Guest ms Posted December 16, 2007 Posted December 16, 2007 P166, had W95, then formatted with a W95 boot disk. Loaded several DOS programs, normal folder situation. On bootup, I kept seeing a W95 logo, starting W95, then it booted to a C prompt. There was a small partition, non-DOS. Did Fdisk and removed the non-DOS partition. Ran Fdisk again, now only C, no partitions. empty. Reformatted using the W95 boot disk. Since I will be working with old DOS games intended for DOS 6, tried to reformat with a DOS 6.22 boot disk, message "wrong DOS version". Tried to install Dos 6.22, it's method is leave the boot disk in and reboot, install will start. Did that, "missing system disk, insert..." with the DOS 6 boot disk. Rebooted to (W95) C prompt. Copied the 3 DOS install disks to a new DOS directory in C. Rebooted, DIR at C shows the DOS directory C CD\DOS, "invalid directory" tried several change directory commands, none work. Problem: The normal change directory function does not seem to work. Advice ms
Guest Brian A. Posted December 16, 2007 Posted December 16, 2007 Re: DOS question "ms" <ms@invalid.com> wrote in message news:5slpofF1a3nirU1@mid.individual.net... > > Rebooted to (W95) C prompt. > > Copied the 3 DOS install disks to a new DOS directory in C. > > Rebooted, DIR at C shows the DOS directory > > C CD\DOS, "invalid directory" tried several change directory commands, > none work. Are you actually typing C CD\DOS? If yes don't, leave the C out. > > Problem: The normal change directory function does not seem to work. > > Advice > > ms > -- Brian A. Sesko { MS MVP_Shell/User } Conflicts start where information lacks. http://basconotw.mvps.org/ Suggested posting do's/don'ts: http://www.dts-l.org/goodpost.htm How to ask a question: http://support.microsoft.com/kb/555375
Guest Brian A. Posted December 16, 2007 Posted December 16, 2007 Re: DOS question Sorry, should be: Leave the C out and type: cd dos -- Brian A. Sesko { MS MVP_Shell/User } Conflicts start where information lacks. http://basconotw.mvps.org/ Suggested posting do's/don'ts: http://www.dts-l.org/goodpost.htm How to ask a question: http://support.microsoft.com/kb/555375
Guest philo Posted December 17, 2007 Posted December 17, 2007 Re: DOS question "ms" <ms@invalid.com> wrote in message news:5slpofF1a3nirU1@mid.individual.net... > P166, had W95, then formatted with a W95 boot disk. Loaded several DOS > programs, normal folder situation. > > On bootup, I kept seeing a W95 logo, starting W95, then it booted to a C > prompt. There was a small partition, non-DOS. Did Fdisk and removed the > non-DOS partition. Ran Fdisk again, now only C, no partitions. empty. > > Reformatted using the W95 boot disk. > > Since I will be working with old DOS games intended for DOS 6, tried to > reformat with a DOS 6.22 boot disk, message "wrong DOS version". > > Tried to install Dos 6.22, it's method is leave the boot disk in and > reboot, install will start. > > Did that, "missing system disk, insert..." with the DOS 6 boot disk. > > Rebooted to (W95) C prompt. > > Copied the 3 DOS install disks to a new DOS directory in C. > > Rebooted, DIR at C shows the DOS directory > > C CD\DOS, "invalid directory" tried several change directory commands, > none work. > > Problem: The normal change directory function does not seem to work. > > The win95 logo is normal and once to boot to the C: prompt... you will be booted to dos7 and it should work just fine. (you can get rid of the logo by editing a line in msdos.sys for no logo, there should be one line that reads logo=0 anyway if you wan to start all over and install an older version of dos... if the drive is fat16 you CAN format the drive using a dos boot disk but you MUST format it from the A: drive and the boot floppy must of course have "format" on it
Guest ms Posted December 17, 2007 Posted December 17, 2007 Re: DOS question "Brian A." <gonefish'n@afarawaylake> wrote in news:#eRquqDQIHA.5980 @TK2MSFTNGP04.phx.gbl: > Sorry, should be: > > Leave the C out and type: > > cd dos > Thanks, Brian cd DOS "invalid directory" I took pains to use caps for the directory as it was named in caps. It boots up with the W95 logo and message starting W95 again as before the Fdisk work, as if I didn't change anything, so still a puzzle. ms
Guest ms Posted December 17, 2007 Posted December 17, 2007 Re: DOS question "philo" <philo@privacy.net> wrote in news:#h2LQcEQIHA.4740@TK2MSFTNGP02.phx.gbl: > > "ms" <ms@invalid.com> wrote in message > news:5slpofF1a3nirU1@mid.individual.net... >> P166, had W95, then formatted with a W95 boot disk. Loaded several >> DOS programs, normal folder situation. >> >> On bootup, I kept seeing a W95 logo, starting W95, then it booted to >> a C prompt. There was a small partition, non-DOS. Did Fdisk and >> removed the non-DOS partition. Ran Fdisk again, now only C, no >> partitions. empty. >> >> Reformatted using the W95 boot disk. >> >> Since I will be working with old DOS games intended for DOS 6, tried >> to reformat with a DOS 6.22 boot disk, message "wrong DOS version". >> >> Tried to install Dos 6.22, it's method is leave the boot disk in and >> reboot, install will start. >> >> Did that, "missing system disk, insert..." with the DOS 6 boot disk. >> >> Rebooted to (W95) C prompt. >> >> Copied the 3 DOS install disks to a new DOS directory in C. >> >> Rebooted, DIR at C shows the DOS directory >> >> C CD\DOS, "invalid directory" tried several change directory >> commands, none work. >> >> Problem: The normal change directory function does not seem to work. >> >> > > > The win95 logo is normal and once to boot to the C: prompt... > you will be booted to dos7 and it should work just fine. > (you can get rid of the logo by editing a line in msdos.sys > for no logo, there should be one line that reads > > logo=0 > > anyway if you wan to start all over and install an older version of > dos... if the drive is fat16 you CAN format the drive using a dos boot > disk but you MUST format it from the A: drive > and the boot floppy must of course have "format" on it > > Thanks. I had thought that DOS 7 started with W98, but anyway, I want a "original" DOS machine. So your way is what I wanted to try. I tried exactly that, a DOS 6.22 disk with Format on it, ran format c: /s, "incorrect DOS version" ?? ms
Guest CB Posted December 17, 2007 Posted December 17, 2007 Re: DOS question When I wanted to install MS Dos 6.22 on a machine that had W95 B which was in Fat 32 this worked for me. Format the drive with the W95 disk. Decline the over 500 MB option and it will format it in FAT 16. Then put Disk 1 of the 3 MS Dos 6.22 disks in the A Drive and turn machine off. Then turn on. It will install your Dos and re-format in Fat 16. If the drive is over 2 gigs, partition so you can use all the space. Fat 16 dos only sees 2 gigs. As I said, worked for me. I hope for you also. Regards...
Guest Lil' Dave Posted December 17, 2007 Posted December 17, 2007 Re: DOS question "ms" <ms@invalid.com> wrote in message news:5slpofF1a3nirU1@mid.individual.net... > P166, had W95, then formatted with a W95 boot disk. Loaded several DOS > programs, normal folder situation. > > On bootup, I kept seeing a W95 logo, starting W95, then it booted to a C > prompt. There was a small partition, non-DOS. Did Fdisk and removed the > non-DOS partition. Ran Fdisk again, now only C, no partitions. empty. > > Reformatted using the W95 boot disk. > > Since I will be working with old DOS games intended for DOS 6, tried to > reformat with a DOS 6.22 boot disk, message "wrong DOS version". > > Tried to install Dos 6.22, it's method is leave the boot disk in and > reboot, install will start. > > Did that, "missing system disk, insert..." with the DOS 6 boot disk. > > Rebooted to (W95) C prompt. > > Copied the 3 DOS install disks to a new DOS directory in C. > > Rebooted, DIR at C shows the DOS directory > > C CD\DOS, "invalid directory" tried several change directory commands, > none work. > > Problem: The normal change directory function does not seem to work. > > Advice > > ms > If I read correctly at the end of a prior thread, your intent is to run MS-DOS 6.22. Create an environment suitable for "dos" games. Run dos games. What you've done in per this post is leaving me scratching my head. You need to install MS-DOS 6.22 from its own 3 diskette installation media to a bootable active primary FAT formatted partition. Do nothing else. Afterwards, you need to implement either (depending on the game) extended memory or expanded memory environment at minimum using himem.sys and emm.exe. You may, if needed for undefined game parameters and undefined hardware, write a line to implement the mouse, write a line or more to implement the sound card, for such an ms-dos environment. Will be in the autoexec.bat. You may, if needed, reserve upper memory for implementation of your mouse driver and other drivers in that portion of memory if using extended memory. You may, if needed, instruct to load dos in upper memory to allow more usage of base memory. Unless properly implemented in an extended memory environment, upper memory is not used. Base memory is the first 640K. Extended memory begins at 1MB and ends at 4MB for MS-DOS 6.22. Dave
Guest philo Posted December 17, 2007 Posted December 17, 2007 Re: DOS question > > > Thanks. > > I had thought that DOS 7 started with W98, but anyway, I want a > "original" DOS machine. So your way is what I wanted to try. > > I tried exactly that, a DOS 6.22 disk with Format on it, ran format c: > /s, "incorrect DOS version" > > ?? > > ms If you are running "format" from the boot floppy and get the "incorrect version" method... thatg means that the format command on the floppy is NOT from the same version of dos that the boot floppy was made from. I'd get a new dos floppy made up and try again get one here http://www.bootdisk.com
Guest Don Phillipson Posted December 17, 2007 Posted December 17, 2007 Re: DOS question "ms" <ms@invalid.com> wrote in message news:5slvhaF19nfn7U1@mid.individual.net... > > cd dos > . . . > cd DOS > > "invalid directory" 1. From this prompt, do DIR D*.* This will generate a directory of all files and folders beginning with D but only in the folder where you are currently logged. To be sure you are in the root directory do a couple of times CD.. that is C D dot dot (with no spaces) which is the command to Change Directory up one level e.g. C:\Windows > CD.. C:\> DIR D*.* Directory of C:\ DOS <DIR> with details DEL BAT with details DOS is "unforgiving" in that every keystroke must be correct. -- Don Phillipson Carlsbad Springs (Ottawa, Canada)
Guest ms Posted December 17, 2007 Posted December 17, 2007 Re: DOS question ms <ms@invalid.com> wrote in news:5slpofF1a3nirU1@mid.individual.net: > P166, had W95, then formatted with a W95 boot disk. Loaded several DOS > programs, normal folder situation. > > On bootup, I kept seeing a W95 logo, starting W95, then it booted to a C > prompt. There was a small partition, non-DOS. Did Fdisk and removed the > non-DOS partition. Ran Fdisk again, now only C, no partitions. empty. > > Reformatted using the W95 boot disk. > > Since I will be working with old DOS games intended for DOS 6, tried to > reformat with a DOS 6.22 boot disk, message "wrong DOS version". > > Tried to install Dos 6.22, it's method is leave the boot disk in and > reboot, install will start. > > Did that, "missing system disk, insert..." with the DOS 6 boot disk. > > Rebooted to (W95) C prompt. > > Copied the 3 DOS install disks to a new DOS directory in C. > > Rebooted, DIR at C shows the DOS directory > > C CD\DOS, "invalid directory" tried several change directory commands, > none work. > > Problem: The normal change directory function does not seem to work. > > Advice > > ms > Thanks to all. Bootup this AM things look a little different: 1. Bootup, still W95 logo, starting W95, winds up at C prompt. Change of directory on C still does not work. There is still some hidden space on that hard drive, maybe why I still see W95 messages? So I tried to fisk again to include the entire hard drive. 2. If I put in a W95 boot disk at this point, fdisk- "wrong DOS version" 3. If I put in a DOS 6.22 disk #1, fdisk - "wrong DOS version" 4. Somewhere in this process, I was able to run fdisk, delete primary logical partition, it called for the volume name, how to find that? 5. Turn off, boot with DOS 6.22 disk #1, setup, it starts usual install, stops- message "can't install, there is already another version of DOS" Yesterday, it did not start the install, so this is some progress. Advice? ms
Guest Ben Myers Posted December 17, 2007 Posted December 17, 2007 Re: DOS question "ms" <ms@invalid.com> wrote in message news:5sni1cF1a55g2U1@mid.individual.net... > Thanks to all. Bootup this AM things look a little different: > 1. Bootup, still W95 logo, starting W95, winds up at C prompt. This is normal for the version of DOS that comes with Windows 95. > Change of directory on C still does not work. The directory probably doesn't exist. Try typing "dir /ad /p c:\" to see them all. > There is still some hidden space on that hard drive, maybe why I still > see W95 messages? Please explain why you think this is so. > So I tried to fisk again to include the entire hard > drive. > 2. If I put in a W95 boot disk at this point, fdisk- "wrong DOS version" Try booting with the Windows 95 boot disk, then run fdisk. > 3. If I put in a DOS 6.22 disk #1, fdisk - "wrong DOS version" Try booting with a DOS 6.22 boot disk first. > 4. Somewhere in this process, I was able to run fdisk, delete primary > logical partition, it called for the volume name, how to find that? It's the first line displayed when using the "dir" command. Volume in drive C is ... > 5. Turn off, boot with DOS 6.22 disk #1, setup, it starts usual install, > stops- message "can't install, there is already another version of DOS" > Yesterday, it did not start the install, so this is some progress. > Advice? Format the drive using a DOS 6.22 boot disk. Ben
Guest ms Posted December 17, 2007 Posted December 17, 2007 Re: DOS question "Don Phillipson" <d.phillipsonSPAMBLOCK@rogers.com> wrote in news:e7 #wnlMQIHA.3556@TK2MSFTNGP03.phx.gbl: > "ms" <ms@invalid.com> wrote in message > news:5slvhaF19nfn7U1@mid.individual.net... > >> > cd dos >> . . . >> cd DOS >> >> "invalid directory" > > 1. From this prompt, do > DIR D*.* > This will generate a directory of all files and > folders beginning with D > but only in the folder where you are currently > logged. To be sure you are in the root directory > do a couple of times > CD.. > that is C D dot dot (with no spaces) > which is the command to Change Directory up > one level e.g. > C:\Windows > CD.. > C:\> DIR D*.* > Directory of C:\ > DOS <DIR> with details > DEL BAT with details > > DOS is "unforgiving" in that every keystroke > must be correct. > Thanks, Don CD.. shows "invalid directory" DIR*.* shows this: DOS 14806 DO6 6700 2 files 0 directories The above may be an idication to what is wrong. Earlier I could not install DOS. So I used copy *.* c:\DO6 to copy all DOS files from the 3 install disks to a new directory DO6. The copy function appeared normal. Previously, I copied the files from the W95 boot disk using copy *.* c: \DOS. The copy function appeared normal. But above, results say no directories, 2 files. And a directory of the files of 3 DOS install disks are surely more than 6700 bytes. Maybe there are no directories in C, wrong copy path statement? ms
Guest ms Posted December 17, 2007 Posted December 17, 2007 Re: DOS question "Ben Myers" <benjmyers@mindR-e-m-o-v-Espring.com> wrote in news:eLgUuoMQIHA.280@TK2MSFTNGP03.phx.gbl: > "ms" <ms@invalid.com> wrote in message > news:5sni1cF1a55g2U1@mid.individual.net... >> Thanks to all. Bootup this AM things look a little different: >> 1. Bootup, still W95 logo, starting W95, winds up at C prompt. > > This is normal for the version of DOS that comes with Windows 95. > >> Change of directory on C still does not work. > > The directory probably doesn't exist. Try typing "dir /ad /p c:\" > to see them all. > Volume in drive C has no label volume s/n is .... Display of c:\ file not found Please see my reply to Don, this confirms there are no folders in C. >> There is still some hidden space on that hard drive, maybe why I >> still > >> see W95 messages? > > Please explain why you think this is so. > A senior moment. >> So I tried to fisk again to include the entire hard >> drive. >> 2. If I put in a W95 boot disk at this point, fdisk- "wrong DOS > version" > > Try booting with the Windows 95 boot disk, then run fdisk. Incorrect MSDOS version. I have seen both the W95 and DOS 6.22 give wrong version, it used to have W95 installed? > >> 3. If I put in a DOS 6.22 disk #1, fdisk - "wrong DOS version" > > Try booting with a DOS 6.22 boot disk first. Invalid system disk, replace disk..... > >> 4. Somewhere in this process, I was able to run fdisk, delete primary >> logical partition, it called for the volume name, how to find that? > > It's the first line displayed when using the "dir" command. > > Volume in drive C is ... > >> 5. Turn off, boot with DOS 6.22 disk #1, setup, it starts usual > install, >> stops- message "can't install, there is already another version of > DOS" >> Yesterday, it did not start the install, so this is some progress. >> Advice? > > Format the drive using a DOS 6.22 boot disk. > > Ben I would like to, mentioned in another reply, "another version of DOS is present". One thing that is evident from your and Don's post, the reason the CD command does not work is because there is no directories present. So the remaining issue is how to format the drive in DOS 6.22, several methods seem to not work on this drive. Sorry, can't recall, but had this issue before on another machine awhile ago, removing W9X, to use DOS, message "another version of DOS is present" after formatting. I thought format removed all contents. ms
Guest Ben Myers Posted December 17, 2007 Posted December 17, 2007 Re: DOS question "ms" <ms@invalid.com> wrote in message news:5snq9aF19phe8U1@mid.individual.net... > "Ben Myers" <benjmyers@mindR-e-m-o-v-Espring.com> wrote in > news:eLgUuoMQIHA.280@TK2MSFTNGP03.phx.gbl: >> > > > Format the drive using a DOS 6.22 boot disk. > > > > Ben > > I would like to, mentioned in another reply, "another version of DOS is > present". > One thing that is evident from your and Don's post, the reason the CD > command does not work is because there is no directories present. > So the remaining issue is how to format the drive in DOS 6.22, several > methods seem to not work on this drive. Try creating a fresh DOS 6.22 boot floppy. http://www.bootdisk.com/bootdisk.htm Be sure to boot from the floppy and run fdisk and format from the A:\> prompt. Ben
Guest ms Posted December 17, 2007 Posted December 17, 2007 Re: DOS question "philo" <philo@privacy.net> wrote in news:uIZJFeKQIHA.5360 @TK2MSFTNGP03.phx.gbl: > > >> > >> Thanks. >> >> I had thought that DOS 7 started with W98, but anyway, I want a >> "original" DOS machine. So your way is what I wanted to try. >> >> I tried exactly that, a DOS 6.22 disk with Format on it, ran format c: >> /s, "incorrect DOS version" >> >> ?? >> >> ms > > > If you are running "format" from the boot floppy and get the "incorrect > version" method... > thatg means that the format command on the floppy is NOT from the same > version of dos that the boot floppy was made from. > > I'd get a new dos floppy made up and try again > > > get one here > http://www.bootdisk.com > > Thanks again, Philo. That's all it took, a new boot disk. ms
Guest ms Posted December 17, 2007 Posted December 17, 2007 Re: DOS question "Ben Myers" <benjmyers@mindR-e-m-o-v-Espring.com> wrote in news:enWyucNQIHA.2376@TK2MSFTNGP02.phx.gbl: > > "ms" <ms@invalid.com> wrote in message > news:5snq9aF19phe8U1@mid.individual.net... >> "Ben Myers" <benjmyers@mindR-e-m-o-v-Espring.com> wrote in >> news:eLgUuoMQIHA.280@TK2MSFTNGP03.phx.gbl: >>> > >> > Format the drive using a DOS 6.22 boot disk. >> > >> > Ben >> >> I would like to, mentioned in another reply, "another version of DOS > is >> present". >> One thing that is evident from your and Don's post, the reason the CD >> command does not work is because there is no directories present. >> So the remaining issue is how to format the drive in DOS 6.22, >> several > >> methods seem to not work on this drive. > > Try creating a fresh DOS 6.22 boot floppy. > > http://www.bootdisk.com/bootdisk.htm > > Be sure to boot from the floppy and run fdisk and format > from the A:\> prompt. > > Ben Ben, thanks, you are always helpful. Having tried other things, finally your help above did the trick, as Philo mentioned earlier. A boot disk from that site has all the needed files on one disk, no install is necessary, which helped in this case. Everything worked fine, fdisk, format, boots up to a DOS 6.22 C prompt. No W95 mention at all. It is finally a true DOS machine. Now, one minor glitch, each bootup it asks for confirm date and time, maybe thats a DOS default to live with. Thanks again ms
Guest Ben Myers Posted December 17, 2007 Posted December 17, 2007 Re: DOS question "ms" <ms@invalid.com> wrote in message news:5snvrhF19ircnU2@mid.individual.net... > "Ben Myers" <benjmyers@mindR-e-m-o-v-Espring.com> wrote in > news:enWyucNQIHA.2376@TK2MSFTNGP02.phx.gbl: > Ben, thanks, you are always helpful. > Having tried other things, finally your help above did the trick, as > Philo mentioned earlier. A boot disk from that site has all the needed > files on one disk, no install is necessary, which helped in this case. > Everything worked fine, fdisk, format, boots up to a DOS 6.22 C prompt. > No W95 mention at all. It is finally a true DOS machine. > Now, one minor glitch, each bootup it asks for confirm date and time, > maybe thats a DOS default to live with. Create a "c:\autoexec.bat" file. It can be empty or one that actually does something. Ben
Guest philo Posted December 17, 2007 Posted December 17, 2007 Re: DOS question "ms" <ms@invalid.com> wrote in message news:5snvepF19ircnU1@mid.individual.net... > "philo" <philo@privacy.net> wrote in news:uIZJFeKQIHA.5360 > @TK2MSFTNGP03.phx.gbl: > > > > > > >> > > >> Thanks. > >> > >> I had thought that DOS 7 started with W98, but anyway, I want a > >> "original" DOS machine. So your way is what I wanted to try. > >> > >> I tried exactly that, a DOS 6.22 disk with Format on it, ran format c: > >> /s, "incorrect DOS version" > >> > >> ?? > >> > >> ms > > > > > > If you are running "format" from the boot floppy and get the "incorrect > > version" method... > > thatg means that the format command on the floppy is NOT from the same > > version of dos that the boot floppy was made from. > > > > I'd get a new dos floppy made up and try again > > > > > > get one here > > http://www.bootdisk.com > > > > > Thanks again, Philo. That's all it took, a new boot disk. > > ms Good deal!!!!
Guest ms Posted December 17, 2007 Posted December 17, 2007 Re: DOS question "Ben Myers" <benjmyers@mindR-e-m-o-v-Espring.com> wrote in news:#Ps6pTOQIHA.6036@TK2MSFTNGP03.phx.gbl: > "ms" <ms@invalid.com> wrote in message > news:5snvrhF19ircnU2@mid.individual.net... >> "Ben Myers" <benjmyers@mindR-e-m-o-v-Espring.com> wrote in >> news:enWyucNQIHA.2376@TK2MSFTNGP02.phx.gbl: >> Ben, thanks, you are always helpful. >> Having tried other things, finally your help above did the trick, as >> Philo mentioned earlier. A boot disk from that site has all the >> needed > >> files on one disk, no install is necessary, which helped in this >> case. Everything worked fine, fdisk, format, boots up to a DOS 6.22 C > prompt. >> No W95 mention at all. It is finally a true DOS machine. >> Now, one minor glitch, each bootup it asks for confirm date and time, >> maybe thats a DOS default to live with. > > Create a "c:\autoexec.bat" file. It can be empty or one that > actually does something. > > Ben > Thanks, will do that. Somethings not quite normal, yet. I want to install DOS 6,22, my disks say with disk #1 inserted, reboot and setup will start, it did yesterday at some point, but today on reboot it says "Invalid system disk, replace disk....." Would have thought that would go OK. My 6.22 disks are IIRC, the MS DOS version. Guess a question is: how to install, maybe copy files to C with a real directory this time, run it from C, although that may not work with this. ms
Guest philo Posted December 17, 2007 Posted December 17, 2007 Re: DOS question > > > Thanks, will do that. > > Somethings not quite normal, yet. > > I want to install DOS 6,22, my disks say with disk #1 inserted, reboot > and setup will start, it did yesterday at some point, but today on reboot > it says "Invalid system disk, replace disk....." > > Would have thought that would go OK. My 6.22 disks are IIRC, the MS DOS > version. > > Guess a question is: how to install, maybe copy files to C with a real > directory this time, run it from C, although that may not work with this. > > ms Did you leave a floppy in the drive? If so remove it. otherwise just boot with an msdos boot floppy from the same version as is on the machine then issue the command sys C:
Guest ms Posted December 17, 2007 Posted December 17, 2007 Re: DOS question "philo" <philo@privacy.net> wrote in news:uOanwXPQIHA.3388@TK2MSFTNGP03.phx.gbl: > > >> > >> Thanks, will do that. >> >> Somethings not quite normal, yet. >> >> I want to install DOS 6,22, my disks say with disk #1 inserted, >> reboot and setup will start, it did yesterday at some point, but >> today on reboot it says "Invalid system disk, replace disk....." >> >> Would have thought that would go OK. My 6.22 disks are IIRC, the MS >> DOS version. >> >> Guess a question is: how to install, maybe copy files to C with a >> real directory this time, run it from C, although that may not work >> with this. >> >> ms > > > Did you leave a floppy in the drive? > > If so remove it. > > otherwise just boot with an msdos boot floppy from the same version as > is on the machine > then issue the command sys C: > Did that awhile ago. The system files must already be there as w/o boot disk it boots fine to C prompt. And command.com is in C root. ms
Guest philo Posted December 17, 2007 Posted December 17, 2007 Re: DOS question >> >> >> Did you leave a floppy in the drive? >> >> If so remove it. >> >> otherwise just boot with an msdos boot floppy from the same version as >> is on the machine >> then issue the command sys C: >> > Did that awhile ago. The system files must already be there as w/o boot > disk it boots fine to C prompt. And command.com is in C root. > > ms yep that's what's supposed to happen
Guest ms Posted December 18, 2007 Posted December 18, 2007 Re: DOS question ms <ms@invalid.com> wrote in news:5so4j4F1acjvbU1@mid.individual.net: > "Ben Myers" <benjmyers@mindR-e-m-o-v-Espring.com> wrote in > news:#Ps6pTOQIHA.6036@TK2MSFTNGP03.phx.gbl: > >> "ms" <ms@invalid.com> wrote in message >> news:5snvrhF19ircnU2@mid.individual.net... >>> "Ben Myers" <benjmyers@mindR-e-m-o-v-Espring.com> wrote in >>> news:enWyucNQIHA.2376@TK2MSFTNGP02.phx.gbl: >>> Ben, thanks, you are always helpful. >>> Having tried other things, finally your help above did the trick, as >>> Philo mentioned earlier. A boot disk from that site has all the >>> needed >> >>> files on one disk, no install is necessary, which helped in this >>> case. Everything worked fine, fdisk, format, boots up to a DOS 6.22 >>> C >> prompt. >>> No W95 mention at all. It is finally a true DOS machine. >>> Now, one minor glitch, each bootup it asks for confirm date and >>> time, maybe thats a DOS default to live with. >> >> Create a "c:\autoexec.bat" file. It can be empty or one that >> actually does something. >> >> Ben >> > Thanks, will do that. > > Somethings not quite normal, yet. > > I want to install DOS 6,22, my disks say with disk #1 inserted, reboot > and setup will start, it did yesterday at some point, but today on > reboot it says "Invalid system disk, replace disk....." > > Would have thought that would go OK. My 6.22 disks are IIRC, the MS > DOS version. > > Guess a question is: how to install, maybe copy files to C with a real > directory this time, run it from C, although that may not work with > this. > > ms Hope someone has ideas on this. I just did a search for DOS newsgroups, I found very few with any activity, even alt.dos.batch has only about 5 posts in the past month. ms
Guest ... et al. Posted December 18, 2007 Posted December 18, 2007 Re: DOS question Don Phillipson wrote: > 1. From this prompt, do > DIR D*.* > This will generate a directory of all files and > folders beginning with D > but only in the folder where you are currently > logged. To be sure you are in the root directory > do a couple of times > CD.. > that is C D dot dot (with no spaces) Except when i mistype i always separate Attributes and Switches from the Command by a space! But wow! Booted in to Win98SE's 'Command Prompt only' and tested this and it works without any spaces. Wow again. > DOS is "unforgiving" in that every keystroke > must be correct. Kinda not in this case (at least DOS under Win98SE). 'CD ..' or 'CD..' -> both backs up the path one level. My DOS 5 reference indicate a space, but 'CD /?' suggests your lingo. 'CD/?' works as well .. LOL. -- Nah-ah. I'm staying out of this. ... Now, here's my opinion. Please followup in the newsgroup. E-mail address is invalid due to spam-control.
Recommended Posts