Adding new 2003 R2 Domain controllers to existing Server 2003 domain

[Guest Jim]

Hello, I have a Server 2003 domain and need to upgrade the hardware of 2 of

my domain controllers. I thought this would be a good time to move to

Server 2003 R2.

 

I wanted to do a sanity check on the process and make sure there are no

gotcha's that I've not yet read about.

 

I've built the hardware and installed Server 2003 R2 and understand that the

next step is to run the forest prep. I've got good tape backups of the

domain controllers and individual system state backups of each as well.

 

Would there be any other best practices that I should do from a disaster

standpoint in case the forest prep goes south and I need to restore?

 

Or is this upgrade so minor that I'm worrying too much?

 

Any guidance would be appreciated.

 

Thanks

Jim

[Guest Danny Sanders]

Re: Adding new 2003 R2 Domain controllers to existing Server 2003 domain

 

R2 is Win 2k3 SP2 with feature upgrades. You would run adprep on the schema

master for your domain, then install the updated R2 features on the servers

you want to use the updated features on by installing the second disk of the

R2 set on those servers. If you are not going to use the updated features,

there is no need to install the second disk. By only using the first disk

you will have a Win 2k3 SP 2 server ready to go. At any point later you can

add the R2 updated features on this server by running setup2 from the second

disk of the R2 set.

 

FYI I've never see anyone in these news groups that said the schema update

went belly up. But good backups is a good Idea.

 

 

hth

DDS

 

"Jim" <jj@nospam.com> wrote in message

news:%23Vr%23IYLdIHA.4312@TK2MSFTNGP03.phx.gbl...

> Hello, I have a Server 2003 domain and need to upgrade the hardware of 2

> of my domain controllers. I thought this would be a good time to move to

> Server 2003 R2.

>

> I wanted to do a sanity check on the process and make sure there are no

> gotcha's that I've not yet read about.

>

> I've built the hardware and installed Server 2003 R2 and understand that

> the next step is to run the forest prep. I've got good tape backups of

> the domain controllers and individual system state backups of each as

> well.

>

> Would there be any other best practices that I should do from a disaster

> standpoint in case the forest prep goes south and I need to restore?

>

> Or is this upgrade so minor that I'm worrying too much?

>

> Any guidance would be appreciated.

>

> Thanks

> Jim

>

[Guest Jim]

Re: Adding new 2003 R2 Domain controllers to existing Server 2003 domain

 

Danny, All my server are Server 2003 SP2 already so are you saying that I

just have to run the second disk and then they are full R2 machines?

 

One of the main reasons I want to have R2 is the ability to establish quotas

on individual folders to limit the amount a user can put there.

Can I just install the second disk on the member server that I want to have

the quota's on and not upgrade the domain controllers to R2?

 

Thanks!

 

Jim

 

 

 

 

"Danny Sanders" <DSanders@NOSPAMciber.com> wrote in message

news:%232SesdLdIHA.3736@TK2MSFTNGP04.phx.gbl...

> R2 is Win 2k3 SP2 with feature upgrades. You would run adprep on the

> schema master for your domain, then install the updated R2 features on the

> servers you want to use the updated features on by installing the second

> disk of the R2 set on those servers. If you are not going to use the

> updated features, there is no need to install the second disk. By only

> using the first disk you will have a Win 2k3 SP 2 server ready to go. At

> any point later you can add the R2 updated features on this server by

> running setup2 from the second disk of the R2 set.

>

> FYI I've never see anyone in these news groups that said the schema update

> went belly up. But good backups is a good Idea.

>

>

> hth

> DDS

>

> "Jim" <jj@nospam.com> wrote in message

> news:%23Vr%23IYLdIHA.4312@TK2MSFTNGP03.phx.gbl...

>> Hello, I have a Server 2003 domain and need to upgrade the hardware of 2

>> of my domain controllers. I thought this would be a good time to move to

>> Server 2003 R2.

>>

>> I wanted to do a sanity check on the process and make sure there are no

>> gotcha's that I've not yet read about.

>>

>> I've built the hardware and installed Server 2003 R2 and understand that

>> the next step is to run the forest prep. I've got good tape backups of

>> the domain controllers and individual system state backups of each as

>> well.

>>

>> Would there be any other best practices that I should do from a disaster

>> standpoint in case the forest prep goes south and I need to restore?

>>

>> Or is this upgrade so minor that I'm worrying too much?

>>

>> Any guidance would be appreciated.

>>

>> Thanks

>> Jim

>>

>

>

[Guest Danny Sanders]

Re: Adding new 2003 R2 Domain controllers to existing Server 2003 domain

 

You will still need to run adprep on the schema master for your domain.

After that if the server is Win 2k3 SP 2 all you need to do is run setup 2

from the second disk of the R2 set to add the new features you want to use

to the server you want to use the new features on.

 

The schema master for your domain is on one of your DCs. This is the one you

run adprep on. If you are going to only use the new features on member

servers then you don't need to touch the DCs again.

 

hth

DDS

 

 

"Jim" <jj@nospam.com> wrote in message

news:%23hPRHTMdIHA.3400@TK2MSFTNGP03.phx.gbl...

> Danny, All my server are Server 2003 SP2 already so are you saying that I

> just have to run the second disk and then they are full R2 machines?

>

> One of the main reasons I want to have R2 is the ability to establish

> quotas on individual folders to limit the amount a user can put there.

> Can I just install the second disk on the member server that I want to

> have the quota's on and not upgrade the domain controllers to R2?

>

> Thanks!

>

> Jim

>

>

>

>

> "Danny Sanders" <DSanders@NOSPAMciber.com> wrote in message

> news:%232SesdLdIHA.3736@TK2MSFTNGP04.phx.gbl...

>> R2 is Win 2k3 SP2 with feature upgrades. You would run adprep on the

>> schema master for your domain, then install the updated R2 features on

>> the servers you want to use the updated features on by installing the

>> second disk of the R2 set on those servers. If you are not going to use

>> the updated features, there is no need to install the second disk. By

>> only using the first disk you will have a Win 2k3 SP 2 server ready to

>> go. At any point later you can add the R2 updated features on this server

>> by running setup2 from the second disk of the R2 set.

>>

>> FYI I've never see anyone in these news groups that said the schema

>> update went belly up. But good backups is a good Idea.

>>

>>

>> hth

>> DDS

>>

>> "Jim" <jj@nospam.com> wrote in message

>> news:%23Vr%23IYLdIHA.4312@TK2MSFTNGP03.phx.gbl...

>>> Hello, I have a Server 2003 domain and need to upgrade the hardware of 2

>>> of my domain controllers. I thought this would be a good time to move

>>> to Server 2003 R2.

>>>

>>> I wanted to do a sanity check on the process and make sure there are no

>>> gotcha's that I've not yet read about.

>>>

>>> I've built the hardware and installed Server 2003 R2 and understand that

>>> the next step is to run the forest prep. I've got good tape backups of

>>> the domain controllers and individual system state backups of each as

>>> well.

>>>

>>> Would there be any other best practices that I should do from a disaster

>>> standpoint in case the forest prep goes south and I need to restore?

>>>

>>> Or is this upgrade so minor that I'm worrying too much?

>>>

>>> Any guidance would be appreciated.

>>>

>>> Thanks

>>> Jim

>>>

>>

>>

>

[Guest Baboon]

Re: Adding new 2003 R2 Domain controllers to existing Server 2003

 

Re: Adding new 2003 R2 Domain controllers to existing Server 2003

 

I don't think this is going to be a problem, but one correction: W2K3 R2

came out with SP1 slipstreamed, not SP2. That said, I imagine you can also

buy W2K3 R2 with SP2 slipstreamed at this point.

 

I am sure you can use disk 2 to install the R2 components on a SP2

installation anyway. You do have the product key for R2, correct? You will

be prompted if your server was installed from pre-R2 W2K3 media.

 

"Jim" wrote:

> Danny, All my server are Server 2003 SP2 already so are you saying that I

> just have to run the second disk and then they are full R2 machines?

>

> One of the main reasons I want to have R2 is the ability to establish quotas

> on individual folders to limit the amount a user can put there.

> Can I just install the second disk on the member server that I want to have

> the quota's on and not upgrade the domain controllers to R2?

>

> Thanks!

>

> Jim

>

>

>

>

> "Danny Sanders" <DSanders@NOSPAMciber.com> wrote in message

> news:%232SesdLdIHA.3736@TK2MSFTNGP04.phx.gbl...

> > R2 is Win 2k3 SP2 with feature upgrades. You would run adprep on the

> > schema master for your domain, then install the updated R2 features on the

> > servers you want to use the updated features on by installing the second

> > disk of the R2 set on those servers. If you are not going to use the

> > updated features, there is no need to install the second disk. By only

> > using the first disk you will have a Win 2k3 SP 2 server ready to go. At

> > any point later you can add the R2 updated features on this server by

> > running setup2 from the second disk of the R2 set.

> >

> > FYI I've never see anyone in these news groups that said the schema update

> > went belly up. But good backups is a good Idea.

> >

> >

> > hth

> > DDS

> >

> > "Jim" <jj@nospam.com> wrote in message

> > news:%23Vr%23IYLdIHA.4312@TK2MSFTNGP03.phx.gbl...

> >> Hello, I have a Server 2003 domain and need to upgrade the hardware of 2

> >> of my domain controllers. I thought this would be a good time to move to

> >> Server 2003 R2.

> >>

> >> I wanted to do a sanity check on the process and make sure there are no

> >> gotcha's that I've not yet read about.

> >>

> >> I've built the hardware and installed Server 2003 R2 and understand that

> >> the next step is to run the forest prep. I've got good tape backups of

> >> the domain controllers and individual system state backups of each as

> >> well.

> >>

> >> Would there be any other best practices that I should do from a disaster

> >> standpoint in case the forest prep goes south and I need to restore?

> >>

> >> Or is this upgrade so minor that I'm worrying too much?

> >>

> >> Any guidance would be appreciated.

> >>

> >> Thanks

> >> Jim

> >>

> >

> >

>

>

[Guest Danny Sanders]

Re: Adding new 2003 R2 Domain controllers to existing Server 2003

 

Re: Adding new 2003 R2 Domain controllers to existing Server 2003

 

> I am sure you can use disk 2 to install the R2 components on a SP2

> installation anyway.

 

Actually no you can't. If you have Win 2k SP1 R2 disks it can only be

installed on a Win 2k3 server with SP 1.

If you have Win 2k3 SP2 R2 disks you will have to install SP 2 on the server

before it will work.

 

hth

DDS

 

"Baboon" <baboon@news.postalias> wrote in message

news:7FF5FD9A-2E6A-4B82-A594-9E89321DAB23@microsoft.com...

>I don't think this is going to be a problem, but one correction: W2K3 R2

> came out with SP1 slipstreamed, not SP2. That said, I imagine you can

> also

> buy W2K3 R2 with SP2 slipstreamed at this point.

>

> I am sure you can use disk 2 to install the R2 components on a SP2

> installation anyway. You do have the product key for R2, correct? You

> will

> be prompted if your server was installed from pre-R2 W2K3 media.

>

> "Jim" wrote:

>

>> Danny, All my server are Server 2003 SP2 already so are you saying that I

>> just have to run the second disk and then they are full R2 machines?

>>

>> One of the main reasons I want to have R2 is the ability to establish

>> quotas

>> on individual folders to limit the amount a user can put there.

>> Can I just install the second disk on the member server that I want to

>> have

>> the quota's on and not upgrade the domain controllers to R2?

>>

>> Thanks!

>>

>> Jim

>>

>>

>>

>>

>> "Danny Sanders" <DSanders@NOSPAMciber.com> wrote in message

>> news:%232SesdLdIHA.3736@TK2MSFTNGP04.phx.gbl...

>> > R2 is Win 2k3 SP2 with feature upgrades. You would run adprep on the

>> > schema master for your domain, then install the updated R2 features on

>> > the

>> > servers you want to use the updated features on by installing the

>> > second

>> > disk of the R2 set on those servers. If you are not going to use the

>> > updated features, there is no need to install the second disk. By only

>> > using the first disk you will have a Win 2k3 SP 2 server ready to go.

>> > At

>> > any point later you can add the R2 updated features on this server by

>> > running setup2 from the second disk of the R2 set.

>> >

>> > FYI I've never see anyone in these news groups that said the schema

>> > update

>> > went belly up. But good backups is a good Idea.

>> >

>> >

>> > hth

>> > DDS

>> >

>> > "Jim" <jj@nospam.com> wrote in message

>> > news:%23Vr%23IYLdIHA.4312@TK2MSFTNGP03.phx.gbl...

>> >> Hello, I have a Server 2003 domain and need to upgrade the hardware of

>> >> 2

>> >> of my domain controllers. I thought this would be a good time to move

>> >> to

>> >> Server 2003 R2.

>> >>

>> >> I wanted to do a sanity check on the process and make sure there are

>> >> no

>> >> gotcha's that I've not yet read about.

>> >>

>> >> I've built the hardware and installed Server 2003 R2 and understand

>> >> that

>> >> the next step is to run the forest prep. I've got good tape backups

>> >> of

>> >> the domain controllers and individual system state backups of each as

>> >> well.

>> >>

>> >> Would there be any other best practices that I should do from a

>> >> disaster

>> >> standpoint in case the forest prep goes south and I need to restore?

>> >>

>> >> Or is this upgrade so minor that I'm worrying too much?

>> >>

>> >> Any guidance would be appreciated.

>> >>

>> >> Thanks

>> >> Jim

>> >>

>> >

>> >

>>

>>

[Guest Jim]

Re: Adding new 2003 R2 Domain controllers to existing Server 2003

 

Re: Adding new 2003 R2 Domain controllers to existing Server 2003

 

No problem, as a volume license customer I have the original R2 disks as

well as the R2 with SP2 versions but thanks for pointing that out.

 

Jim

 

"Baboon" <baboon@news.postalias> wrote in message

news:7FF5FD9A-2E6A-4B82-A594-9E89321DAB23@microsoft.com...

>I don't think this is going to be a problem, but one correction: W2K3 R2

> came out with SP1 slipstreamed, not SP2. That said, I imagine you can

> also

> buy W2K3 R2 with SP2 slipstreamed at this point.

>

> I am sure you can use disk 2 to install the R2 components on a SP2

> installation anyway. You do have the product key for R2, correct? You

> will

> be prompted if your server was installed from pre-R2 W2K3 media.

>

> "Jim" wrote:

>

>> Danny, All my server are Server 2003 SP2 already so are you saying that I

>> just have to run the second disk and then they are full R2 machines?

>>

>> One of the main reasons I want to have R2 is the ability to establish

>> quotas

>> on individual folders to limit the amount a user can put there.

>> Can I just install the second disk on the member server that I want to

>> have

>> the quota's on and not upgrade the domain controllers to R2?

>>

>> Thanks!

>>

>> Jim

>>

>>

>>

>>

>> "Danny Sanders" <DSanders@NOSPAMciber.com> wrote in message

>> news:%232SesdLdIHA.3736@TK2MSFTNGP04.phx.gbl...

>> > R2 is Win 2k3 SP2 with feature upgrades. You would run adprep on the

>> > schema master for your domain, then install the updated R2 features on

>> > the

>> > servers you want to use the updated features on by installing the

>> > second

>> > disk of the R2 set on those servers. If you are not going to use the

>> > updated features, there is no need to install the second disk. By only

>> > using the first disk you will have a Win 2k3 SP 2 server ready to go.

>> > At

>> > any point later you can add the R2 updated features on this server by

>> > running setup2 from the second disk of the R2 set.

>> >

>> > FYI I've never see anyone in these news groups that said the schema

>> > update

>> > went belly up. But good backups is a good Idea.

>> >

>> >

>> > hth

>> > DDS

>> >

>> > "Jim" <jj@nospam.com> wrote in message

>> > news:%23Vr%23IYLdIHA.4312@TK2MSFTNGP03.phx.gbl...

>> >> Hello, I have a Server 2003 domain and need to upgrade the hardware of

>> >> 2

>> >> of my domain controllers. I thought this would be a good time to move

>> >> to

>> >> Server 2003 R2.

>> >>

>> >> I wanted to do a sanity check on the process and make sure there are

>> >> no

>> >> gotcha's that I've not yet read about.

>> >>

>> >> I've built the hardware and installed Server 2003 R2 and understand

>> >> that

>> >> the next step is to run the forest prep. I've got good tape backups

>> >> of

>> >> the domain controllers and individual system state backups of each as

>> >> well.

>> >>

>> >> Would there be any other best practices that I should do from a

>> >> disaster

>> >> standpoint in case the forest prep goes south and I need to restore?

>> >>

>> >> Or is this upgrade so minor that I'm worrying too much?

>> >>

>> >> Any guidance would be appreciated.

>> >>

>> >> Thanks

>> >> Jim

>> >>

>> >

>> >

>>

>>

[Guest Baboon]

Re: Adding new 2003 R2 Domain controllers to existing Server 2003

 

Re: Adding new 2003 R2 Domain controllers to existing Server 2003

 

OK, thanks. I haven't been in that scenario to this point.

 

"Danny Sanders" wrote:

> > I am sure you can use disk 2 to install the R2 components on a SP2

> > installation anyway.

>

> Actually no you can't. If you have Win 2k SP1 R2 disks it can only be

> installed on a Win 2k3 server with SP 1.

> If you have Win 2k3 SP2 R2 disks you will have to install SP 2 on the server

> before it will work.

>

> hth

> DDS

>

> "Baboon" <baboon@news.postalias> wrote in message

> news:7FF5FD9A-2E6A-4B82-A594-9E89321DAB23@microsoft.com...

> >I don't think this is going to be a problem, but one correction: W2K3 R2

> > came out with SP1 slipstreamed, not SP2. That said, I imagine you can

> > also

> > buy W2K3 R2 with SP2 slipstreamed at this point.

> >

> > I am sure you can use disk 2 to install the R2 components on a SP2

> > installation anyway. You do have the product key for R2, correct? You

> > will

> > be prompted if your server was installed from pre-R2 W2K3 media.

> >

> > "Jim" wrote:

> >

> >> Danny, All my server are Server 2003 SP2 already so are you saying that I

> >> just have to run the second disk and then they are full R2 machines?

> >>

> >> One of the main reasons I want to have R2 is the ability to establish

> >> quotas

> >> on individual folders to limit the amount a user can put there.

> >> Can I just install the second disk on the member server that I want to

> >> have

> >> the quota's on and not upgrade the domain controllers to R2?

> >>

> >> Thanks!

> >>

> >> Jim

> >>

> >>

> >>

> >>

> >> "Danny Sanders" <DSanders@NOSPAMciber.com> wrote in message

> >> news:%232SesdLdIHA.3736@TK2MSFTNGP04.phx.gbl...

> >> > R2 is Win 2k3 SP2 with feature upgrades. You would run adprep on the

> >> > schema master for your domain, then install the updated R2 features on

> >> > the

> >> > servers you want to use the updated features on by installing the

> >> > second

> >> > disk of the R2 set on those servers. If you are not going to use the

> >> > updated features, there is no need to install the second disk. By only

> >> > using the first disk you will have a Win 2k3 SP 2 server ready to go.

> >> > At

> >> > any point later you can add the R2 updated features on this server by

> >> > running setup2 from the second disk of the R2 set.

> >> >

> >> > FYI I've never see anyone in these news groups that said the schema

> >> > update

> >> > went belly up. But good backups is a good Idea.

> >> >

> >> >

> >> > hth

> >> > DDS

> >> >

> >> > "Jim" <jj@nospam.com> wrote in message

> >> > news:%23Vr%23IYLdIHA.4312@TK2MSFTNGP03.phx.gbl...

> >> >> Hello, I have a Server 2003 domain and need to upgrade the hardware of

> >> >> 2

> >> >> of my domain controllers. I thought this would be a good time to move

> >> >> to

> >> >> Server 2003 R2.

> >> >>

> >> >> I wanted to do a sanity check on the process and make sure there are

> >> >> no

> >> >> gotcha's that I've not yet read about.

> >> >>

> >> >> I've built the hardware and installed Server 2003 R2 and understand

> >> >> that

> >> >> the next step is to run the forest prep. I've got good tape backups

> >> >> of

> >> >> the domain controllers and individual system state backups of each as

> >> >> well.

> >> >>

> >> >> Would there be any other best practices that I should do from a

> >> >> disaster

> >> >> standpoint in case the forest prep goes south and I need to restore?

> >> >>

> >> >> Or is this upgrade so minor that I'm worrying too much?

> >> >>

> >> >> Any guidance would be appreciated.

> >> >>

> >> >> Thanks

> >> >> Jim

> >> >>

> >> >

> >> >

> >>

> >>

>

>

>