Size of harddrives to Ghost with NT Server 4.0

[Guest wombat52002@yahoo.co.uk]

I have a legacy server with NT 4.0 server. I have ghosted back up

drives around 80 GB IDE/ATA and they have been fine. I recently

bought some 160 GB IDE and they ghost but they will not boot. Should

I stick to buying 40, 60 or 80 GB IDE's to ghost. I can still find

new drives in a box in 40-80 GB range.

 

Is there something in NT Server 4.0 that cannot handle drives over 80

GB? I will be moving to VmWare soon. Thanks.

[Guest John John]

Re: Size of harddrives to Ghost with NT Server 4.0

 

Int-13 and the 7.8GB size limit.

 

 

Windows NT Boot Process

 

On Intel-based computers, the system BIOS controls the initial operating

system boot process. After the initial Power On Self Test (POST) when

hardware components are initialized, the system BIOS identifies the boot

device. Typically, this is a floppy disk or a hard disk. In the case of

the hard disk, the BIOS reads the first physical sector on the disk,

called the Master Boot Sector, and loads an image of it into memory. The

BIOS then transfers execution to that image of the Master Boot Sector.

 

The Master Boot Record contains the partition table and a small amount

of executable code. The executable code examines the partition table and

identifies the active (or bootable) partition. The Master Boot Record

then finds the active partition's starting location on the disk and

loads an image of its first sector, called the Boot Sector, into memory.

The Master Boot Record then transfers execution to that Boot Sector image.

 

Whereas the Master Boot Record is generally operating system

independent, the Boot Sector of the active partition is dependent on

both the operating system and the file system. In the case of Windows NT

and Windows NT Advanced Server, the Boot Sector is responsible for

locating the executable file, NTLDR, which continues the boot process.

The only disk services available to the Boot Sector code at this stage

of system boot up are provided by the BIOS INT 13 interface. The Boot

Sector code must be able to find NTLDR and file system data structures

such as the root directory, the File Allocation Table (FAT) in the case

of an MS-DOS FAT volume or the Master File Table in the case of an NTFS

volume. These must be present within the area of the disk addressable by

the 24-bit side, cylinder, sector structure used by the BIOS INT 13

interface and the partition table. This limits the size of the system

partition to 7.8 gigabytes regardless of which file system is used.

 

[end quote]

 

Windows NT Boot Process and Hard Disk Constraints

http://support.microsoft.com/kb/114841

 

John

 

wombat52002@yahoo.co.uk wrote:

> I have a legacy server with NT 4.0 server. I have ghosted back up

> drives around 80 GB IDE/ATA and they have been fine. I recently

> bought some 160 GB IDE and they ghost but they will not boot. Should

> I stick to buying 40, 60 or 80 GB IDE's to ghost. I can still find

> new drives in a box in 40-80 GB range.

>

> Is there something in NT Server 4.0 that cannot handle drives over 80

> GB? I will be moving to VmWare soon. Thanks.

>

[Guest wombat52002@yahoo.co.uk]

Re: Size of harddrives to Ghost with NT Server 4.0

 

Thanks John John. Any idea how long it takes to mirror about 4 G NTFS

and 15 Gig NTFS on the other partition? It has been running for an

hour but NT Server's mirroring has no progress bar.

 

 

On Oct 15, 11:47 am, John John <audetw...@nbnet.nb.ca> wrote:

> Int-13 and the 7.8GB size limit.

>

>

>

> Windows NT Boot Process

>

> On Intel-based computers, the system BIOS controls the initial operating

> system boot process. After the initial Power On Self Test (POST) when

> hardware components are initialized, the system BIOS identifies the boot

> device. Typically, this is a floppy disk or a hard disk. In the case of

> the hard disk, the BIOS reads the first physical sector on the disk,

> called the Master Boot Sector, and loads an image of it into memory. The

> BIOS then transfers execution to that image of the Master Boot Sector.

>

>

[Guest John John]

Re: Size of harddrives to Ghost with NT Server 4.0

 

I don't know for sure. It depends on the drives and the bus speed.

Figure anything between 2GB to 15GB/hr.

 

John

 

wombat52002@yahoo.co.uk wrote:

> Thanks John John. Any idea how long it takes to mirror about 4 G NTFS

> and 15 Gig NTFS on the other partition? It has been running for an

> hour but NT Server's mirroring has no progress bar.

>

>

> On Oct 15, 11:47 am, John John <audetw...@nbnet.nb.ca> wrote:

>

>>Int-13 and the 7.8GB size limit.

>>

>>

>>

>>Windows NT Boot Process

>>

>>On Intel-based computers, the system BIOS controls the initial operating

>>system boot process. After the initial Power On Self Test (POST) when

>>hardware components are initialized, the system BIOS identifies the boot

>>device. Typically, this is a floppy disk or a hard disk. In the case of

>>the hard disk, the BIOS reads the first physical sector on the disk,

>>called the Master Boot Sector, and loads an image of it into memory. The

>>BIOS then transfers execution to that image of the Master Boot Sector.

>>

>>

>

>

[Guest Calvin]

Re: Size of harddrives to Ghost with NT Server 4.0

 

Hi,

 

Have a look at http://nt4ref.zcm.com.au/bigdisk.htm for an explanation

of how NT4 copes with large HDDs.

 

Attempting to use a drive of over 137GB in size (the LBA28 limit) will

cause you problems without suitable driver support.

 

There are other limitations relating to how NT4 boots that restrict

drive partition layout as well - check the web page above.

 

All the best,

 

Calvin.

[Guest wombat52002@yahoo.co.uk]

Re: Size of harddrives to Ghost with NT Server 4.0

 

On Oct 15, 10:13 pm, Calvin <nos...@spamcop.net> wrote:

> Hi,

>

> Have a look athttp://nt4ref.zcm.com.au/bigdisk.htmfor an explanation

> of how NT4 copes with large HDDs.

>

> Attempting to use a drive of over 137GB in size (the LBA28 limit) will

> cause you problems without suitable driver support.

>

> There are other limitations relating to how NT4 boots that restrict

> drive partition layout as well - check the web page above.

>

> All the best,

>

> Calvin.

 

Thanks Calvin. Yes the 160 GB will not boot but 80 GB's seem to work

fine. Thanks again, I appreciate it.