todstuartfl Posted September 22, 2007 Posted September 22, 2007 i was trying to upgrade my driver for my LG monitor. i by mistake disconnected my monitor adapter and rebooted so now it boots up and then disconnects my monitor card and i have a black screen Quote
danzil Posted September 22, 2007 Posted September 22, 2007 boot into safe mode by tapping f8 at startup,then remove the driver,and reboot.(remove it via device mannager). or boot into safe mode then do a system restore.. your lg monitor does NOT reqiure drivers your graphics card on the other hand does. what graphics card do you have....in device manager also. i will post you a link to the latest driver,,,,,,,,,,,,,,,,,, regards danzil Quote Windows 10 Pro x64Aqua Jeantech Gaming case550watt psu.MSI Gaming Board32GB DDR3 Corsair gaming RamGenuine Intel i7 3.2Ghz4 x 24x dvdrw 150GB SSD750GB Hybrid Drive256 RAID PCI/E SSD for OSand loads of other bits i really dont need :D
todstuartfl Posted September 22, 2007 Author Posted September 22, 2007 when i do f8 safe mode what comes on my monitor is a bunch of "multi(0)disk(0)partition(0) down the screen and then nothing. all that stays on the screen & i can not do anything Quote
danzil Posted September 23, 2007 Posted September 23, 2007 also try vga mode,this will change the reolution and may possible allow you into xp to do a restore.or try last known good configuraion that also may work.... regards danzil. Quote Windows 10 Pro x64Aqua Jeantech Gaming case550watt psu.MSI Gaming Board32GB DDR3 Corsair gaming RamGenuine Intel i7 3.2Ghz4 x 24x dvdrw 150GB SSD750GB Hybrid Drive256 RAID PCI/E SSD for OSand loads of other bits i really dont need :D
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.