Jump to content

Recommended Posts

Posted (edited)

I have a HP Pavilion DV9000 Lap Top that has a booting problem. When I press power, the lights on the key board comes on for a few seconds then flashes off and on multiple times until I turn off the power.

 

Other times while booting it will going throw files and will stop on

!! Oxcolaold!! 28492/92571 (Registry\Machine\Components\Derived Data-).

 

Also some times the lap top will try to fix the booting problem but with no prevail. I tried using the System Startup Repair, System Restore and Windows Memory Diagnostic Tool which found no problem with the memory. I even tried using the XP CD and the Startup Repair say "Windows Cannot repair this computer automatically".

 

What else can I try to solve this problem?

Edited by dreadprinz
  • Replies 13
  • Created
  • Last Reply

Top Posters In This Topic

Posted

Hello and welcome.

 

That code is not l its 1s.

 

0xc01a001d 9841/94009 (\Registry\Machine\COMPONENTS\Derived\Data...)

 

Do you know what service pack you have installed or were you installing a SP?

 

It looks possibly you need to reinstall Vista.

Rwy'n ceisio fy ngorau......................
Posted (edited)
Hello and welcome.

 

That code is not l its 1s.

 

0xc01a001d 9841/94009 (\Registry\Machine\COMPONENTS\Derived\Data...)

 

Do you know what service pack you have installed or were you installing a SP?

 

It looks possibly you need to reinstall Vista.

 

 

 

 

Hi,

 

I was installing Service Pack 2, but the lap top had booting problems before I tried installing the service pack. Just that the problems got worst after the lap top tried to reboot to finish the installation of the service pack. Thats when the code came up on the screen.

 

My question is, if I reinstall Vista will I lose all my files?

Edited by dreadprinz
Posted

No your files will be intact.

 

The way to do this only is to use the reinstall disk if you have one.

 

If you use recovery console then all will be lost.

 

You use the install disk and do NOT delete the partition just go ahead and install.

 

Then once up and running open C drive and you will see located "windows.old" this contains all your files.

Rwy'n ceisio fy ngorau......................
Posted
No your files will be intact.

 

The way to do this only is to use the reinstall disk if you have one.

 

If you use recovery console then all will be lost.

 

You use the install disk and do NOT delete the partition just go ahead and install.

 

Then once up and running open C drive and you will see located "windows.old" this contains all your files.

 

 

 

Hi,

 

I am trying to reinstall Vista. But on the Which type of installation do you want page, Upgrade option is disabled. It is saying Upgrade has be disabled.

 

What can do to enable the Upgrade Option.

Posted

I'm confused here.

I even tried using the XP CD.

Your profile says you have XP.

You posted in the Vista section.

 

What version of Windows did you have when you bought it as you seem to be using an XP installation disk and are trying to do a Vista upgrade installation.

 

I'm just wondering if you need to reinstall XP then need to run a Vista upgrade disk.

We are all members helping other members. Please return here where you may be able to help someone else. After all, no one knows everything and you may have the answer that someone needs.

Get help with computer problems. Join Free PC Help here

 

Donations are welcome. Read Here

Posted
I'm confused here.

Your profile says you have XP.

You posted in the Vista section.

 

What version of Windows did you have when you bought it as you seem to be using an XP installation disk and are trying to do a Vista upgrade installation.

 

I'm just wondering if you need to reinstall XP then need to run a Vista upgrade disk.

 

 

 

Sorry I made a mistake,

What I meant to say was Vista CD. I have two computers, a desk top which runs XP and a lap top that has Vista. My profile says XP because I am more familiar with XP but my lap top which has the booting problem runs Vista.

I am trying to reinstall Vista on the lap (which came with Vista). But on the Which type of installation do you want page, Upgrade option is disabled. It is saying Upgrade has been disabled.

 

What can I do to enable the Upgrade Option?

Posted

If Vista is already installed on the laptop just choose install and do NOT delete the partition just install.

 

Upgrade is used within windows.

Rwy'n ceisio fy ngorau......................
Posted (edited)
If Vista is already installed on the laptop just choose install and do NOT delete the partition just install.

 

Upgrade is used within windows.

 

 

 

Thanks for your help. I reinstalled Vista and all my files are there. But I am still having booting problem. Most times when I press power I also have to press F1 for the computer to boot. Twice it stopped during booting on a screen with blue lines.

 

After boot up the laptop will work great, except for the wireless card, it just doesn’t work. I remove the wireless card and I also checked the memory chips to make sure they where not loss and still no improvement.

 

Do you have any other ideas?

Edited by dreadprinz
Posted

Have a look back at the link I gave you in Post No 3.

 

Complete or partial wireless failure is another symptom of a failing DV9000.

 

Add these problems

 

But I am still having booting problem. Most times when I press power I also have to press F1 for the computer to boot. Twice it stopped during booting on a screen with blue lines.

 

Also, have a look at these links

 

HP dv9000 wireless not working

 

Forums - Recurring failure in HP DV9000 laptop - PC Advisor

 

Hp admits wireless laptop problems - The Inquirer

 

HP Pavillian dv9000 (and others) Overheating Damage/ Motherboard Failure - WORLD Law Direct Forums

 

Its a common fault and in some cases a BIOS update wlll fix it, but in alot of cases it won't - it is a design fault.

 

Can you post the exact model number eg DV9010ea, and the product number eg RE372EA, and tell us if it is an Intel or AMD model.

 

Thanks.

Posted

 

Can you post the exact model number eg DV9010ea, and the product number eg RE372EA, and tell us if it is an Intel or AMD model.

 

Thanks.

 

 

Thanks for the information. The model/series number DV9420US and the product number GA354UA#ABA. Also it is a AMD model.

Posted (edited)

The AMD models run hotter than the Intel ones, and you may find that if you were to look closely at the lid/hinge assembly inside they are beginning to fail too - its even more common than the other faults.

 

Ok, your model does indeed come under the HP Service Warranty, to quote

 

[ATTACH]580[/ATTACH]

 

Go to this link, which shows your model number

 

HP Limited Warranty Service Enhancement (Product Numbers Included)*

 

Then to here

 

HP Limited Warranty Service Enhancement*

 

Confirm the problems you are having and contact HP.

Edited by Tootech
Posted (edited)

Ok, your model does indeed come under the HP Service Warranty, to quote

 

Confirm the problems you are having and contact HP.

 

 

 

Thanks to all that helped me.

 

I used the links and I confirm that the laptop is having the same problems stated on the HP web site. So I call HP and indeed I fall under the Service Warranty. They told me that I should receive a box in the mail in two to three business days so I can send it in for repairs. All repairs should take about 10 to 14 business days.

 

My question is, has HP solved the problems with these laptop or are they just replacing bad motherboards with new faulty boards?

Edited by dreadprinz

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...