Jump to content

Video Card Problem


Recommended Posts

Guest jak163@gmail.com
Posted

Hi. I installed a Nvidia GeForce 6200 256MB DDR Low Profile Dual DVI

& VGA (PCI) card on a Kadoka motherboard BIOS upgraded to 0AASNP06.

Computer is running Windows 98SE on an AMD-700 K6-III processor with

512MB of RAM.

 

The system hangs when I shut down with a blinking cursor. If I try to

restart in MS-DOS mode, it gives me a DOS screen with Windows

Protection Error, You Need to Restart Your Computer, and any key will

shut it down, although the state when I restart will not remember any

changes.

 

Gateway will not give tech support as this is third party (although

they recommended checking the power supply, but it's 350W so it's more

than they specified). Jaton, who sold me the card, suggested

upgrading the BIOS, which I did to no avail.

 

Any suggestions would be welcome.

  • Replies 4
  • Created
  • Last Reply
Guest Franc Zabkar
Posted

Re: Video Card Problem

 

On Thu, 3 Jan 2008 08:23:02 -0800 (PST), jak163@gmail.com put finger

to keyboard and composed:

>Hi. I installed a Nvidia GeForce 6200 256MB DDR Low Profile Dual DVI

>& VGA (PCI) card on a Kadoka motherboard BIOS upgraded to 0AASNP06.

>Computer is running Windows 98SE on an AMD-700 K6-III processor with

>512MB of RAM.

>

>The system hangs when I shut down with a blinking cursor. If I try to

>restart in MS-DOS mode, it gives me a DOS screen with Windows

>Protection Error, You Need to Restart Your Computer, and any key will

>shut it down, although the state when I restart will not remember any

>changes.

>

>Gateway will not give tech support as this is third party (although

>they recommended checking the power supply, but it's 350W so it's more

>than they specified). Jaton, who sold me the card, suggested

>upgrading the BIOS, which I did to no avail.

>

>Any suggestions would be welcome.

 

Try turning off video caching in your BIOS/CMOS setup. This was a

problem for me on two machines.

 

- Franc Zabkar

--

Please remove one 'i' from my address when replying by email.

Guest Peter Keller
Posted

Re: Video Card Problem

 

Franc Zabkar wrote:

> On Thu, 3 Jan 2008 08:23:02 -0800 (PST), jak163@gmail.com put finger

> to keyboard and composed:

>

>> Hi. I installed a Nvidia GeForce 6200 256MB DDR Low Profile Dual DVI

>> & VGA (PCI) card on a Kadoka motherboard BIOS upgraded to 0AASNP06.

>> Computer is running Windows 98SE on an AMD-700 K6-III processor with

>> 512MB of RAM.

>>

>> The system hangs when I shut down with a blinking cursor. If I try to

>> restart in MS-DOS mode, it gives me a DOS screen with Windows

>> Protection Error, You Need to Restart Your Computer, and any key will

>> shut it down, although the state when I restart will not remember any

>> changes.

>>

>> Gateway will not give tech support as this is third party (although

>> they recommended checking the power supply, but it's 350W so it's more

>> than they specified). Jaton, who sold me the card, suggested

>> upgrading the BIOS, which I did to no avail.

>>

>> Any suggestions would be welcome.

>

> Try turning off video caching in your BIOS/CMOS setup. This was a

> problem for me on two machines.

>

> - Franc Zabkar

What driver are you using? I'll bet it's version 81.98. Revert to

version 77.72

and your troubles will cease. You can get them here:

http://www.nvidia.com/object/win9x_77.72.html.

Guest Franc Zabkar
Posted

Re: Video Card Problem

 

On Thu, 03 Jan 2008 20:13:35 -0500, Peter Keller

<petekeller@comcast.net> put finger to keyboard and composed:

>Franc Zabkar wrote:

>> On Thu, 3 Jan 2008 08:23:02 -0800 (PST), jak163@gmail.com put finger

>> to keyboard and composed:

>>

>>> Hi. I installed a Nvidia GeForce 6200 256MB DDR Low Profile Dual DVI

>>> & VGA (PCI) card on a Kadoka motherboard BIOS upgraded to 0AASNP06.

>>> Computer is running Windows 98SE on an AMD-700 K6-III processor with

>>> 512MB of RAM.

>>>

>>> The system hangs when I shut down with a blinking cursor. If I try to

>>> restart in MS-DOS mode, it gives me a DOS screen with Windows

>>> Protection Error, You Need to Restart Your Computer, and any key will

>>> shut it down, although the state when I restart will not remember any

>>> changes.

>>>

>>> Gateway will not give tech support as this is third party (although

>>> they recommended checking the power supply, but it's 350W so it's more

>>> than they specified). Jaton, who sold me the card, suggested

>>> upgrading the BIOS, which I did to no avail.

>>>

>>> Any suggestions would be welcome.

>>

>> Try turning off video caching in your BIOS/CMOS setup. This was a

>> problem for me on two machines.

>>

>> - Franc Zabkar

>What driver are you using? I'll bet it's version 81.98. Revert to

>version 77.72

>and your troubles will cease. You can get them here:

>http://www.nvidia.com/object/win9x_77.72.html.

 

Sorry, I'm not using the OP's video card. I had shutdown issues with

two older "generic" cards until I turned off caching in the BIOS. I

believe that there is a potential problem when Windows switches from

protected mode back to real mode just before shutting down.

 

- Franc Zabkar

--

Please remove one 'i' from my address when replying by email.

Guest jak163
Posted

Re: Video Card Problem

 

On Jan 4, 2:15 am, Franc Zabkar <fzab...@iinternode.on.net> wrote:

> On Thu, 03 Jan 2008 20:13:35 -0500, Peter Keller

> <petekel...@comcast.net> put finger to keyboard and composed:

>

>

>

> >Franc Zabkar wrote:

> >> On Thu, 3 Jan 2008 08:23:02 -0800 (PST), jak...@gmail.com put finger

> >> to keyboard and composed:

>

> >>> Hi. I installed a Nvidia GeForce 6200 256MB DDR Low Profile Dual DVI

> >>> & VGA (PCI) card on a Kadoka motherboard BIOS upgraded to 0AASNP06.

> >>> Computer is running Windows 98SE on an AMD-700 K6-III processor with

> >>> 512MB of RAM.

>

> >>> The system hangs when I shut down with a blinking cursor. If I try to

> >>> restart in MS-DOS mode, it gives me a DOS screen with Windows

> >>> Protection Error, You Need to Restart Your Computer, and any key will

> >>> shut it down, although the state when I restart will not remember any

> >>> changes.

>

> >>> Gateway will not give tech support as this is third party (although

> >>> they recommended checking the power supply, but it's 350W so it's more

> >>> than they specified). Jaton, who sold me the card, suggested

> >>> upgrading the BIOS, which I did to no avail.

>

> >>> Any suggestions would be welcome.

>

> >> Try turning off video caching in your BIOS/CMOS setup. This was a

> >> problem for me on two machines.

>

> >> - Franc Zabkar

> >What driver are you using? I'll bet it's version 81.98. Revert to

> >version 77.72

> >and your troubles will cease. You can get them here:

> >http://www.nvidia.com/object/win9x_77.72.html.

>

> Sorry, I'm not using the OP's video card. I had shutdown issues with

> two older "generic" cards until I turned off caching in the BIOS. I

> believe that there is a potential problem when Windows switches from

> protected mode back to real mode just before shutting down.

>

> - Franc Zabkar

> --

> Please remove one 'i' from my address when replying by email.

 

Thank you very much for your suggestions. I was indeed using version

81.98 of the driver, and I reverted to 77.72 using the link suggested

and it worked! Thanks very much.

 

There is no option relating to video in the BIOS for some reason.

Gateway and Jaton both suggested making changes to this as well, but

there's no way to do it that I can see.


×
×
  • Create New...