

> I have an HP 1320 with the PCL 6 driver on a workstation that prints fine

> locally. The workstation connects to a 2003 R2 server x64 that has the x64

> and x86 drivers. When I connect to the TS server, it will not redirect the

> printer. The printer is installed locally via USB on a Win 2K Pro station. I

> tried installing the 1320 on the TS server locally on the LPT1 port but it

> still didn't work. I was able to use an active TS port with the 1320 as long

> as the user with the active port remained logged in. ONce they disconnected,

> it didn't work anymore. Any thoughts? Also, I have an HP P2015 that connects

> and redirects fine, but when it prints via TS, the printout has black boxes

> on it where a logo or text should be. Bad driver?

 

try the pcl 5 driver. it appears that the any graphics, or non-black

text gets printed as black boxes.

 

i had the same problem with some lj 1022nw models (networked), the pcl

5 driver fixed that. but now i have problems where it does not print

the right margin properly

 

 

Paul

[Guest Mark R.]

Re: TS Printing

 

I actually have another terminal server on my network that is x32 bit only

and it seemed to run the 1320 and several other of my printers just fine. x64

has been very painful to use with the many HP printers we have.

 

"pgartner" wrote:

> On Oct 2, 10:52 pm, Mark R. <Ma...@discussions.microsoft.com> wrote:

> > I have an HP 1320 with the PCL 6 driver on a workstation that prints fine

> > locally. The workstation connects to a 2003 R2 server x64 that has the x64

> > and x86 drivers. When I connect to the TS server, it will not redirect the

> > printer. The printer is installed locally via USB on a Win 2K Pro station. I

> > tried installing the 1320 on the TS server locally on the LPT1 port but it

> > still didn't work. I was able to use an active TS port with the 1320 as long

> > as the user with the active port remained logged in. ONce they disconnected,

> > it didn't work anymore. Any thoughts? Also, I have an HP P2015 that connects

> > and redirects fine, but when it prints via TS, the printout has black boxes

> > on it where a logo or text should be. Bad driver?

>

> try the pcl 5 driver. it appears that the any graphics, or non-black

> text gets printed as black boxes.

>

> i had the same problem with some lj 1022nw models (networked), the pcl

> 5 driver fixed that. but now i have problems where it does not print

> the right margin properly

>

>

> Paul

>

>