Guest NRC Help Posted October 16, 2007 Posted October 16, 2007 Hello all, We have an Windows 2003 SP2, Exchange 2003 SP2 server which had a drive fail (Dell PowerEdge 2650, 5 drives all in a single RAID 5 container). The drive was replaced, virtual disk auto-regenerated, and Dell OpenManage says everything is OK. However, we are seeing the error messages below in the event logs about once per day (they began before the drive was actually swapped out) I assume my only option here is to run chkdsk? If so, which options do you recommend? I know the system will need to be rebooted for any corrections to be made by chkdsk, so this will need to occur after hours, and I would like to minimize down time while at the same time do what is right to prevent future outages. Source: Ntfs Category: (2) Event ID: 55 "The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume \Device\VSPSnapshot0." And.. "The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume \Device\HarddiskVolumeShadowCopy8." Thank you for the help. Jim Willson
Guest Sean Cai [MSFT] Posted October 17, 2007 Posted October 17, 2007 RE: File System Structure Corrupt? Hello Jim, I'm Sean from Microsoft CIBS OS & APP team and I'll helping you on this issue. Regarding your description of the problem: you have ntfs event 55. If I have misunderstood, please let me know. I suggest you to run chkdsk without any switch first. When chkdsk run without /F parameter, it's working in a "read-only" mode which will check disk only and doesn't try to fix them. I believe you will have a general idea about the problem. If you want to fix the problem, just reboot server. Since the dirty bit was set when the event 55 was posted. The volume name "\Device\HarddiskVolumeShadowCopy8" means it's a shadow copy. You can assign a driver letter with a mps report tool dosv.exe. Here are the articles you can refer to: A bit of black magic: How to assign drive letters to VSS shadow copies... on Windows XP ! http://blogs.msdn.com/adioltean/archive/2006/09/18/761515.aspx DOSDEV.EXE - a misterious tool http://blogs.msdn.com/adioltean/archive/2005/10/04/477164.aspx And here is the MPS Report tools download link. Dosdev is a tool of cluster mps report tool: Microsoft Product Support's Reporting Tools http://www.microsoft.com/downloads/details.aspx?FamilyID=cebf3c7c-7ca5-408f- 88b7-f9c79b7306c0&DisplayLang=en I don't know what's \Device\VSPSnapshot0, but I think it's safe to check it with dosdev. I hope the information above can address your concerns. If anything is unclear, please feel free to let us know. Sean Cai, MCSE2000 Microsoft Online Partner Support Get Secure! - http://www.microsoft.com/security ===================================================== When responding to posts, please "Reply to Group" via your newsreader so that others may learn and benefit from your issue. ===================================================== This posting is provided "AS IS" with no warranties, and confers no rights.
Guest NRC Help Posted October 17, 2007 Posted October 17, 2007 RE: File System Structure Corrupt? Hello Sean, Thanks for the links to the tools, I will check them out. Is there any way to tell which drive letter, C or D, the volume shadow copys are on?. Basically I need to know if I'm looking at running chkdsk on the C, D, or both drives. Oddly enough, I just checked and I do not have Shadow Copies enabled on the C or D drive on this server, which are the only hard drives. So why am I seeing regarding shadow copies if I have it disabled? Is this an Exchange 2003 function? I am also getting the following BackupExec errors when trying to back up this server: "Backup- \\MERCURY\C: Directory WINDOWS\system32\inetsrv\ was not found, or could not be accessed. None of the files or subdirectories contained within will be backed up." "Backup- \\MERCURY\System?State \\MERCURY\System?StateV-79-57344-65245 - A failure occurred accessing the object list." The inetsrv is obviously the C drive and I am assuming the System State is also on the C drive, at least by default? Again, since this is our one and only mail server I do not wan to take it down unless I have to. I will run chkdsk without switches first, but it would be good to know if just one or both of the drives need to be repaired. The Exchange information store etc. is stored on the Drive by the way. Thanks, Jim Willson "Sean Cai [MSFT]" wrote: > Hello Jim, > > I'm Sean from Microsoft CIBS OS & APP team and I'll helping you on this > issue. Regarding your description of the problem: you have ntfs event 55. > If I have misunderstood, please let me know. > > I suggest you to run chkdsk without any switch first. When chkdsk run > without /F parameter, it's working in a "read-only" mode which will check > disk only and doesn't try to fix them. I believe you will have a general > idea about the problem. If you want to fix the problem, just reboot server. > Since the dirty bit was set when the event 55 was posted. > > The volume name "\Device\HarddiskVolumeShadowCopy8" means it's a shadow > copy. You can assign a driver letter with a mps report tool dosv.exe. Here > are the articles you can refer to: > A bit of black magic: How to assign drive letters to VSS shadow copies... > on Windows XP ! > http://blogs.msdn.com/adioltean/archive/2006/09/18/761515.aspx > DOSDEV.EXE - a misterious tool > http://blogs.msdn.com/adioltean/archive/2005/10/04/477164.aspx > > And here is the MPS Report tools download link. Dosdev is a tool of cluster > mps report tool: > Microsoft Product Support's Reporting Tools > http://www.microsoft.com/downloads/details.aspx?FamilyID=cebf3c7c-7ca5-408f- > 88b7-f9c79b7306c0&DisplayLang=en > > I don't know what's \Device\VSPSnapshot0, but I think it's safe to check it > with dosdev. > > I hope the information above can address your concerns. If anything is > unclear, please feel free to let us know. > > Sean Cai, MCSE2000 > Microsoft Online Partner Support > > Get Secure! - http://www.microsoft.com/security > ===================================================== > When responding to posts, please "Reply to Group" via your newsreader so > that others may learn and benefit from your issue. > ===================================================== > This posting is provided "AS IS" with no warranties, and confers no rights. > >
Guest Sean Cai [MSFT] Posted October 18, 2007 Posted October 18, 2007 RE: File System Structure Corrupt? Hello Jim, Shadow copy is widely used by backup software, not only in system. Please refer to the following article for the information about how to query VSS information: Vssadmin http://technet2.microsoft.com/windowsserver/en/library/89d2e411-6977-4808-9a d5-476c9eaecaa51033.mspx?mfr=true I suggest you try use NTbackup to backup a few folders. This should trigger more VSS error and would help us diagnose the problem. I hope the information above can address your concerns. If anything is unclear, please feel free to let us know. Sean Cai, MCSE2000 Microsoft Online Partner Support Get Secure! - http://www.microsoft.com/security ===================================================== When responding to posts, please "Reply to Group" via your newsreader so that others may learn and benefit from your issue. ===================================================== This posting is provided "AS IS" with no warranties, and confers no rights.
Guest Sean Cai [MSFT] Posted October 23, 2007 Posted October 23, 2007 RE: File System Structure Corrupt? Hello , How is everything going? Please keep us posted on your progress and let us know if you have any additional questions or concerns. Best Regards, Sean Cai, MCSE2000 Microsoft Online Partner Support Get Secure! - http://www.microsoft.com/security ===================================================== When responding to posts, please "Reply to Group" via your newsreader so that others may learn and benefit from your issue. ===================================================== This posting is provided "AS IS" with no warranties, and confers no rights.
Guest NRC Help Posted October 23, 2007 Posted October 23, 2007 RE: File System Structure Corrupt? Hello Sean, Well I ran chkdsk on the volume and it found 9 orphaned files and corrected the issue. The backups are now running without error, and there are no errors in the event log. It looks like the problem has been resolved. Thanks for the help. Jim Willson "Sean Cai [MSFT]" wrote: > Hello , > > How is everything going? Please keep us posted on your progress and let us > know if you have any additional questions or concerns. > > Best Regards, > > Sean Cai, MCSE2000 > Microsoft Online Partner Support > > Get Secure! - http://www.microsoft.com/security > ===================================================== > When responding to posts, please "Reply to Group" via your newsreader so > that others may learn and benefit from your issue. > ===================================================== > This posting is provided "AS IS" with no warranties, and confers no rights. > >
Guest Sean Cai [MSFT] Posted October 25, 2007 Posted October 25, 2007 RE: File System Structure Corrupt? Hello , Great! It's glad to know the problem is fixed. If you need anything else, please let me know. I'll be glad to be of help. Best Regards, Sean Cai, MCSE2000 Microsoft Online Partner Support Get Secure! - http://www.microsoft.com/security ===================================================== When responding to posts, please "Reply to Group" via your newsreader so that others may learn and benefit from your issue. ===================================================== This posting is provided "AS IS" with no warranties, and confers no rights.
Recommended Posts