Guest Jaison Posted January 18, 2008 Posted January 18, 2008 Hi All, I manage a Microsoft SBS 2003 server. I swapped out routers and since then when I attempt to connect to the server via Remote Desktop Connection, I can sign in, however, the connection will hang, it will start to paint the server desktop and then just stop. I click 'x' on the connection, it will exit out with no problem. All of the ports I normally open for Remote Desktop are open like 3389, 4125, etc. Any help would be appreciated, thanks! Hopefully this is the right group! Jaison
Guest Robert L. \(MS-MVP\) Posted January 18, 2008 Posted January 18, 2008 Re: Windows Server 2003 - Remote Desktop Hanging It could be MTU issue. These links may help. connection to remote computer was broken caused by network errorIf the Remote Desktop screen comes up black and then you receive this error, you may need test and modify the MTU. These links may help, ... http://www.chicagotech.net/Q&A/vpn54.htm The client could not connect to the remote computerAfter lowering the MTU value to 1200 for both Protocol and Tunnel I get immediate connection of the Remote Desktop session. :-) Thanks for the tip! ... http://www.chicagotech.net/remoteissues/rdc2.htm -- Bob Lin, MS-MVP, MCSE & CNE Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com "Jaison" <jstein1206@gmail.com> wrote in message news:efFJUZeWIHA.4532@TK2MSFTNGP02.phx.gbl... > Hi All, > > I manage a Microsoft SBS 2003 server. I swapped out routers and since > then when I attempt to connect to the server via Remote Desktop > Connection, I can sign in, however, the connection will hang, it will > start to paint the server desktop and then just stop. I click 'x' on the > connection, it will exit out with no problem. All of the ports I normally > open for Remote Desktop are open like 3389, 4125, etc. > > Any help would be appreciated, thanks! > > Hopefully this is the right group! > > Jaison
Guest Jaison Posted January 18, 2008 Posted January 18, 2008 Re: Windows Server 2003 - Remote Desktop Hanging Thanks, I think I got it!! "Robert L. (MS-MVP)" <blinNoEmailplease@mvps.org> wrote in message news:OgE2xueWIHA.6140@TK2MSFTNGP02.phx.gbl... > It could be MTU issue. These links may help. > > connection to remote computer was broken caused by network errorIf the > Remote Desktop screen comes up black and then you receive this error, you > may need test and modify the MTU. These links may help, ... > http://www.chicagotech.net/Q&A/vpn54.htm > > The client could not connect to the remote computerAfter lowering the > MTU value to 1200 for both Protocol and Tunnel I get immediate connection > of the Remote Desktop session. :-) Thanks for the tip! ... > http://www.chicagotech.net/remoteissues/rdc2.htm > > > > -- > Bob Lin, MS-MVP, MCSE & CNE > Networking, Internet, Routing, VPN Troubleshooting on > http://www.ChicagoTech.net > How to Setup Windows, Network, VPN & Remote Access on > http://www.HowToNetworking.com > > > "Jaison" <jstein1206@gmail.com> wrote in message > news:efFJUZeWIHA.4532@TK2MSFTNGP02.phx.gbl... >> Hi All, >> >> I manage a Microsoft SBS 2003 server. I swapped out routers and since >> then when I attempt to connect to the server via Remote Desktop >> Connection, I can sign in, however, the connection will hang, it will >> start to paint the server desktop and then just stop. I click 'x' on the >> connection, it will exit out with no problem. All of the ports I >> normally open for Remote Desktop are open like 3389, 4125, etc. >> >> Any help would be appreciated, thanks! >> >> Hopefully this is the right group! >> >> Jaison >
Guest Robert L. \(MS-MVP\) Posted January 18, 2008 Posted January 18, 2008 Re: Windows Server 2003 - Remote Desktop Hanging Thank you for the feedback. -- Bob Lin, MS-MVP, MCSE & CNE Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com "Jaison" <jstein1206@gmail.com> wrote in message news:OaK759eWIHA.4896@TK2MSFTNGP06.phx.gbl... > Thanks, I think I got it!! > > "Robert L. (MS-MVP)" <blinNoEmailplease@mvps.org> wrote in message > news:OgE2xueWIHA.6140@TK2MSFTNGP02.phx.gbl... >> It could be MTU issue. These links may help. >> >> connection to remote computer was broken caused by network errorIf the >> Remote Desktop screen comes up black and then you receive this error, you >> may need test and modify the MTU. These links may help, ... >> http://www.chicagotech.net/Q&A/vpn54.htm >> >> The client could not connect to the remote computerAfter lowering >> the MTU value to 1200 for both Protocol and Tunnel I get immediate >> connection of the Remote Desktop session. :-) Thanks for the tip! ... >> http://www.chicagotech.net/remoteissues/rdc2.htm >> >> >> >> -- >> Bob Lin, MS-MVP, MCSE & CNE >> Networking, Internet, Routing, VPN Troubleshooting on >> http://www.ChicagoTech.net >> How to Setup Windows, Network, VPN & Remote Access on >> http://www.HowToNetworking.com >> >> >> "Jaison" <jstein1206@gmail.com> wrote in message >> news:efFJUZeWIHA.4532@TK2MSFTNGP02.phx.gbl... >>> Hi All, >>> >>> I manage a Microsoft SBS 2003 server. I swapped out routers and since >>> then when I attempt to connect to the server via Remote Desktop >>> Connection, I can sign in, however, the connection will hang, it will >>> start to paint the server desktop and then just stop. I click 'x' on >>> the connection, it will exit out with no problem. All of the ports I >>> normally open for Remote Desktop are open like 3389, 4125, etc. >>> >>> Any help would be appreciated, thanks! >>> >>> Hopefully this is the right group! >>> >>> Jaison >> >
Recommended Posts