Jump to content

Recommended Posts

Posted

Hi All

hve tried to upgrade from a P4 2.4 to a 3.06 ( my motherboard supports this Asus p4s8x-x ) installed the chip ( brought used on ebay ) and all i get is a wee- wooa s warning sound , no boot up or screen , one friend suf=geested the lates bios from Asus , but that frankly scares me !!!

and ideas please

thanking you all in advance

Bryan

  • Replies 1
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted

your friend could be right..

the latest bios for your board is here http://support.asus.com/cpusupport/cpusupport.aspx?SLanguage=en-us&model=P4S8X-X

read how to flash the bios then read again just to make sure....

flashing the bios is not hard at all...i can see it being a little scary i was scared when i did my first.

if i can help you or guide you through it let me know....

asus may use a flash bios utilty that is ran from within windows..these are the easiest.

kind regards

danzil

Windows 10 Pro x64

Aqua Jeantech Gaming case

550watt psu.

MSI Gaming Board

32GB DDR3 Corsair gaming Ram

Genuine Intel i7 3.2Ghz

4 x 24x dvdrw

150GB SSD

750GB Hybrid Drive

256 RAID PCI/E SSD for OS

and loads of other bits i really dont need :D

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...