Water cooling help.

[pcwontwork]

Hi again guys! Thanks to your speedy recovery with the BIOS issue the other day, I've decided to rack your extensive brains a little more.

 

I bought an Alphacool Cool AnswerIII 120 Compact 12V. On Friday of last week, It was all working perfectly up until Monday (26th).

 

Now, i had to take the whole thing apart to fit it into my case, e.g, Taking the radiator off, fan, and water tank so I could relocate some parts, I fitted the Rad and fan on the back of the case, witht he pipes running through the special little blanking plate supplied, Then I screwed the little chipboard with the speed controller fan, twin power supply (PSU and typical electrical supply - Little round one with a hole in it).

 

Now, as I said it was all working fine, but then on Monday it stopped. No reason what so ever why, the p.c is running fine, everything else works, I just can't jump start the pump back into action, i've got no equipment to test if there is an electric current to the pump, via the chipboard, and I also don't have a typical electrical electrical supply for it either.

 

One more point, I can definately say not one bit of water touched any component, i'm very picky about what I put into my p.c!

 

Thanks in advance!

[Dalo Harkin]

Sorry - I only just saw this thread.

 

Did you run the water through the setup before you installed it in the PC?

Double check all the connections ON EVERYTHING linked to the cooler

[pcwontwork]

Sorry - I only just saw this thread.

 

Did you run the water through the setup before you installed it in the PC?

Double check all the connections ON EVERYTHING linked to the cooler

 

Yeah, I did everything the instructions said, just to make sure!

 

I've contacted scan, and there going to replace it with a new one under their warranty terms.

 

Just means putting it all back together! :@