Guest abckid Posted October 24, 2007 Posted October 24, 2007 Hi, I have installed a new Win2K3 - R2 Server as member server of the domain; with roles of File Server and Print Server. We have folder share for users on the server and all users are mapped to this share. Folders have rights as per different groups and users. The problem is that sometimes the response for users accessing the files on the server is very slow. Its fine normally, but suddendly the access to any file or while saving it hangs for sometime and gets back normal. There are no sort of errors in the event viewer or any sort of performance issue. I have enabled the File screening option to block audio, video and installer files as per built-in templates in the R2 for this share. Before i applied these blocks, i had transfered some installer and music files to this share during moving files from old to new R2 server. Also i have enabled quota for few of the folders within this share. The server has 2 gig NIC. I have enabled Team Settings as - Team Type Selection: Transmit Load Balancing with Fault Tolerance (TLB) Transmit Load Balancing Method: Automatic (Recommended) Speed/Duplex Setting: Auto/Auto No VLAN settings Only one interface is Sending/Receiving. Other is only Sending some packets. The network utilizaion is normal, with peak going to just 5% Both NIC are connected to gig ports on the switch I am out of ideas, what can be the possible problem or startwith ? Please guide. Thanks, abckid.
Recommended Posts