Guest T_A_C Posted January 10, 2008 Posted January 10, 2008 I've been using NTbackup for a couple years now, as follows: File server (which has the VS80 tape drive, backs itself and also the backup files from the Exchange server, nightly. The Exchange server backs up the Ex storage group to a file and the systems state to a file, then the file server pulls those two files down to tape each night. This process has worked flawlessly until lately. Now I get the message in my NTbackup logs as follows: Backup started on 1/10/2008 at 12:03 AM. WARNING: Portions of "\Exchange.bkf" cannot be read. The backed up data is corrupt or incomplete. This file will not restore correctly. Backup completed on 1/10/2008 at 2:44 AM. Directories: 1 Files: 2 Corrupt: 1 Bytes: 43,685,847,664 Time: 2 hours, 41 minutes, and 41 seconds I verified that the NTbackup on the Exchange server is working with NO errors, so the Exchanged.bkf is a good file! however when the file server pulls it down to tape the log spits this error out. All other files (local and remote) gets backed up successfully (and verified), with the exception of the Exchange.bkf. I have Acronis making an image of the file server (vss enabled), nightly... however they are done at separate times (Acronis is done by 10:30pm, NTbackup starts at 12 midnight). I've deleted the existing Exchange file... (made no difference), made sure my imaging is not timed at same time... the Exchange.bfk is approx 43GB's in size.... at this point IM STUMPED!!??!
Guest T_A_C Posted January 10, 2008 Posted January 10, 2008 RE: NTbackup fail on one file only correction VS160 drive, and the exchange file is the first file to be backed up, all other files backup successfully afterwards. "T_A_C" wrote: > I've been using NTbackup for a couple years now, as follows: File server > (which has the VS80 tape drive, backs itself and also the backup files from > the Exchange server, nightly. The Exchange server backs up the Ex storage > group to a file and the systems state to a file, then the file server pulls > those two files down to tape each night. This process has worked flawlessly > until lately. > > Now I get the message in my NTbackup logs as follows: > > Backup started on 1/10/2008 at 12:03 AM. > WARNING: Portions of "\Exchange.bkf" cannot be read. The backed up data is > corrupt or incomplete. > This file will not restore correctly. > Backup completed on 1/10/2008 at 2:44 AM. > Directories: 1 > Files: 2 > Corrupt: 1 > Bytes: 43,685,847,664 > Time: 2 hours, 41 minutes, and 41 seconds > > I verified that the NTbackup on the Exchange server is working with NO > errors, so the Exchanged.bkf is a good file! however when the file server > pulls it down to tape the log spits this error out. All other files (local > and remote) gets backed up successfully (and verified), with the exception of > the Exchange.bkf. > > I have Acronis making an image of the file server (vss enabled), nightly... > however they are done at separate times (Acronis is done by 10:30pm, NTbackup > starts at 12 midnight). > > I've deleted the existing Exchange file... (made no difference), made sure > my imaging is not timed at same time... the Exchange.bfk is approx 43GB's in > size.... at this point IM STUMPED!!??!
Guest Pegasus \(MVP\) Posted January 10, 2008 Posted January 10, 2008 Re: NTbackup fail on one file only "T_A_C" <TAC@discussions.microsoft.com> wrote in message news:E343BCEC-8F28-4012-9CBC-9A4D354FEE10@microsoft.com... > I've been using NTbackup for a couple years now, as follows: File server > (which has the VS80 tape drive, backs itself and also the backup files > from > the Exchange server, nightly. The Exchange server backs up the Ex storage > group to a file and the systems state to a file, then the file server > pulls > those two files down to tape each night. This process has worked > flawlessly > until lately. > > Now I get the message in my NTbackup logs as follows: > > Backup started on 1/10/2008 at 12:03 AM. > WARNING: Portions of "\Exchange.bkf" cannot be read. The backed up data > is > corrupt or incomplete. > This file will not restore correctly. > Backup completed on 1/10/2008 at 2:44 AM. > Directories: 1 > Files: 2 > Corrupt: 1 > Bytes: 43,685,847,664 > Time: 2 hours, 41 minutes, and 41 seconds > > I verified that the NTbackup on the Exchange server is working with NO > errors, so the Exchanged.bkf is a good file! however when the file server > pulls it down to tape the log spits this error out. All other files > (local > and remote) gets backed up successfully (and verified), with the exception > of > the Exchange.bkf. > > I have Acronis making an image of the file server (vss enabled), > nightly... > however they are done at separate times (Acronis is done by 10:30pm, > NTbackup > starts at 12 midnight). > > I've deleted the existing Exchange file... (made no difference), made sure > my imaging is not timed at same time... the Exchange.bfk is approx 43GB's > in > size.... at this point IM STUMPED!!??! Maybe the process that generates the .bkf file hasn't finished by the time you're trying to pull it to tape. Have a look at the details in the corresponding backup log!
Guest T_A_C Posted January 10, 2008 Posted January 10, 2008 Re: NTbackup fail on one file only the backup verification on the Exchange server finishes at approx. 11:11pm, the file server doesn't access the bkf file until 11:55pm "Pegasus (MVP)" wrote: > > "T_A_C" <TAC@discussions.microsoft.com> wrote in message > news:E343BCEC-8F28-4012-9CBC-9A4D354FEE10@microsoft.com... > > I've been using NTbackup for a couple years now, as follows: File server > > (which has the VS80 tape drive, backs itself and also the backup files > > from > > the Exchange server, nightly. The Exchange server backs up the Ex storage > > group to a file and the systems state to a file, then the file server > > pulls > > those two files down to tape each night. This process has worked > > flawlessly > > until lately. > > > > Now I get the message in my NTbackup logs as follows: > > > > Backup started on 1/10/2008 at 12:03 AM. > > WARNING: Portions of "\Exchange.bkf" cannot be read. The backed up data > > is > > corrupt or incomplete. > > This file will not restore correctly. > > Backup completed on 1/10/2008 at 2:44 AM. > > Directories: 1 > > Files: 2 > > Corrupt: 1 > > Bytes: 43,685,847,664 > > Time: 2 hours, 41 minutes, and 41 seconds > > > > I verified that the NTbackup on the Exchange server is working with NO > > errors, so the Exchanged.bkf is a good file! however when the file server > > pulls it down to tape the log spits this error out. All other files > > (local > > and remote) gets backed up successfully (and verified), with the exception > > of > > the Exchange.bkf. > > > > I have Acronis making an image of the file server (vss enabled), > > nightly... > > however they are done at separate times (Acronis is done by 10:30pm, > > NTbackup > > starts at 12 midnight). > > > > I've deleted the existing Exchange file... (made no difference), made sure > > my imaging is not timed at same time... the Exchange.bfk is approx 43GB's > > in > > size.... at this point IM STUMPED!!??! > > Maybe the process that generates the .bkf file hasn't finished > by the time you're trying to pull it to tape. Have a look at the > details in the corresponding backup log! > > >
Guest T_A_C Posted January 10, 2008 Posted January 10, 2008 Re: NTbackup fail on one file only I did put all the servers on the same (new) switch the same day this started... I'll enable jumbo frames on it... perhaps that will make the difference since the files is 43GB+...??? "T_A_C" wrote: > the backup verification on the Exchange server finishes at approx. 11:11pm, > the file server doesn't access the bkf file until 11:55pm > > "Pegasus (MVP)" wrote: > > > > > "T_A_C" <TAC@discussions.microsoft.com> wrote in message > > news:E343BCEC-8F28-4012-9CBC-9A4D354FEE10@microsoft.com... > > > I've been using NTbackup for a couple years now, as follows: File server > > > (which has the VS80 tape drive, backs itself and also the backup files > > > from > > > the Exchange server, nightly. The Exchange server backs up the Ex storage > > > group to a file and the systems state to a file, then the file server > > > pulls > > > those two files down to tape each night. This process has worked > > > flawlessly > > > until lately. > > > > > > Now I get the message in my NTbackup logs as follows: > > > > > > Backup started on 1/10/2008 at 12:03 AM. > > > WARNING: Portions of "\Exchange.bkf" cannot be read. The backed up data > > > is > > > corrupt or incomplete. > > > This file will not restore correctly. > > > Backup completed on 1/10/2008 at 2:44 AM. > > > Directories: 1 > > > Files: 2 > > > Corrupt: 1 > > > Bytes: 43,685,847,664 > > > Time: 2 hours, 41 minutes, and 41 seconds > > > > > > I verified that the NTbackup on the Exchange server is working with NO > > > errors, so the Exchanged.bkf is a good file! however when the file server > > > pulls it down to tape the log spits this error out. All other files > > > (local > > > and remote) gets backed up successfully (and verified), with the exception > > > of > > > the Exchange.bkf. > > > > > > I have Acronis making an image of the file server (vss enabled), > > > nightly... > > > however they are done at separate times (Acronis is done by 10:30pm, > > > NTbackup > > > starts at 12 midnight). > > > > > > I've deleted the existing Exchange file... (made no difference), made sure > > > my imaging is not timed at same time... the Exchange.bfk is approx 43GB's > > > in > > > size.... at this point IM STUMPED!!??! > > > > Maybe the process that generates the .bkf file hasn't finished > > by the time you're trying to pull it to tape. Have a look at the > > details in the corresponding backup log! > > > > > >
Recommended Posts