Guest Tooter102 Posted November 11, 2007 Posted November 11, 2007 My husband has an old Dell 200Mhz machine that originally came with Win95. Upgraded recently to Win98SE, hoping to get the two factory 1.1 USB ports to work. They still don't. Under Add New Hardware, I was supposedly successful in adding a "USB Composite Device" and a "USB Root Hub". But after doing that, they still did not appear under Device Manager. Any ideas what else I can do?
Guest glee Posted November 11, 2007 Posted November 11, 2007 Re: USB ports don't work on Win98SE Are the USB ports connected to a motherboard header, or are they add-in cards? Do you have the USB ports enabled in the BIOS setup? -- Glen Ventura, MS MVP Shell/User, A+ http://dts-l.org/ "Tooter102" <biltie@gmail.com> wrote in message news:1194805870.782268.226770@k35g2000prh.googlegroups.com... > My husband has an old Dell 200Mhz machine that originally came with > Win95. Upgraded recently to Win98SE, hoping to get the two factory > 1.1 USB ports to work. They still don't. Under Add New Hardware, I > was supposedly successful in adding a "USB Composite Device" and a > "USB Root Hub". But after doing that, they still did not appear under > Device Manager. Any ideas what else I can do? >
Guest Tooter102 Posted November 12, 2007 Posted November 12, 2007 Re: USB ports don't work on Win98SE On Nov 11, 11:01 am, "glee" <gle...@spamindspring.com> wrote: > Are the USB ports connected to a motherboard header, or are they add-in cards? > > Do you have the USB ports enabled in the BIOS setup? > -- > Glen Ventura, MS MVP Shell/User, A+http://dts-l.org/ > > "Tooter102" <bil...@gmail.com> wrote in message > > news:1194805870.782268.226770@k35g2000prh.googlegroups.com... > > > My husband has an old Dell 200Mhz machine that originally came with > > Win95. Upgraded recently to Win98SE, hoping to get the two factory > > 1.1 USB ports to work. They still don't. Under Add New Hardware, I > > was supposedly successful in adding a "USB Composite Device" and a > > "USB Root Hub". But after doing that, they still did not appear under > > Device Manager. Any ideas what else I can do? - - - - - Thanks, we're now on the right track. No, USB was turned off in BIOS so turned them on. After another reboot, got message "Found new Hardware - USB 2.0 FD". My jump drive is USB 2.0 but assume that doesn't matter. Then the Found new Hardware wizard showed up and I tried installing the same USB items found in Device Manager as on my newer Dell but it didn't like anything I selected. Nevertheless, Device manager now shows 3 items under "USB Hub": Generic USB Hub; USB Root Hub; and Intel 82371 SB PCI+USB Universal Host Controller. However, the jump drive is still not appearing in Windows Explorer. I assume these 2 USB ports are part of the motherboard as didn't add on anything. They are located directly beneath the mouse and keyboard ports. Next idea? (so far, so good). Kay
Guest glee Posted November 12, 2007 Posted November 12, 2007 Re: USB ports don't work on Win98SE "Tooter102" <biltie@gmail.com> wrote in message news:1194833170.086912.17660@i13g2000prf.googlegroups.com... > On Nov 11, 11:01 am, "glee" <gle...@spamindspring.com> wrote >> >> "Tooter102" <bil...@gmail.com> wrote in message >> >> news:1194805870.782268.226770@k35g2000prh.googlegroups.com... >> >> > My husband has an old Dell 200Mhz machine that originally came with >> > Win95. Upgraded recently to Win98SE, hoping to get the two factory >> > 1.1 USB ports to work. They still don't. Under Add New Hardware, I >> > was supposedly successful in adding a "USB Composite Device" and a >> > "USB Root Hub". But after doing that, they still did not appear under >> > Device Manager. Any ideas what else I can do? > > >> Are the USB ports connected to a motherboard header, or are they add-in cards? >> >> Do you have the USB ports enabled in the BIOS setup? > > - - - - - > Thanks, we're now on the right track. No, USB was turned off in BIOS > so turned them on. After another reboot, got message "Found new > Hardware - USB 2.0 FD". My jump drive is USB 2.0 but assume that > doesn't matter. Then the Found new Hardware wizard showed up and I > tried installing the same USB items found in Device Manager as on my > newer Dell but it didn't like anything I selected. Nevertheless, > Device manager now shows 3 items under "USB Hub": Generic USB Hub; > USB Root Hub; and Intel 82371 SB PCI+USB Universal Host Controller. > > However, the jump drive is still not appearing in Windows Explorer. I > assume these 2 USB ports are part of the motherboard as didn't add on > anything. They are located directly beneath the mouse and keyboard > ports. > > Next idea? (so far, so good). Kay OK, now you've added new info that was not in your original post....that you are connecting a USB flash or "jump" drive. They need a Win98SE driver installed to be detected. Did your drive come with a 98SE driver on diskette, or did you find and download one from their website? What is the brand and model of the jump drive? "Found new Hardware - USB 2.0 FD" sounds like you have a USB-powered Floppy Drive attached to the computer...do you? You indicate that you had manually added a "USB Composite Device" and a "USB Root Hub" via Add New Hardware, but I assume you forced the installation since they were not being detected by Windows. Now Windows has detected the correct devices since your manually added devices were not correct. So, now you need to remove ALL of them from Device Manager and let Windows re-detect just the correct ones. Be sure the USB device (flash/jump drive) is NOT connected to the computer's USB port. The best way to do this is from Safe Mode: - Start the computer and hold down the CTRL key till the Windows 98 Startup menu (boot menu) appears. OR - Repeatedly tap the F8 key after the memory count to bring up the boot menu. - Use the arrow keys to select "Safe Mode" and press Enter. Once in Safe Mode, open Device Manager and remove all the items listed that you added and all the items that Windows detected after you enabled USB in the BIOS. IOW, remove all the USB entries altogether. Also, if there is an "Other" category in Device Manager in Safe Mode, remove everything in that category. Click OK, then restart the computer in normal mode (Start> Shutdown> Restart), and let Windows detect the USB hubs and so forth with no interference from you. At that point, you can install the Win98SE driver for the flash drive if you have it. If you don't, you need to go to their support pages and download/install their 98SE driver for that model device. If they don't provide a driver for Win98SE, let me know and I will direct you to a download for a "generic" driver. -- Glen Ventura, MS MVP Shell/User, A+ http://dts-l.org/
Guest Tooter102 Posted November 12, 2007 Posted November 12, 2007 Re: USB ports don't work on Win98SE On Nov 11, 9:54 pm, "glee" <gle...@spamindspring.com> wrote: > "Tooter102" <bil...@gmail.com> wrote in message > > news:1194833170.086912.17660@i13g2000prf.googlegroups.com... > > > > > On Nov 11, 11:01 am, "glee" <gle...@spamindspring.com> wrote > > >> "Tooter102" <bil...@gmail.com> wrote in message > > >>news:1194805870.782268.226770@k35g2000prh.googlegroups.com... > > >> > My husband has an old Dell 200Mhz machine that originally came with > >> > Win95. Upgraded recently to Win98SE, hoping to get the two factory > >> > 1.1 USB ports to work. They still don't. Under Add New Hardware, I > >> > was supposedly successful in adding a "USB Composite Device" and a > >> > "USB Root Hub". But after doing that, they still did not appear under > >> > Device Manager. Any ideas what else I can do? > > >> Are the USB ports connected to a motherboard header, or are they add-in cards? > > >> Do you have the USB ports enabled in the BIOS setup? > > > - - - - - > > Thanks, we're now on the right track. No, USB was turned off in BIOS > > so turned them on. After another reboot, got message "Found new > > Hardware - USB 2.0 FD". My jump drive is USB 2.0 but assume that > > doesn't matter. Then the Found new Hardware wizard showed up and I > > tried installing the same USB items found in Device Manager as on my > > newer Dell but it didn't like anything I selected. Nevertheless, > > Device manager now shows 3 items under "USB Hub": Generic USB Hub; > > USB Root Hub; and Intel 82371 SB PCI+USB Universal Host Controller. > > > However, the jump drive is still not appearing in Windows Explorer. I > > assume these 2 USB ports are part of the motherboard as didn't add on > > anything. They are located directly beneath the mouse and keyboard > > ports. > > > Next idea? (so far, so good). Kay > > OK, now you've added new info that was not in your original post....that you are > connecting a USB flash or "jump" drive. They need a Win98SE driver installed to be > detected. > Did your drive come with a 98SE driver on diskette, or did you find and download one > from their website? > What is the brand and model of the jump drive? > > "Found new Hardware - USB 2.0 FD" sounds like you have a USB-powered Floppy Drive > attached to the computer...do you? > > You indicate that you had manually added a "USB Composite Device" and a "USB Root > Hub" via Add New Hardware, but I assume you forced the installation since they were > not being detected by Windows. Now Windows has detected the correct devices since > your manually added devices were not correct. So, now you need to remove ALL of > them from Device Manager and let Windows re-detect just the correct ones. Be sure > the USB device (flash/jump drive) is NOT connected to the computer's USB port. > > The best way to do this is from Safe Mode: > - Start the computer and hold down the CTRL key till the Windows 98 Startup menu > (boot menu) appears. > OR > - Repeatedly tap the F8 key after the memory count to bring up the boot menu. > - Use the arrow keys to select "Safe Mode" and press Enter. > > Once in Safe Mode, open Device Manager and remove all the items listed that you > added and all the items that Windows detected after you enabled USB in the BIOS. > IOW, remove all the USB entries altogether. Also, if there is an "Other" category > in Device Manager in Safe Mode, remove everything in that category. > Click OK, then restart the computer in normal mode (Start> Shutdown> Restart), and > let Windows detect the USB hubs and so forth with no interference from you. > > At that point, you can install the Win98SE driver for the flash drive if you have > it. If you don't, you need to go to their support pages and download/install their > 98SE driver for that model device. > If they don't provide a driver for Win98SE, let me know and I will direct you to a > download for a "generic" driver. > -- > Glen Ventura, MS MVP Shell/User, A+http://dts-l.org/ SUCCESS! No, no USB-powered floppy drive. The PNY 2.0 USB drivers I downloaded just weren't working. So decided to try my old 128MB Lexar 1.1 jump drive (as that's really all I need) and found a driver and it installed like a whiz. Maybe it just didn't like 2.0 when the ports are only 1.1. Who knows, but without your help, couldn't have done it so thanks again. Kay
Guest Franc Zabkar Posted November 12, 2007 Posted November 12, 2007 Re: USB ports don't work on Win98SE On Mon, 12 Nov 2007 00:54:44 -0500, "glee" <glee29@spamindspring.com> put finger to keyboard and composed: >"Found new Hardware - USB 2.0 FD" sounds like you have a USB-powered Floppy Drive >attached to the computer...do you? Maybe FD = Flash Drive or Flash Disk ??? - Franc Zabkar -- Please remove one 'i' from my address when replying by email.
Guest glee Posted November 12, 2007 Posted November 12, 2007 Re: USB ports don't work on Win98SE "Franc Zabkar" <fzabkar@iinternode.on.net> wrote in message news:q4hhj3pc3ghvtorib7jderj7upse3gk6j8@4ax.com... > On Mon, 12 Nov 2007 00:54:44 -0500, "glee" <glee29@spamindspring.com> > put finger to keyboard and composed: > >>"Found new Hardware - USB 2.0 FD" sounds like you have a USB-powered Floppy Drive >>attached to the computer...do you? > > Maybe FD = Flash Drive or Flash Disk ??? Duh! <smacks head> That's probably it, Franc. -- Glen Ventura, MS MVP Shell/User, A+
Guest glee Posted November 13, 2007 Posted November 13, 2007 Re: USB ports don't work on Win98SE "Tooter102" <biltie@gmail.com> wrote in message news:1194898832.370606.71060@s15g2000prm.googlegroups.com... > On Nov 11, 9:54 pm, "glee" <gle...@spamindspring.com> wrote: >> "Tooter102" <bil...@gmail.com> wrote in message >> >> news:1194833170.086912.17660@i13g2000prf.googlegroups.com... >> >> >> >> > On Nov 11, 11:01 am, "glee" <gle...@spamindspring.com> wrote >> >> >> "Tooter102" <bil...@gmail.com> wrote in message >> >> >>news:1194805870.782268.226770@k35g2000prh.googlegroups.com... >> >> >> > My husband has an old Dell 200Mhz machine that originally came with >> >> > Win95. Upgraded recently to Win98SE, hoping to get the two factory >> >> > 1.1 USB ports to work. They still don't. Under Add New Hardware, I >> >> > was supposedly successful in adding a "USB Composite Device" and a >> >> > "USB Root Hub". But after doing that, they still did not appear under >> >> > Device Manager. Any ideas what else I can do? >> >> >> Are the USB ports connected to a motherboard header, or are they add-in cards? >> >> >> Do you have the USB ports enabled in the BIOS setup? >> >> > - - - - - >> > Thanks, we're now on the right track. No, USB was turned off in BIOS >> > so turned them on. After another reboot, got message "Found new >> > Hardware - USB 2.0 FD". My jump drive is USB 2.0 but assume that >> > doesn't matter. Then the Found new Hardware wizard showed up and I >> > tried installing the same USB items found in Device Manager as on my >> > newer Dell but it didn't like anything I selected. Nevertheless, >> > Device manager now shows 3 items under "USB Hub": Generic USB Hub; >> > USB Root Hub; and Intel 82371 SB PCI+USB Universal Host Controller. >> >> > However, the jump drive is still not appearing in Windows Explorer. I >> > assume these 2 USB ports are part of the motherboard as didn't add on >> > anything. They are located directly beneath the mouse and keyboard >> > ports. >> >> > Next idea? (so far, so good). Kay >> >> OK, now you've added new info that was not in your original post....that you are >> connecting a USB flash or "jump" drive. They need a Win98SE driver installed to >> be >> detected. >> Did your drive come with a 98SE driver on diskette, or did you find and download >> one >> from their website? >> What is the brand and model of the jump drive? >> >> "Found new Hardware - USB 2.0 FD" sounds like you have a USB-powered Floppy Drive >> attached to the computer...do you? >> >> You indicate that you had manually added a "USB Composite Device" and a "USB Root >> Hub" via Add New Hardware, but I assume you forced the installation since they >> were >> not being detected by Windows. Now Windows has detected the correct devices >> since >> your manually added devices were not correct. So, now you need to remove ALL of >> them from Device Manager and let Windows re-detect just the correct ones. Be >> sure >> the USB device (flash/jump drive) is NOT connected to the computer's USB port. >> >> The best way to do this is from Safe Mode: >> - Start the computer and hold down the CTRL key till the Windows 98 Startup menu >> (boot menu) appears. >> OR >> - Repeatedly tap the F8 key after the memory count to bring up the boot menu. >> - Use the arrow keys to select "Safe Mode" and press Enter. >> >> Once in Safe Mode, open Device Manager and remove all the items listed that you >> added and all the items that Windows detected after you enabled USB in the BIOS. >> IOW, remove all the USB entries altogether. Also, if there is an "Other" >> category >> in Device Manager in Safe Mode, remove everything in that category. >> Click OK, then restart the computer in normal mode (Start> Shutdown> Restart), >> and >> let Windows detect the USB hubs and so forth with no interference from you. >> >> At that point, you can install the Win98SE driver for the flash drive if you have >> it. If you don't, you need to go to their support pages and download/install >> their >> 98SE driver for that model device. >> If they don't provide a driver for Win98SE, let me know and I will direct you to >> a >> download for a "generic" driver. > > SUCCESS! No, no USB-powered floppy drive. The PNY 2.0 USB drivers I > downloaded just weren't working. So decided to try my old 128MB Lexar > 1.1 jump drive (as that's really all I need) and found a driver and it > installed like a whiz. Maybe it just didn't like 2.0 when the ports > are only 1.1. Who knows, but without your help, couldn't have done it > so thanks again. Kay USB 2.0 devices like your PNY flash drive are *supposed* to be backward-compatible with USB 1.1 ports. The drivers were probably just not working on your system for some reason. One of my flash drives is a Memorex and I could never get the downloaded 98SE drivers to install correctly either at work or at home, despite the fact that others reported not having a problem with them on their systems. I installed a generic USB driver after uninstalling all my other flash drive drivers, and now all the flash drives I use are recognised right away, using that one driver. Native USB Mass Storage Driver for Win98SE: http://www.technical-assistance.co.uk/kb/win98se-usb-mass-storage-drivers.php On your older system you would do best with the 2.x version of the driver (the installation of which is described in the middle of the page), the newest in English being version 2.4: http://www.technical-assistance.co.uk/drivers/nusb24e.exe Something to consider if you ever need to use that PNY flash drive with this older system. Glad you got the ports working! -- Glen Ventura, MS MVP Shell/User, A+
Guest MEB Posted November 13, 2007 Posted November 13, 2007 Re: USB ports don't work on Win98SE http://www.msfn.org/board/Maximum_Decim_Native_USB_Drivers_t43605.html Maximus Decim Native USB ver.3.2 ------------------------------------------------------------------------ *Native (without installation of additional drivers for each type) support USB flash drives, digital photo and videocameras and other similar devices. *Universal Stack USB 2.0 (without installation of additional drivers for each chipsets) with uninstall. 1.Remove ALL drivers USB flash drives. 2.Remove ALL drivers USB 2.0 controllers. 3.Remove ALL unknown devices. 4.Install NUSB 3.2 and reboot. 5.After detection new USB 2.0 controllers (if it will occur) too it is necessary to be reboot. Remember! You install it at own risk! ---------------------------------------------------------------------------- ------------------------------------------- English: http://rapidshare.com/files/66648662/nusb32e.exe.html Russian: http://rapidshare.com/files/66648597/nusb32r.exe.html What's new? *Add USB FDD + DISKTSD.VXD 4.90.3001 *Fix USB2.IFX for ATI chipsets *explorer.exe ver 4.72.3612.1700 Maximus Decim Native USB ver.3.1 ------------------------------------------------------------------------ English: http://rapidshare.com/files/19858514/nusb31e.exe.html Russian: http://rapidshare.com/files/19858375/nusb31r.exe.html What's new? *Downgrade USBSTOR.SYS (4.90.3000.1), removed wdmstub.sys *CnMemore replaced Skymedi This post has been edited by maximus-decim: Nov 1 2007, 01:18 AM -- MEB http://peoplescounsel.orgfree.com ________ "glee" <glee29@spamindspring.com> wrote in message news:OsLKnvYJIHA.3516@TK2MSFTNGP02.phx.gbl... | "Tooter102" <biltie@gmail.com> wrote in message | news:1194898832.370606.71060@s15g2000prm.googlegroups.com... | > On Nov 11, 9:54 pm, "glee" <gle...@spamindspring.com> wrote: | >> "Tooter102" <bil...@gmail.com> wrote in message | >> | >> news:1194833170.086912.17660@i13g2000prf.googlegroups.com... | >> | >> | >> | >> > On Nov 11, 11:01 am, "glee" <gle...@spamindspring.com> wrote | >> | >> >> "Tooter102" <bil...@gmail.com> wrote in message | >> | >> >>news:1194805870.782268.226770@k35g2000prh.googlegroups.com... | >> | >> >> > My husband has an old Dell 200Mhz machine that originally came with | >> >> > Win95. Upgraded recently to Win98SE, hoping to get the two factory | >> >> > 1.1 USB ports to work. They still don't. Under Add New Hardware, I | >> >> > was supposedly successful in adding a "USB Composite Device" and a | >> >> > "USB Root Hub". But after doing that, they still did not appear under | >> >> > Device Manager. Any ideas what else I can do? | >> | >> >> Are the USB ports connected to a motherboard header, or are they add-in cards? | >> | >> >> Do you have the USB ports enabled in the BIOS setup? | >> | >> > - - - - - | >> > Thanks, we're now on the right track. No, USB was turned off in BIOS | >> > so turned them on. After another reboot, got message "Found new | >> > Hardware - USB 2.0 FD". My jump drive is USB 2.0 but assume that | >> > doesn't matter. Then the Found new Hardware wizard showed up and I | >> > tried installing the same USB items found in Device Manager as on my | >> > newer Dell but it didn't like anything I selected. Nevertheless, | >> > Device manager now shows 3 items under "USB Hub": Generic USB Hub; | >> > USB Root Hub; and Intel 82371 SB PCI+USB Universal Host Controller. | >> | >> > However, the jump drive is still not appearing in Windows Explorer. I | >> > assume these 2 USB ports are part of the motherboard as didn't add on | >> > anything. They are located directly beneath the mouse and keyboard | >> > ports. | >> | >> > Next idea? (so far, so good). Kay | >> | >> OK, now you've added new info that was not in your original post....that you are | >> connecting a USB flash or "jump" drive. They need a Win98SE driver installed to | >> be | >> detected. | >> Did your drive come with a 98SE driver on diskette, or did you find and download | >> one | >> from their website? | >> What is the brand and model of the jump drive? | >> | >> "Found new Hardware - USB 2.0 FD" sounds like you have a USB-powered Floppy Drive | >> attached to the computer...do you? | >> | >> You indicate that you had manually added a "USB Composite Device" and a "USB Root | >> Hub" via Add New Hardware, but I assume you forced the installation since they | >> were | >> not being detected by Windows. Now Windows has detected the correct devices | >> since | >> your manually added devices were not correct. So, now you need to remove ALL of | >> them from Device Manager and let Windows re-detect just the correct ones. Be | >> sure | >> the USB device (flash/jump drive) is NOT connected to the computer's USB port. | >> | >> The best way to do this is from Safe Mode: | >> - Start the computer and hold down the CTRL key till the Windows 98 Startup menu | >> (boot menu) appears. | >> OR | >> - Repeatedly tap the F8 key after the memory count to bring up the boot menu. | >> - Use the arrow keys to select "Safe Mode" and press Enter. | >> | >> Once in Safe Mode, open Device Manager and remove all the items listed that you | >> added and all the items that Windows detected after you enabled USB in the BIOS. | >> IOW, remove all the USB entries altogether. Also, if there is an "Other" | >> category | >> in Device Manager in Safe Mode, remove everything in that category. | >> Click OK, then restart the computer in normal mode (Start> Shutdown> Restart), | >> and | >> let Windows detect the USB hubs and so forth with no interference from you. | >> | >> At that point, you can install the Win98SE driver for the flash drive if you have | >> it. If you don't, you need to go to their support pages and download/install | >> their | >> 98SE driver for that model device. | >> If they don't provide a driver for Win98SE, let me know and I will direct you to | >> a | >> download for a "generic" driver. | > | > SUCCESS! No, no USB-powered floppy drive. The PNY 2.0 USB drivers I | > downloaded just weren't working. So decided to try my old 128MB Lexar | > 1.1 jump drive (as that's really all I need) and found a driver and it | > installed like a whiz. Maybe it just didn't like 2.0 when the ports | > are only 1.1. Who knows, but without your help, couldn't have done it | > so thanks again. Kay | | USB 2.0 devices like your PNY flash drive are *supposed* to be backward-compatible | with USB 1.1 ports. The drivers were probably just not working on your system for | some reason. One of my flash drives is a Memorex and I could never get the | downloaded 98SE drivers to install correctly either at work or at home, despite the | fact that others reported not having a problem with them on their systems. I | installed a generic USB driver after uninstalling all my other flash drive drivers, | and now all the flash drives I use are recognised right away, using that one driver. | | Native USB Mass Storage Driver for Win98SE: | http://www.technical-assistance.co.uk/kb/win98se-usb-mass-storage-drivers.php | | On your older system you would do best with the 2.x version of the driver (the | installation of which is described in the middle of the page), the newest in English | being version 2.4: | http://www.technical-assistance.co.uk/drivers/nusb24e.exe | | Something to consider if you ever need to use that PNY flash drive with this older | system. | | Glad you got the ports working! | -- | Glen Ventura, MS MVP Shell/User, A+ | |
Guest Tony Yarwood Posted November 13, 2007 Posted November 13, 2007 Re: USB ports don't work on Win98SE On Tue, 13 Nov 2007 02:07:37 -0500, "MEB" <meb@not here@hotmail.com> wrote: Hi guys One thing has got me really puzzled with my USB, I've got a few of the generic drivers, Maximus Decim Version and a couple of others. Only with the one I installed on my old IBM laptop do I get that little "Unplug or eject hardware" icon in the system tray. Unfortunately I can't remember which one I used :( I've just tried the Maximus Decim on one of my m/c's and I don't get the icon. Anybody know which driver does? Best regards Tony
Guest glee Posted November 13, 2007 Posted November 13, 2007 Re: USB ports don't work on Win98SE I use the 2.x version of the Maximus Decim driver on machines at work which just have USB 1.1 ports, and also here on a machine with USB 2.0 ports, and they all show the icon in the tray. If you have the Maximus Decim driver installed along with other drivers on the same machine (other generics or other manufacturer drivers) you may not see the icon because you may be using the other driver. Uninstall all other USB devices' drivers if you plan on using the Maximus Decim driver. -- Glen Ventura, MS MVP Shell/User, A+ "Tony Yarwood" <Tony.Yarwood@XXXfreeuk.com> wrote in message news:8ucjj391ddg7l7s67sgpvn0u6ghfm4itam@4ax.com... > On Tue, 13 Nov 2007 02:07:37 -0500, "MEB" <meb@not here@hotmail.com> > wrote: > > Hi guys > > One thing has got me really puzzled with my USB, I've got a few of the > generic drivers, Maximus Decim Version and a couple of others. > > Only with the one I installed on my old IBM laptop do I get that > little "Unplug or eject hardware" icon in the system tray. > Unfortunately I can't remember which one I used :( > > I've just tried the Maximus Decim on one of my m/c's and I don't get > the icon. > > Anybody know which driver does? > > Best regards > > Tony
Guest glee Posted November 13, 2007 Posted November 13, 2007 Re: USB ports don't work on Win98SE Yes, there is the newer 3.x version driver, but for the old system being discussed, I think the 2.x driver is the better choice. YMMV. :-) -- Glen Ventura, MS MVP Shell/User, A+ "MEB" <meb@not here@hotmail.com> wrote in message news:%23%23MHKQcJIHA.1208@TK2MSFTNGP03.phx.gbl... > http://www.msfn.org/board/Maximum_Decim_Native_USB_Drivers_t43605.html > > Maximus Decim Native USB ver.3.2 > ------------------------------------------------------------------------ > *Native (without installation of additional drivers for each type) support > USB flash drives, digital photo > and videocameras and other similar devices. > *Universal Stack USB 2.0 (without installation of additional drivers for > each chipsets) with uninstall. > 1.Remove ALL drivers USB flash drives. > 2.Remove ALL drivers USB 2.0 controllers. > 3.Remove ALL unknown devices. > 4.Install NUSB 3.2 and reboot. > 5.After detection new USB 2.0 controllers (if it will occur) too it is > necessary to be reboot. > Remember! You install it at own risk! > ---------------------------------------------------------------------------- > ------------------------------------------- > English: http://rapidshare.com/files/66648662/nusb32e.exe.html > Russian: http://rapidshare.com/files/66648597/nusb32r.exe.html > > What's new? > *Add USB FDD + DISKTSD.VXD 4.90.3001 > *Fix USB2.IFX for ATI chipsets > *explorer.exe ver 4.72.3612.1700 > > Maximus Decim Native USB ver.3.1 > ------------------------------------------------------------------------ > English: http://rapidshare.com/files/19858514/nusb31e.exe.html > Russian: http://rapidshare.com/files/19858375/nusb31r.exe.html > > What's new? > *Downgrade USBSTOR.SYS (4.90.3000.1), removed wdmstub.sys > *CnMemore replaced Skymedi > > This post has been edited by maximus-decim: Nov 1 2007, 01:18 AM > > -- > MEB > http://peoplescounsel.orgfree.com > ________ > > > "glee" <glee29@spamindspring.com> wrote in message > news:OsLKnvYJIHA.3516@TK2MSFTNGP02.phx.gbl... > | "Tooter102" <biltie@gmail.com> wrote in message > | news:1194898832.370606.71060@s15g2000prm.googlegroups.com... > | > On Nov 11, 9:54 pm, "glee" <gle...@spamindspring.com> wrote: > | >> "Tooter102" <bil...@gmail.com> wrote in message > | >> > | >> news:1194833170.086912.17660@i13g2000prf.googlegroups.com... > | >> > | >> > | >> > | >> > On Nov 11, 11:01 am, "glee" <gle...@spamindspring.com> wrote > | >> > | >> >> "Tooter102" <bil...@gmail.com> wrote in message > | >> > | >> >>news:1194805870.782268.226770@k35g2000prh.googlegroups.com... > | >> > | >> >> > My husband has an old Dell 200Mhz machine that originally came > with > | >> >> > Win95. Upgraded recently to Win98SE, hoping to get the two > factory > | >> >> > 1.1 USB ports to work. They still don't. Under Add New Hardware, > I > | >> >> > was supposedly successful in adding a "USB Composite Device" and a > | >> >> > "USB Root Hub". But after doing that, they still did not appear > under > | >> >> > Device Manager. Any ideas what else I can do? > | >> > | >> >> Are the USB ports connected to a motherboard header, or are they > add-in cards? > | >> > | >> >> Do you have the USB ports enabled in the BIOS setup? > | >> > | >> > - - - - - > | >> > Thanks, we're now on the right track. No, USB was turned off in BIOS > | >> > so turned them on. After another reboot, got message "Found new > | >> > Hardware - USB 2.0 FD". My jump drive is USB 2.0 but assume that > | >> > doesn't matter. Then the Found new Hardware wizard showed up and I > | >> > tried installing the same USB items found in Device Manager as on my > | >> > newer Dell but it didn't like anything I selected. Nevertheless, > | >> > Device manager now shows 3 items under "USB Hub": Generic USB Hub; > | >> > USB Root Hub; and Intel 82371 SB PCI+USB Universal Host Controller. > | >> > | >> > However, the jump drive is still not appearing in Windows Explorer. > I > | >> > assume these 2 USB ports are part of the motherboard as didn't add on > | >> > anything. They are located directly beneath the mouse and keyboard > | >> > ports. > | >> > | >> > Next idea? (so far, so good). Kay > | >> > | >> OK, now you've added new info that was not in your original > post....that you are > | >> connecting a USB flash or "jump" drive. They need a Win98SE driver > installed to > | >> be > | >> detected. > | >> Did your drive come with a 98SE driver on diskette, or did you find and > download > | >> one > | >> from their website? > | >> What is the brand and model of the jump drive? > | >> > | >> "Found new Hardware - USB 2.0 FD" sounds like you have a USB-powered > Floppy Drive > | >> attached to the computer...do you? > | >> > | >> You indicate that you had manually added a "USB Composite Device" and a > "USB Root > | >> Hub" via Add New Hardware, but I assume you forced the installation > since they > | >> were > | >> not being detected by Windows. Now Windows has detected the correct > devices > | >> since > | >> your manually added devices were not correct. So, now you need to > remove ALL of > | >> them from Device Manager and let Windows re-detect just the correct > ones. Be > | >> sure > | >> the USB device (flash/jump drive) is NOT connected to the computer's > USB port. > | >> > | >> The best way to do this is from Safe Mode: > | >> - Start the computer and hold down the CTRL key till the Windows 98 > Startup menu > | >> (boot menu) appears. > | >> OR > | >> - Repeatedly tap the F8 key after the memory count to bring up the boot > menu. > | >> - Use the arrow keys to select "Safe Mode" and press Enter. > | >> > | >> Once in Safe Mode, open Device Manager and remove all the items listed > that you > | >> added and all the items that Windows detected after you enabled USB in > the BIOS. > | >> IOW, remove all the USB entries altogether. Also, if there is an > "Other" > | >> category > | >> in Device Manager in Safe Mode, remove everything in that category. > | >> Click OK, then restart the computer in normal mode (Start> Shutdown> > Restart), > | >> and > | >> let Windows detect the USB hubs and so forth with no interference from > you. > | >> > | >> At that point, you can install the Win98SE driver for the flash drive > if you have > | >> it. If you don't, you need to go to their support pages and > download/install > | >> their > | >> 98SE driver for that model device. > | >> If they don't provide a driver for Win98SE, let me know and I will > direct you to > | >> a > | >> download for a "generic" driver. > | > > | > SUCCESS! No, no USB-powered floppy drive. The PNY 2.0 USB drivers I > | > downloaded just weren't working. So decided to try my old 128MB Lexar > | > 1.1 jump drive (as that's really all I need) and found a driver and it > | > installed like a whiz. Maybe it just didn't like 2.0 when the ports > | > are only 1.1. Who knows, but without your help, couldn't have done it > | > so thanks again. Kay > | > | USB 2.0 devices like your PNY flash drive are *supposed* to be > backward-compatible > | with USB 1.1 ports. The drivers were probably just not working on your > system for > | some reason. One of my flash drives is a Memorex and I could never get > the > | downloaded 98SE drivers to install correctly either at work or at home, > despite the > | fact that others reported not having a problem with them on their systems. > I > | installed a generic USB driver after uninstalling all my other flash drive > drivers, > | and now all the flash drives I use are recognised right away, using that > one driver. > | > | Native USB Mass Storage Driver for Win98SE: > | > http://www.technical-assistance.co.uk/kb/win98se-usb-mass-storage-drivers.php > | > | On your older system you would do best with the 2.x version of the driver > (the > | installation of which is described in the middle of the page), the newest > in English > | being version 2.4: > | http://www.technical-assistance.co.uk/drivers/nusb24e.exe > | > | Something to consider if you ever need to use that PNY flash drive with > this older > | system. > | > | Glad you got the ports working! > | -- > | Glen Ventura, MS MVP Shell/User, A+ > | > | > >
Guest Tony Yarwood Posted November 13, 2007 Posted November 13, 2007 Re: USB ports don't work on Win98SE On Tue, 13 Nov 2007 14:35:47 -0500, "glee" <glee29@spamindspring.com> wrote: >I use the 2.x version of the Maximus Decim driver on machines at work which just >have USB 1.1 ports, and also here on a machine with USB 2.0 ports, and they all show >the icon in the tray. If you have the Maximus Decim driver installed along with >other drivers on the same machine (other generics or other manufacturer drivers) you >may not see the icon because you may be using the other driver. Uninstall all other >USB devices' drivers if you plan on using the Maximus Decim driver. Hi Glen Many thanks for that, I'll give it a whirl :) Best regards Tony
Guest Tony Yarwood Posted November 13, 2007 Posted November 13, 2007 Re: USB ports don't work on Win98SE On Tue, 13 Nov 2007 21:13:32 +0000, Tony Yarwood <Tony.Yarwood@XXXclara.co.uk> wrote: >On Tue, 13 Nov 2007 14:35:47 -0500, "glee" <glee29@spamindspring.com> >wrote: > >>I use the 2.x version of the Maximus Decim driver on machines at work which just >>have USB 1.1 ports, and also here on a machine with USB 2.0 ports, and they all show >>the icon in the tray. If you have the Maximus Decim driver installed along with >>other drivers on the same machine (other generics or other manufacturer drivers) you >>may not see the icon because you may be using the other driver. Uninstall all other >>USB devices' drivers if you plan on using the Maximus Decim driver. > >Hi Glen > >Many thanks for that, I'll give it a whirl :) > Can't figure out what I doing wrong. But I followed your advice, got version 2.4 went into safe mode deleted everything to do USB then installed 2.4 and then re-booted, but still no icon in the system tray. :( Best regards Tony
Guest glee Posted November 14, 2007 Posted November 14, 2007 Re: USB ports don't work on Win98SE "Tony Yarwood" <Tony.Yarwood@XXXclara.co.uk> wrote in message news:iv5kj3ds7ubg0adsn8jgrsorl5cobvr36n@4ax.com... > On Tue, 13 Nov 2007 21:13:32 +0000, Tony Yarwood > <Tony.Yarwood@XXXclara.co.uk> wrote: > >>On Tue, 13 Nov 2007 14:35:47 -0500, "glee" <glee29@spamindspring.com> >>wrote: >> >>>I use the 2.x version of the Maximus Decim driver on machines at work which just >>>have USB 1.1 ports, and also here on a machine with USB 2.0 ports, and they all >>>show >>>the icon in the tray. If you have the Maximus Decim driver installed along with >>>other drivers on the same machine (other generics or other manufacturer drivers) >>>you >>>may not see the icon because you may be using the other driver. Uninstall all >>>other >>>USB devices' drivers if you plan on using the Maximus Decim driver. >> >>Hi Glen >> >>Many thanks for that, I'll give it a whirl :) >> > Can't figure out what I doing wrong. But I followed your advice, got > version 2.4 went into safe mode deleted everything to do USB then > installed 2.4 and then re-booted, but still no icon in the system > tray. :( I was referring to uninstalling any *drivers* you had installed for the USB devices, from the device makers. Such as, if you had installed a driver for a particular flash drive from the flash drive manufacturer, uninstall that driver via Add/Remove Programs. Likewise, only have one "generic" driver installed on a system. If you still have problems, try posting on the forum MEB linked: http://www.msfn.org/board/index.php?showtopic=43605 -- Glen Ventura, MS MVP Shell/User, A+
Guest MEB Posted November 14, 2007 Posted November 14, 2007 Re: USB ports don't work on Win98SE Here's what is apparently suggested: Disconnect the USB flash drives, etc. In normal mode: 1. Go to Device Manager and delete the USB using devices/flash drives/etc. [see the CAUTION and 2. below], 2. *Then OR if you want to see if that is necessary or not, FIRST* delete the USB subs and hubs. Do NOT reboot yet. [The MD driver has an uninstall so if you try this first, just make sure your flash drive, etc. is NOT connected, uninstall the MD driver, Reboot, let Windows install the original USB drivers, save the registry, reboot, try the other way.] 3. Install the Maximus Decim driver. 4. ONLY then reboot to Normal Mode. Check to see if it installed in Device Manager, and via a %windir% Search for the files, and/or, via a registry Search, and/or, using MSInfo. A couple files to search for [3.1 version used as example]: usbhub20.sys - Version 5.00.2195.6891 - Product - Microsoft® Windows ® 2000 Operating System USBNTMAP.SYS - 4.90.3000 - Microsoft® Windows® Millennium Operating System usbstor.sys - 4.90.3000.1 - Microsoft® Windows® Millennium Operating System usbport.sys - 4.90.3000.1 - Microsoft® Windows® Millennium Operating System usbehci.sys - 5.00.2195.6882 - Microsoft® Windows ® 2000 Operating System 5. REBOOT 6. Check your devices/drives/cameras/whatever... Then, ONLY IF NECESSARY, install any *software* for individual devices.... CAUTION: Some have suggested that printer software, scanner software and the like CAN be left installed. Others, the opposite. It appears to depend upon the software, perhaps looking for its *own* port controls. -- MEB http://peoplescounsel.orgfree.com ________ "Tony Yarwood" <Tony.Yarwood@XXXclara.co.uk> wrote in message news:iv5kj3ds7ubg0adsn8jgrsorl5cobvr36n@4ax.com... | On Tue, 13 Nov 2007 21:13:32 +0000, Tony Yarwood | <Tony.Yarwood@XXXclara.co.uk> wrote: | | >On Tue, 13 Nov 2007 14:35:47 -0500, "glee" <glee29@spamindspring.com> | >wrote: | > | >>I use the 2.x version of the Maximus Decim driver on machines at work which just | >>have USB 1.1 ports, and also here on a machine with USB 2.0 ports, and they all show | >>the icon in the tray. If you have the Maximus Decim driver installed along with | >>other drivers on the same machine (other generics or other manufacturer drivers) you | >>may not see the icon because you may be using the other driver. Uninstall all other | >>USB devices' drivers if you plan on using the Maximus Decim driver. | > | >Hi Glen | > | >Many thanks for that, I'll give it a whirl :) | > | Can't figure out what I doing wrong. But I followed your advice, got | version 2.4 went into safe mode deleted everything to do USB then | installed 2.4 and then re-booted, but still no icon in the system | tray. :( | | Best regards | | Tony
Guest Tony Yarwood Posted November 14, 2007 Posted November 14, 2007 Re: USB ports don't work on Win98SE On Wed, 14 Nov 2007 03:58:00 -0500, "MEB" <meb@not here@hotmail.com> wrote: > > Here's what is apparently suggested: > Hi, thanks for all that, gotta work today, will give it a go tomorrow. Once again many thanks for your time and trouble; will keep you posted soon :) Best regards Tony
Guest MEB Posted November 14, 2007 Posted November 14, 2007 Re: USB ports don't work on Win98SE One more thing: When you install the MD driver, make sure you are NOT connected to the Internet, and if using USB network adapters, you recheck them for IP and other BEFORE attempting to connect to the Internet... krnl386.exe [actually the installed files running under the kernel] will/may be looking for DHCP/DNS/IP. Might want to lock down {local only or completely depending upon your needs} the exe BEFORE connecting to the Internet if it isn't already. Likely a good idea to run through all of the network settings and firewall *just in case*. -- MEB http://peoplescounsel.orgfree.com ________ "Tony Yarwood" <Tony.Yarwood@XXXclara.co.uk> wrote in message news:oe3mj3p75o7u5tja9jinlud54ugif66noo@4ax.com... | On Wed, 14 Nov 2007 03:58:00 -0500, "MEB" <meb@not here@hotmail.com> | wrote: | | > | > Here's what is apparently suggested: | > | Hi, thanks for all that, gotta work today, will give it a go tomorrow. | | Once again many thanks for your time and trouble; will keep you posted | soon :) | | Best regards | | Tony
Recommended Posts