Guest Shirl Posted November 24, 2007 Posted November 24, 2007 How do I get computer to recognize flash drive?
Guest Don Phillipson Posted November 24, 2007 Posted November 24, 2007 Re: win98; USB 2.0 flash drive "Shirl" <shysac@netscape.not> wrote in message news:etmog9oLIHA.484@TK2MSFTNGP06.phx.gbl... > How do I get computer to recognize flash drive? If the OS does not recognize the flash drive we must use / Settings / Control Panel / Add New Hardware. Note that original Win98 has USB.v.1 not 2. -- Don Phillipson Carlsbad Springs (Ottawa, Canada)
Guest teebo Posted November 24, 2007 Posted November 24, 2007 Re: win98; USB 2.0 flash drive > How do I get computer to recognize flash drive? what usb-memory drivers do you use? something that came with your memory or the unofficial windows 98se native USB drivers? http://www.mdgx.com/web.htm#NUS maximumdecims USB drivers are is now at version 3.3, so follow the link to http://www.msfn.org/board/Maximum-Decim-Native-USB-Drivers-t43605.html to get that version. perhaps you can try to remove the old usb devicedrivers you have and reinstall with the new ones. (also, if you have a usb-memory with that ugly "U3"-thing that makes your computer autostart softwares just by inserting it, then you should probably remove the U3-software from it to get rid of the virtual cd-rom reader that they emulate to do their dirty things. You need to run some u3-remover-application you can get from u3's support webpages or the usb-memorys manufaturer then)
Guest Shirl Posted November 25, 2007 Posted November 25, 2007 Re: win98; USB 2.0 flash drive teebo, I currently use windows 98 USB drivers, I suspect that is my problem. I have heard that there were drivers available that would win98 run USB 2.0, I've searched but have been unable to locate such a driver. The flash drives are Kingston and they work fine on my xp machine. I was hoping I could use usb drives to transfer files. Thanks everyone, Shirl "teebo" <no@mail.no> wrote in message news:op.t2bb1id6br8ivg@300pl... >> How do I get computer to recognize flash drive? > > what usb-memory drivers do you use? something that came with your memory > or the > unofficial windows 98se native USB drivers? > http://www.mdgx.com/web.htm#NUS > > maximumdecims USB drivers are is now at version 3.3, so follow the link to > http://www.msfn.org/board/Maximum-Decim-Native-USB-Drivers-t43605.html > to get that version. > > perhaps you can try to remove the old usb devicedrivers you have and > reinstall with the new ones. > > (also, if you have a usb-memory with that ugly "U3"-thing that makes > your computer autostart softwares just by inserting it, then you should > probably remove the U3-software from it to get rid of the virtual > cd-rom reader that they emulate to do their dirty things. You need to > run some u3-remover-application you can get from u3's support webpages > or the usb-memorys manufaturer then) >
Guest Robert Baer Posted November 25, 2007 Posted November 25, 2007 Re: win98; USB 2.0 flash drive Shirl wrote: > teebo, > I currently use windows 98 USB drivers, I suspect that is my problem. I have > heard that there were drivers available that > would win98 run USB 2.0, I've searched but have been unable to locate such a > driver. The flash drives are Kingston and they work fine on my xp machine. I > was hoping I could use usb drives to transfer files. Thanks everyone, > Shirl > > "teebo" <no@mail.no> wrote in message news:op.t2bb1id6br8ivg@300pl... > >>>How do I get computer to recognize flash drive? >> >>what usb-memory drivers do you use? something that came with your memory >>or the >>unofficial windows 98se native USB drivers? >>http://www.mdgx.com/web.htm#NUS >> >>maximumdecims USB drivers are is now at version 3.3, so follow the link to >>http://www.msfn.org/board/Maximum-Decim-Native-USB-Drivers-t43605.html >>to get that version. >> >>perhaps you can try to remove the old usb devicedrivers you have and >>reinstall with the new ones. >> >>(also, if you have a usb-memory with that ugly "U3"-thing that makes >>your computer autostart softwares just by inserting it, then you should >>probably remove the U3-software from it to get rid of the virtual >>cd-rom reader that they emulate to do their dirty things. You need to >>run some u3-remover-application you can get from u3's support webpages >>or the usb-memorys manufaturer then) >> > > > Well, i got bit when i bought a Verbatim flash drive (was cheap as all heck). Seems they have a number of variants, and within one "type" there are yet more variants. And i got the *only* variant that the "driver" software is not only incomplete, but (according to Verbatim) cannot work due to the chip (hardware) inside. The "good" news is that Win2K works with it OK and needs no MFG driver. Would be nice if ther was a "generic" USB2.0 flash driver.....
Guest rebel Posted November 25, 2007 Posted November 25, 2007 Re: win98; USB 2.0 flash drive On Sat, 24 Nov 2007 16:16:08 -0800, "Shirl" <shysac@netscape.not> wrote: >teebo, >I currently use windows 98 USB drivers, I suspect that is my problem. I have >heard that there were drivers available that >would win98 run USB 2.0, I've searched but have been unable to locate such a >driver. The flash drives are Kingston and they work fine on my xp machine. I >was hoping I could use usb drives to transfer files. Thanks everyone, >Shirl If you plan on using device-specific (i.e. not the native USB) drivers, you will need to identify the device. This means finding out what it really is under the Kingston label. Fortunately, XP will help you do the ID bit and then google for the specific device's 98SE-compatible driver.
Guest glee Posted November 25, 2007 Posted November 25, 2007 Re: win98; USB 2.0 flash drive What is the model of the Kingston flash drive? Have you looked yet on their support site to see if they have drivers for Win98? Do you have Win98 or Win98SE? You still have not answered that question, posed by Ron in an earlier reply. An alternative is to use the third-party generic Native USB Mass Storage Driver for Win98: http://www.technical-assistance.co.uk/kb/usbmsd98.php It shows you on that web page how to determine whether you have 98 or 98SE. Choose the download link on that page for the version of 98 you have. If you haven't yet installed any drivers from Kingston for the flash drive, make sure the flash drive is NOT inserted into your computer's USB port, go into Device Manager and delete the Unknown devices in the "Other" category, click OK, then run the downloaded installer, follow the prompts, and reboot. (To find Device Manager, hold the Windows Key on the keyboard and press the Pause/Break key, then release both, then click the Device manager tab). Note that USB 2.0 must be supported by your computer's hardware, otherwise the drives will operate at USB 1.1 speed. If the computer came new with Win98 or 98SE on it, it is probably not going to have USB 2.0-capable ports....the flash drives will still work, but at the slower speed. -- Glen Ventura, MS MVP Shell/User, A+ "Shirl" <shysac@netscape.not> wrote in message news:%23alOphvLIHA.5988@TK2MSFTNGP02.phx.gbl... > teebo, > I currently use windows 98 USB drivers, I suspect that is my problem. I have heard > that there were drivers available that > would win98 run USB 2.0, I've searched but have been unable to locate such a > driver. The flash drives are Kingston and they work fine on my xp machine. I was > hoping I could use usb drives to transfer files. Thanks everyone, Shirl > > "teebo" <no@mail.no> wrote in message news:op.t2bb1id6br8ivg@300pl... >>> How do I get computer to recognize flash drive? >> >> what usb-memory drivers do you use? something that came with your memory or the >> unofficial windows 98se native USB drivers? http://www.mdgx.com/web.htm#NUS >> >> maximumdecims USB drivers are is now at version 3.3, so follow the link to >> http://www.msfn.org/board/Maximum-Decim-Native-USB-Drivers-t43605.html >> to get that version. >> >> perhaps you can try to remove the old usb devicedrivers you have and >> reinstall with the new ones. >> >> (also, if you have a usb-memory with that ugly "U3"-thing that makes >> your computer autostart softwares just by inserting it, then you should >> probably remove the U3-software from it to get rid of the virtual >> cd-rom reader that they emulate to do their dirty things. You need to >> run some u3-remover-application you can get from u3's support webpages >> or the usb-memorys manufaturer then) >> > >
Guest Robert Baer Posted November 26, 2007 Posted November 26, 2007 Re: win98; USB 2.0 flash drive glee wrote: > What is the model of the Kingston flash drive? Have you looked yet on > their support site to see if they have drivers for Win98? > > Do you have Win98 or Win98SE? You still have not answered that > question, posed by Ron in an earlier reply. > > An alternative is to use the third-party generic Native USB Mass Storage > Driver for Win98: > http://www.technical-assistance.co.uk/kb/usbmsd98.php > > It shows you on that web page how to determine whether you have 98 or 98SE. > > Choose the download link on that page for the version of 98 you have. > > If you haven't yet installed any drivers from Kingston for the flash > drive, make sure the flash drive is NOT inserted into your computer's > USB port, go into Device Manager and delete the Unknown devices in the > "Other" category, click OK, then run the downloaded installer, follow > the prompts, and reboot. > > (To find Device Manager, hold the Windows Key on the keyboard and press > the Pause/Break key, then release both, then click the Device manager tab). > > Note that USB 2.0 must be supported by your computer's hardware, > otherwise the drives will operate at USB 1.1 speed. If the computer > came new with Win98 or 98SE on it, it is probably not going to have USB > 2.0-capable ports....the flash drives will still work, but at the slower > speed. Use Win98SE; downloaded Verbatim driver for the "orphan" flash drive, and discoveres what i mentioned.. Verbatim management is busy sitting on their hands for a fix of *any* type. Thanks on the generic driver; will try it.
Guest Robert Baer Posted November 26, 2007 Posted November 26, 2007 Re: win98; USB 2.0 flash drive Robert Baer wrote: > glee wrote: > >> What is the model of the Kingston flash drive? Have you looked yet on >> their support site to see if they have drivers for Win98? >> >> Do you have Win98 or Win98SE? You still have not answered that >> question, posed by Ron in an earlier reply. >> >> An alternative is to use the third-party generic Native USB Mass >> Storage Driver for Win98: >> http://www.technical-assistance.co.uk/kb/usbmsd98.php >> >> It shows you on that web page how to determine whether you have 98 or >> 98SE. >> >> Choose the download link on that page for the version of 98 you have. >> >> If you haven't yet installed any drivers from Kingston for the flash >> drive, make sure the flash drive is NOT inserted into your computer's >> USB port, go into Device Manager and delete the Unknown devices in the >> "Other" category, click OK, then run the downloaded installer, follow >> the prompts, and reboot. >> >> (To find Device Manager, hold the Windows Key on the keyboard and >> press the Pause/Break key, then release both, then click the Device >> manager tab). >> >> Note that USB 2.0 must be supported by your computer's hardware, >> otherwise the drives will operate at USB 1.1 speed. If the computer >> came new with Win98 or 98SE on it, it is probably not going to have >> USB 2.0-capable ports....the flash drives will still work, but at the >> slower speed. > > Use Win98SE; downloaded Verbatim driver for the "orphan" flash drive, > and discoveres what i mentioned.. Verbatim management is busy sitting on > their hands for a fix of *any* type. > Thanks on the generic driver; will try it. *FAR OUT* !!! The driver works for my "orphan" drive! Heck, i even see the (Win2K) familiar "eject" icon in the tray! **** T H A N K S ! ! ****
Guest glee Posted November 26, 2007 Posted November 26, 2007 Re: win98; USB 2.0 flash drive "Robert Baer" <robertbaer@localnet.com> wrote in message news:13kkf1p1taama61@corp.supernews.com... > Robert Baer wrote: >> glee wrote: >> >>> What is the model of the Kingston flash drive? Have you looked yet on their >>> support site to see if they have drivers for Win98? >>> >>> Do you have Win98 or Win98SE? You still have not answered that question, posed >>> by Ron in an earlier reply. >>> >>> An alternative is to use the third-party generic Native USB Mass Storage Driver >>> for Win98: >>> http://www.technical-assistance.co.uk/kb/usbmsd98.php >>> >>> It shows you on that web page how to determine whether you have 98 or 98SE. >>> >>> Choose the download link on that page for the version of 98 you have. >>> >>> If you haven't yet installed any drivers from Kingston for the flash drive, make >>> sure the flash drive is NOT inserted into your computer's USB port, go into >>> Device Manager and delete the Unknown devices in the "Other" category, click OK, >>> then run the downloaded installer, follow the prompts, and reboot. >>> >>> (To find Device Manager, hold the Windows Key on the keyboard and press the >>> Pause/Break key, then release both, then click the Device manager tab). >>> >>> Note that USB 2.0 must be supported by your computer's hardware, otherwise the >>> drives will operate at USB 1.1 speed. If the computer came new with Win98 or >>> 98SE on it, it is probably not going to have USB 2.0-capable ports....the flash >>> drives will still work, but at the slower speed. >> >> Use Win98SE; downloaded Verbatim driver for the "orphan" flash drive, and >> discoveres what i mentioned.. Verbatim management is busy sitting on their hands >> for a fix of *any* type. >> Thanks on the generic driver; will try it. > *FAR OUT* !!! > The driver works for my "orphan" drive! > Heck, i even see the (Win2K) familiar "eject" icon in the tray! > **** T H A N K S ! ! **** YW, Robert.....glad to hear it. -- Glen Ventura, MS MVP Shell/User, A+
Recommended Posts