Jump to content

Terminal Services w/ printers

Guest Style23

By Guest Style23
in Windows NT Server

 Share

Recommended Posts

Guest Style23

Guest Style23

Posted
Posted

I log onto a terminal server with a Roaming Profile. There 3 computers people

log onto to access this one program. There is a policy set so the user can't

do basically anything but run the program and go into the printer settings.

My question is when i'm in the terminal server and delete this printer, once

I log off and then log back into the terminal server the printer is back. The

printer that i'm deleting is no longer on the network nor installed on the

computer it was locally hooked up to. I deleted the registry key which holds

the printer setting and it comes back, once I log off and log back on.

Basically any change that I make with in the terminal server while i'm

roaming it will not save. I have administrator rights and a GPO is applied to

the 3 computer but for my username the GPO doesn't apply to me. If I log on

locally I can add and delete a printer and it will save, but for roaming it

reverts back to an old setting. Any answers to this problem?

 

 

 

 

 

Client computers: Window XP

 

Server: Windows Server 2003

  • Replies 9
  • Created
  • Last Reply

Popular Days

Popular Days

Guest Support_Pmax

Guest Support_Pmax

Posted
Posted

RE: Terminal Services w/ printers

 

Is the printer still setup on your local computer?

How is it displayed in your Printers, does it have a session attached to it?

 

"Style23" wrote:

> I log onto a terminal server with a Roaming Profile. There 3 computers people

> log onto to access this one program. There is a policy set so the user can't

> do basically anything but run the program and go into the printer settings.

> My question is when i'm in the terminal server and delete this printer, once

> I log off and then log back into the terminal server the printer is back. The

> printer that i'm deleting is no longer on the network nor installed on the

> computer it was locally hooked up to. I deleted the registry key which holds

> the printer setting and it comes back, once I log off and log back on.

> Basically any change that I make with in the terminal server while i'm

> roaming it will not save. I have administrator rights and a GPO is applied to

> the 3 computer but for my username the GPO doesn't apply to me. If I log on

> locally I can add and delete a printer and it will save, but for roaming it

> reverts back to an old setting. Any answers to this problem?

>

>

>

>

>

> Client computers: Window XP

>

> Server: Windows Server 2003

>

Guest Style23

Guest Style23

Posted
Posted

RE: Terminal Services w/ printers

 

The printer is not setup on the local client machine nor does the printer

display a session when looking at the settings on the terminal server.

Strange?

 

"Support_Pmax" wrote:

> Is the printer still setup on your local computer?

> How is it displayed in your Printers, does it have a session attached to it?

>

> "Style23" wrote:

>

> > I log onto a terminal server with a Roaming Profile. There 3 computers people

> > log onto to access this one program. There is a policy set so the user can't

> > do basically anything but run the program and go into the printer settings.

> > My question is when i'm in the terminal server and delete this printer, once

> > I log off and then log back into the terminal server the printer is back. The

> > printer that i'm deleting is no longer on the network nor installed on the

> > computer it was locally hooked up to. I deleted the registry key which holds

> > the printer setting and it comes back, once I log off and log back on.

> > Basically any change that I make with in the terminal server while i'm

> > roaming it will not save. I have administrator rights and a GPO is applied to

> > the 3 computer but for my username the GPO doesn't apply to me. If I log on

> > locally I can add and delete a printer and it will save, but for roaming it

> > reverts back to an old setting. Any answers to this problem?

> >

> >

> >

> >

> >

> > Client computers: Window XP

> >

> > Server: Windows Server 2003

> >

Guest Vera Noest [MVP]

Guest Vera Noest [MVP]

Posted
Posted

RE: Terminal Services w/ printers

 

Sounds like you use the same profile for client and TS logons. Then

the results become often unpredictable (last write/save operation

wins). Is also known to lead to profile corruption.

Make sure that you define different profiles for client and TS.

_________________________________________________________

Vera Noest

MCSE, CCEA, Microsoft MVP - Terminal Server

TS troubleshooting: http://ts.veranoest.net

___ please respond in newsgroup, NOT by private email ___

 

=?Utf-8?B?U3R5bGUyMw==?= <Style23@discussions.microsoft.com> wrote

on 21 mar 2008 in microsoft.public.windows.terminal_services:

> The printer is not setup on the local client machine nor does

> the printer display a session when looking at the settings on

> the terminal server. Strange?

>

> "Support_Pmax" wrote:

>

>> Is the printer still setup on your local computer?

>> How is it displayed in your Printers, does it have a session

>> attached to it?

>>

>> "Style23" wrote:

>>

>> > I log onto a terminal server with a Roaming Profile. There 3

>> > computers people log onto to access this one program. There

>> > is a policy set so the user can't do basically anything but

>> > run the program and go into the printer settings. My question

>> > is when i'm in the terminal server and delete this printer,

>> > once I log off and then log back into the terminal server the

>> > printer is back. The printer that i'm deleting is no longer

>> > on the network nor installed on the computer it was locally

>> > hooked up to. I deleted the registry key which holds the

>> > printer setting and it comes back, once I log off and log

>> > back on. Basically any change that I make with in the

>> > terminal server while i'm roaming it will not save. I have

>> > administrator rights and a GPO is applied to the 3 computer

>> > but for my username the GPO doesn't apply to me. If I log on

>> > locally I can add and delete a printer and it will save, but

>> > for roaming it reverts back to an old setting. Any answers to

>> > this problem?

>> >

>> >

>> >

>> >

>> >

>> > Client computers: Window XP

>> >

>> > Server: Windows Server 2003

Guest Style23

Guest Style23

Posted
Posted

RE: Terminal Services w/ printers

 

\\homesvr\user profiles\tom - For User Profile

 

\\homesvr\ts roaming profiles\tom - For Terminal Server Profiles

 

Seems like 2 different profiles. It use to work fine before and now if I add

a printer it will not save nor if I delete a printer it will nto save. Can it

be something in my GPO settings. This is for all users who logon to the 3

computers that are the terminal servers, and this is only happens to the

roaming profile. Once again I state if I change them to local there settings

will save. But I don't want them loging on locally.

 

Data collected on: 3/24/2008 3:40:50 PM hide all

 

Computer Configuration (Enabled)hide

Administrative Templateshide

System/Group Policyhide

Policy Setting

User Group Policy loopback processing mode Enabled

Mode: Replace

 

 

System/User Profileshide

Policy Setting

Add the Administrators security group to roaming user profiles Enabled

Delete cached copies of roaming profiles Enabled

Prevent Roaming Profile changes from propagating to the server Enabled

 

Windows Components/Terminal Serviceshide

Policy Setting

Set path for TS Roaming Profiles Enabled

Profile path \\Homesvr\TS Roaming Profiles

Specify the path in the form, \\Computername\Sharename

Do not append the user name to the profile path. Disabled

 

 

Windows Components/Windows Installerhide

Policy Setting

Disable Windows Installer Enabled

Disable Windows Installer For non-managed apps only

 

 

User Configuration (Enabled)hide

Administrative Templateshide

Control Panelhide

Policy Setting

Prohibit access to the Control Panel Enabled

 

Desktophide

Policy Setting

Don't save settings at exit Enabled

Hide Internet Explorer icon on desktop Enabled

Hide My Network Places icon on desktop Enabled

Prevent adding, dragging, dropping and closing the Taskbar's toolbars Enabled

Prohibit adjusting desktop toolbars Enabled

Prohibit user from changing My Documents path Enabled

Remove My Computer icon on the desktop Enabled

Remove My Documents icon on the desktop Enabled

Remove Recycle Bin icon from desktop Enabled

 

Desktop/Active Desktophide

Policy Setting

Enable Active Desktop Disabled

Prohibit changes Enabled

 

Start Menu and Taskbarhide

Policy Setting

Add Logoff to the Start Menu Enabled

Do not display any custom toolbars in the taskbar Enabled

Lock the Taskbar Enabled

Prevent changes to Taskbar and Start Menu Settings Enabled

Remove access to the context menus for the taskbar Enabled

Remove All Programs list from the Start menu Enabled

Remove and prevent access to the Shut Down command Enabled

Remove Clock from the system notification area Enabled

Remove Documents menu from Start Menu Enabled

Remove Help menu from Start Menu Enabled

Remove links and access to Windows Update Enabled

Remove My Documents icon from Start Menu Enabled

Remove Run menu from Start Menu Enabled

Remove Search menu from Start Menu Enabled

 

Windows Components/Task Schedulerhide

Policy Setting

Prevent Task Run or End Enabled

Prohibit New Task Creation Enabled

 

Windows Components/Windows Messengerhide

Policy Setting

Do not allow Windows Messenger to be run Enabled

 

 

 

"Vera Noest [MVP]" wrote:

> Sounds like you use the same profile for client and TS logons. Then

> the results become often unpredictable (last write/save operation

> wins). Is also known to lead to profile corruption.

> Make sure that you define different profiles for client and TS.

> _________________________________________________________

> Vera Noest

> MCSE, CCEA, Microsoft MVP - Terminal Server

> TS troubleshooting: http://ts.veranoest.net

> ___ please respond in newsgroup, NOT by private email ___

>

> =?Utf-8?B?U3R5bGUyMw==?= <Style23@discussions.microsoft.com> wrote

> on 21 mar 2008 in microsoft.public.windows.terminal_services:

>

> > The printer is not setup on the local client machine nor does

> > the printer display a session when looking at the settings on

> > the terminal server. Strange?

> >

> > "Support_Pmax" wrote:

> >

> >> Is the printer still setup on your local computer?

> >> How is it displayed in your Printers, does it have a session

> >> attached to it?

> >>

> >> "Style23" wrote:

> >>

> >> > I log onto a terminal server with a Roaming Profile. There 3

> >> > computers people log onto to access this one program. There

> >> > is a policy set so the user can't do basically anything but

> >> > run the program and go into the printer settings. My question

> >> > is when i'm in the terminal server and delete this printer,

> >> > once I log off and then log back into the terminal server the

> >> > printer is back. The printer that i'm deleting is no longer

> >> > on the network nor installed on the computer it was locally

> >> > hooked up to. I deleted the registry key which holds the

> >> > printer setting and it comes back, once I log off and log

> >> > back on. Basically any change that I make with in the

> >> > terminal server while i'm roaming it will not save. I have

> >> > administrator rights and a GPO is applied to the 3 computer

> >> > but for my username the GPO doesn't apply to me. If I log on

> >> > locally I can add and delete a printer and it will save, but

> >> > for roaming it reverts back to an old setting. Any answers to

> >> > this problem?

> >> >

> >> >

> >> >

> >> >

> >> >

> >> > Client computers: Window XP

> >> >

> >> > Server: Windows Server 2003

>

Guest Vera Noest [MVP]

Guest Vera Noest [MVP]

Posted
Posted

RE: Terminal Services w/ printers

 

Can this be the cause?

> Prevent Roaming Profile changes from propagating to the server

> Enabled

 

_________________________________________________________

Vera Noest

MCSE, CCEA, Microsoft MVP - Terminal Server

TS troubleshooting: http://ts.veranoest.net

___ please respond in newsgroup, NOT by private email ___

 

=?Utf-8?B?U3R5bGUyMw==?= <Style23@discussions.microsoft.com> wrote

on 24 mar 2008 in microsoft.public.windows.terminal_services:

> \\homesvr\user profiles\tom - For User Profile

>

> \\homesvr\ts roaming profiles\tom - For Terminal Server Profiles

>

> Seems like 2 different profiles. It use to work fine before and

> now if I add a printer it will not save nor if I delete a

> printer it will nto save. Can it be something in my GPO

> settings. This is for all users who logon to the 3 computers

> that are the terminal servers, and this is only happens to the

> roaming profile. Once again I state if I change them to local

> there settings will save. But I don't want them loging on

> locally.

>

> Data collected on: 3/24/2008 3:40:50 PM hide all

>

> Computer Configuration (Enabled)hide

> Administrative Templateshide

> System/Group Policyhide

> Policy Setting

> User Group Policy loopback processing mode Enabled

> Mode: Replace

>

>

> System/User Profileshide

> Policy Setting

> Add the Administrators security group to roaming user profiles

> Enabled Delete cached copies of roaming profiles Enabled

> Prevent Roaming Profile changes from propagating to the server

> Enabled

>

> Windows Components/Terminal Serviceshide

> Policy Setting

> Set path for TS Roaming Profiles Enabled

> Profile path \\Homesvr\TS Roaming Profiles

> Specify the path in the form, \\Computername\Sharename

> Do not append the user name to the profile path. Disabled

>

>

> Windows Components/Windows Installerhide

> Policy Setting

> Disable Windows Installer Enabled

> Disable Windows Installer For non-managed apps only

>

>

> User Configuration (Enabled)hide

> Administrative Templateshide

> Control Panelhide

> Policy Setting

> Prohibit access to the Control Panel Enabled

>

> Desktophide

> Policy Setting

> Don't save settings at exit Enabled

> Hide Internet Explorer icon on desktop Enabled

> Hide My Network Places icon on desktop Enabled

> Prevent adding, dragging, dropping and closing the Taskbar's

> toolbars Enabled Prohibit adjusting desktop toolbars Enabled

> Prohibit user from changing My Documents path Enabled

> Remove My Computer icon on the desktop Enabled

> Remove My Documents icon on the desktop Enabled

> Remove Recycle Bin icon from desktop Enabled

>

> Desktop/Active Desktophide

> Policy Setting

> Enable Active Desktop Disabled

> Prohibit changes Enabled

>

> Start Menu and Taskbarhide

> Policy Setting

> Add Logoff to the Start Menu Enabled

> Do not display any custom toolbars in the taskbar Enabled

> Lock the Taskbar Enabled

> Prevent changes to Taskbar and Start Menu Settings Enabled

> Remove access to the context menus for the taskbar Enabled

> Remove All Programs list from the Start menu Enabled

> Remove and prevent access to the Shut Down command Enabled

> Remove Clock from the system notification area Enabled

> Remove Documents menu from Start Menu Enabled

> Remove Help menu from Start Menu Enabled

> Remove links and access to Windows Update Enabled

> Remove My Documents icon from Start Menu Enabled

> Remove Run menu from Start Menu Enabled

> Remove Search menu from Start Menu Enabled

>

> Windows Components/Task Schedulerhide

> Policy Setting

> Prevent Task Run or End Enabled

> Prohibit New Task Creation Enabled

>

> Windows Components/Windows Messengerhide

> Policy Setting

> Do not allow Windows Messenger to be run Enabled

>

>

>

> "Vera Noest [MVP]" wrote:

>

>> Sounds like you use the same profile for client and TS logons.

>> Then the results become often unpredictable (last write/save

>> operation wins). Is also known to lead to profile corruption.

>> Make sure that you define different profiles for client and TS.

>> _________________________________________________________

>> Vera Noest

>> MCSE, CCEA, Microsoft MVP - Terminal Server

>> TS troubleshooting: http://ts.veranoest.net

>> ___ please respond in newsgroup, NOT by private email ___

>>

>> =?Utf-8?B?U3R5bGUyMw==?= <Style23@discussions.microsoft.com>

>> wrote on 21 mar 2008 in

>> microsoft.public.windows.terminal_services:

>>

>> > The printer is not setup on the local client machine nor does

>> > the printer display a session when looking at the settings on

>> > the terminal server. Strange?

>> >

>> > "Support_Pmax" wrote:

>> >

>> >> Is the printer still setup on your local computer?

>> >> How is it displayed in your Printers, does it have a session

>> >> attached to it?

>> >>

>> >> "Style23" wrote:

>> >>

>> >> > I log onto a terminal server with a Roaming Profile. There

>> >> > 3 computers people log onto to access this one program.

>> >> > There is a policy set so the user can't do basically

>> >> > anything but run the program and go into the printer

>> >> > settings. My question is when i'm in the terminal server

>> >> > and delete this printer, once I log off and then log back

>> >> > into the terminal server the printer is back. The printer

>> >> > that i'm deleting is no longer on the network nor

>> >> > installed on the computer it was locally hooked up to. I

>> >> > deleted the registry key which holds the printer setting

>> >> > and it comes back, once I log off and log back on.

>> >> > Basically any change that I make with in the terminal

>> >> > server while i'm roaming it will not save. I have

>> >> > administrator rights and a GPO is applied to the 3

>> >> > computer but for my username the GPO doesn't apply to me.

>> >> > If I log on locally I can add and delete a printer and it

>> >> > will save, but for roaming it reverts back to an old

>> >> > setting. Any answers to this problem?

>> >> >

>> >> >

>> >> >

>> >> >

>> >> >

>> >> > Client computers: Window XP

>> >> >

>> >> > Server: Windows Server 2003

Guest Style23

Guest Style23

Posted
Posted

RE: Terminal Services w/ printers

 

Thats makes perfect sense, of course I couldn't see it. I just made the

changes and i'll get back to the newsgroup if its a success.

 

"Vera Noest [MVP]" wrote:

> Can this be the cause?

>

> > Prevent Roaming Profile changes from propagating to the server

> > Enabled

>

> _________________________________________________________

> Vera Noest

> MCSE, CCEA, Microsoft MVP - Terminal Server

> TS troubleshooting: http://ts.veranoest.net

> ___ please respond in newsgroup, NOT by private email ___

>

> =?Utf-8?B?U3R5bGUyMw==?= <Style23@discussions.microsoft.com> wrote

> on 24 mar 2008 in microsoft.public.windows.terminal_services:

>

> > \\homesvr\user profiles\tom - For User Profile

> >

> > \\homesvr\ts roaming profiles\tom - For Terminal Server Profiles

> >

> > Seems like 2 different profiles. It use to work fine before and

> > now if I add a printer it will not save nor if I delete a

> > printer it will nto save. Can it be something in my GPO

> > settings. This is for all users who logon to the 3 computers

> > that are the terminal servers, and this is only happens to the

> > roaming profile. Once again I state if I change them to local

> > there settings will save. But I don't want them loging on

> > locally.

> >

> > Data collected on: 3/24/2008 3:40:50 PM hide all

> >

> > Computer Configuration (Enabled)hide

> > Administrative Templateshide

> > System/Group Policyhide

> > Policy Setting

> > User Group Policy loopback processing mode Enabled

> > Mode: Replace

> >

> >

> > System/User Profileshide

> > Policy Setting

> > Add the Administrators security group to roaming user profiles

> > Enabled Delete cached copies of roaming profiles Enabled

> > Prevent Roaming Profile changes from propagating to the server

> > Enabled

> >

> > Windows Components/Terminal Serviceshide

> > Policy Setting

> > Set path for TS Roaming Profiles Enabled

> > Profile path \\Homesvr\TS Roaming Profiles

> > Specify the path in the form, \\Computername\Sharename

> > Do not append the user name to the profile path. Disabled

> >

> >

> > Windows Components/Windows Installerhide

> > Policy Setting

> > Disable Windows Installer Enabled

> > Disable Windows Installer For non-managed apps only

> >

> >

> > User Configuration (Enabled)hide

> > Administrative Templateshide

> > Control Panelhide

> > Policy Setting

> > Prohibit access to the Control Panel Enabled

> >

> > Desktophide

> > Policy Setting

> > Don't save settings at exit Enabled

> > Hide Internet Explorer icon on desktop Enabled

> > Hide My Network Places icon on desktop Enabled

> > Prevent adding, dragging, dropping and closing the Taskbar's

> > toolbars Enabled Prohibit adjusting desktop toolbars Enabled

> > Prohibit user from changing My Documents path Enabled

> > Remove My Computer icon on the desktop Enabled

> > Remove My Documents icon on the desktop Enabled

> > Remove Recycle Bin icon from desktop Enabled

> >

> > Desktop/Active Desktophide

> > Policy Setting

> > Enable Active Desktop Disabled

> > Prohibit changes Enabled

> >

> > Start Menu and Taskbarhide

> > Policy Setting

> > Add Logoff to the Start Menu Enabled

> > Do not display any custom toolbars in the taskbar Enabled

> > Lock the Taskbar Enabled

> > Prevent changes to Taskbar and Start Menu Settings Enabled

> > Remove access to the context menus for the taskbar Enabled

> > Remove All Programs list from the Start menu Enabled

> > Remove and prevent access to the Shut Down command Enabled

> > Remove Clock from the system notification area Enabled

> > Remove Documents menu from Start Menu Enabled

> > Remove Help menu from Start Menu Enabled

> > Remove links and access to Windows Update Enabled

> > Remove My Documents icon from Start Menu Enabled

> > Remove Run menu from Start Menu Enabled

> > Remove Search menu from Start Menu Enabled

> >

> > Windows Components/Task Schedulerhide

> > Policy Setting

> > Prevent Task Run or End Enabled

> > Prohibit New Task Creation Enabled

> >

> > Windows Components/Windows Messengerhide

> > Policy Setting

> > Do not allow Windows Messenger to be run Enabled

> >

> >

> >

> > "Vera Noest [MVP]" wrote:

> >

> >> Sounds like you use the same profile for client and TS logons.

> >> Then the results become often unpredictable (last write/save

> >> operation wins). Is also known to lead to profile corruption.

> >> Make sure that you define different profiles for client and TS.

> >> _________________________________________________________

> >> Vera Noest

> >> MCSE, CCEA, Microsoft MVP - Terminal Server

> >> TS troubleshooting: http://ts.veranoest.net

> >> ___ please respond in newsgroup, NOT by private email ___

> >>

> >> =?Utf-8?B?U3R5bGUyMw==?= <Style23@discussions.microsoft.com>

> >> wrote on 21 mar 2008 in

> >> microsoft.public.windows.terminal_services:

> >>

> >> > The printer is not setup on the local client machine nor does

> >> > the printer display a session when looking at the settings on

> >> > the terminal server. Strange?

> >> >

> >> > "Support_Pmax" wrote:

> >> >

> >> >> Is the printer still setup on your local computer?

> >> >> How is it displayed in your Printers, does it have a session

> >> >> attached to it?

> >> >>

> >> >> "Style23" wrote:

> >> >>

> >> >> > I log onto a terminal server with a Roaming Profile. There

> >> >> > 3 computers people log onto to access this one program.

> >> >> > There is a policy set so the user can't do basically

> >> >> > anything but run the program and go into the printer

> >> >> > settings. My question is when i'm in the terminal server

> >> >> > and delete this printer, once I log off and then log back

> >> >> > into the terminal server the printer is back. The printer

> >> >> > that i'm deleting is no longer on the network nor

> >> >> > installed on the computer it was locally hooked up to. I

> >> >> > deleted the registry key which holds the printer setting

> >> >> > and it comes back, once I log off and log back on.

> >> >> > Basically any change that I make with in the terminal

> >> >> > server while i'm roaming it will not save. I have

> >> >> > administrator rights and a GPO is applied to the 3

> >> >> > computer but for my username the GPO doesn't apply to me.

> >> >> > If I log on locally I can add and delete a printer and it

> >> >> > will save, but for roaming it reverts back to an old

> >> >> > setting. Any answers to this problem?

> >> >> >

> >> >> >

> >> >> >

> >> >> >

> >> >> >

> >> >> > Client computers: Window XP

> >> >> >

> >> >> > Server: Windows Server 2003

>

Guest Style23

Guest Style23

Posted
Posted

RE: Terminal Services w/ printers

 

I also wanted to state that this might not work, because when I look at the

GPO settings --> delegations, my username and a couple of others have the

Apply Group Policy field - Deny is "checked". It might be another cause, but

i'll wait to see if that change has any effect. I tried the gpudate command

at the dos prompt and still i'm getting the same results. Tomorrow i'll post

back to let you know the status.

 

"Style23" wrote:

> Thats makes perfect sense, of course I couldn't see it. I just made the

> changes and i'll get back to the newsgroup if its a success.

>

> "Vera Noest [MVP]" wrote:

>

> > Can this be the cause?

> >

> > > Prevent Roaming Profile changes from propagating to the server

> > > Enabled

> >

> > _________________________________________________________

> > Vera Noest

> > MCSE, CCEA, Microsoft MVP - Terminal Server

> > TS troubleshooting: http://ts.veranoest.net

> > ___ please respond in newsgroup, NOT by private email ___

> >

> > =?Utf-8?B?U3R5bGUyMw==?= <Style23@discussions.microsoft.com> wrote

> > on 24 mar 2008 in microsoft.public.windows.terminal_services:

> >

> > > \\homesvr\user profiles\tom - For User Profile

> > >

> > > \\homesvr\ts roaming profiles\tom - For Terminal Server Profiles

> > >

> > > Seems like 2 different profiles. It use to work fine before and

> > > now if I add a printer it will not save nor if I delete a

> > > printer it will nto save. Can it be something in my GPO

> > > settings. This is for all users who logon to the 3 computers

> > > that are the terminal servers, and this is only happens to the

> > > roaming profile. Once again I state if I change them to local

> > > there settings will save. But I don't want them loging on

> > > locally.

> > >

> > > Data collected on: 3/24/2008 3:40:50 PM hide all

> > >

> > > Computer Configuration (Enabled)hide

> > > Administrative Templateshide

> > > System/Group Policyhide

> > > Policy Setting

> > > User Group Policy loopback processing mode Enabled

> > > Mode: Replace

> > >

> > >

> > > System/User Profileshide

> > > Policy Setting

> > > Add the Administrators security group to roaming user profiles

> > > Enabled Delete cached copies of roaming profiles Enabled

> > > Prevent Roaming Profile changes from propagating to the server

> > > Enabled

> > >

> > > Windows Components/Terminal Serviceshide

> > > Policy Setting

> > > Set path for TS Roaming Profiles Enabled

> > > Profile path \\Homesvr\TS Roaming Profiles

> > > Specify the path in the form, \\Computername\Sharename

> > > Do not append the user name to the profile path. Disabled

> > >

> > >

> > > Windows Components/Windows Installerhide

> > > Policy Setting

> > > Disable Windows Installer Enabled

> > > Disable Windows Installer For non-managed apps only

> > >

> > >

> > > User Configuration (Enabled)hide

> > > Administrative Templateshide

> > > Control Panelhide

> > > Policy Setting

> > > Prohibit access to the Control Panel Enabled

> > >

> > > Desktophide

> > > Policy Setting

> > > Don't save settings at exit Enabled

> > > Hide Internet Explorer icon on desktop Enabled

> > > Hide My Network Places icon on desktop Enabled

> > > Prevent adding, dragging, dropping and closing the Taskbar's

> > > toolbars Enabled Prohibit adjusting desktop toolbars Enabled

> > > Prohibit user from changing My Documents path Enabled

> > > Remove My Computer icon on the desktop Enabled

> > > Remove My Documents icon on the desktop Enabled

> > > Remove Recycle Bin icon from desktop Enabled

> > >

> > > Desktop/Active Desktophide

> > > Policy Setting

> > > Enable Active Desktop Disabled

> > > Prohibit changes Enabled

> > >

> > > Start Menu and Taskbarhide

> > > Policy Setting

> > > Add Logoff to the Start Menu Enabled

> > > Do not display any custom toolbars in the taskbar Enabled

> > > Lock the Taskbar Enabled

> > > Prevent changes to Taskbar and Start Menu Settings Enabled

> > > Remove access to the context menus for the taskbar Enabled

> > > Remove All Programs list from the Start menu Enabled

> > > Remove and prevent access to the Shut Down command Enabled

> > > Remove Clock from the system notification area Enabled

> > > Remove Documents menu from Start Menu Enabled

> > > Remove Help menu from Start Menu Enabled

> > > Remove links and access to Windows Update Enabled

> > > Remove My Documents icon from Start Menu Enabled

> > > Remove Run menu from Start Menu Enabled

> > > Remove Search menu from Start Menu Enabled

> > >

> > > Windows Components/Task Schedulerhide

> > > Policy Setting

> > > Prevent Task Run or End Enabled

> > > Prohibit New Task Creation Enabled

> > >

> > > Windows Components/Windows Messengerhide

> > > Policy Setting

> > > Do not allow Windows Messenger to be run Enabled

> > >

> > >

> > >

> > > "Vera Noest [MVP]" wrote:

> > >

> > >> Sounds like you use the same profile for client and TS logons.

> > >> Then the results become often unpredictable (last write/save

> > >> operation wins). Is also known to lead to profile corruption.

> > >> Make sure that you define different profiles for client and TS.

> > >> _________________________________________________________

> > >> Vera Noest

> > >> MCSE, CCEA, Microsoft MVP - Terminal Server

> > >> TS troubleshooting: http://ts.veranoest.net

> > >> ___ please respond in newsgroup, NOT by private email ___

> > >>

> > >> =?Utf-8?B?U3R5bGUyMw==?= <Style23@discussions.microsoft.com>

> > >> wrote on 21 mar 2008 in

> > >> microsoft.public.windows.terminal_services:

> > >>

> > >> > The printer is not setup on the local client machine nor does

> > >> > the printer display a session when looking at the settings on

> > >> > the terminal server. Strange?

> > >> >

> > >> > "Support_Pmax" wrote:

> > >> >

> > >> >> Is the printer still setup on your local computer?

> > >> >> How is it displayed in your Printers, does it have a session

> > >> >> attached to it?

> > >> >>

> > >> >> "Style23" wrote:

> > >> >>

> > >> >> > I log onto a terminal server with a Roaming Profile. There

> > >> >> > 3 computers people log onto to access this one program.

> > >> >> > There is a policy set so the user can't do basically

> > >> >> > anything but run the program and go into the printer

> > >> >> > settings. My question is when i'm in the terminal server

> > >> >> > and delete this printer, once I log off and then log back

> > >> >> > into the terminal server the printer is back. The printer

> > >> >> > that i'm deleting is no longer on the network nor

> > >> >> > installed on the computer it was locally hooked up to. I

> > >> >> > deleted the registry key which holds the printer setting

> > >> >> > and it comes back, once I log off and log back on.

> > >> >> > Basically any change that I make with in the terminal

> > >> >> > server while i'm roaming it will not save. I have

> > >> >> > administrator rights and a GPO is applied to the 3

> > >> >> > computer but for my username the GPO doesn't apply to me.

> > >> >> > If I log on locally I can add and delete a printer and it

> > >> >> > will save, but for roaming it reverts back to an old

> > >> >> > setting. Any answers to this problem?

> > >> >> >

> > >> >> >

> > >> >> >

> > >> >> >

> > >> >> >

> > >> >> > Client computers: Window XP

> > >> >> >

> > >> >> > Server: Windows Server 2003

> >

Guest Style23

Guest Style23

Posted
Posted

RE: Terminal Services w/ printers

 

Ok no need to wait until tomorrow, that was the cause, Vera Noest [MVP]

solved it. Yes!

> Prevent Roaming Profile changes from propagating to the server

> Enabled

 

Right now its holding my settings. I deleted a printer and it stayed. I

added a printer and it stayed. Just curious if the Apply Group Policy field -

Deny is "checked", for my username, why would the GPO be affecting it? Is it

because the OU just has computers in it instead of usernames? So if i'm

roaming and there is no users in the OU which the GPO is being link to, and

i'm one of the users that have the Apply Group Policy field - Deny -

"checked", the GPO will still apply to me because i'm roaming?

 

If you can answer that or not, thank you very much for the solution to the

problem

 

"Style23" wrote:

> I also wanted to state that this might not work, because when I look at the

> GPO settings --> delegations, my username and a couple of others have the

> Apply Group Policy field - Deny is "checked". It might be another cause, but

> i'll wait to see if that change has any effect. I tried the gpudate command

> at the dos prompt and still i'm getting the same results. Tomorrow i'll post

> back to let you know the status.

>

> "Style23" wrote:

>

> > Thats makes perfect sense, of course I couldn't see it. I just made the

> > changes and i'll get back to the newsgroup if its a success.

> >

> > "Vera Noest [MVP]" wrote:

> >

> > > Can this be the cause?

> > >

> > > > Prevent Roaming Profile changes from propagating to the server

> > > > Enabled

> > >

> > > _________________________________________________________

> > > Vera Noest

> > > MCSE, CCEA, Microsoft MVP - Terminal Server

> > > TS troubleshooting: http://ts.veranoest.net

> > > ___ please respond in newsgroup, NOT by private email ___

> > >

> > > =?Utf-8?B?U3R5bGUyMw==?= <Style23@discussions.microsoft.com> wrote

> > > on 24 mar 2008 in microsoft.public.windows.terminal_services:

> > >

> > > > \\homesvr\user profiles\tom - For User Profile

> > > >

> > > > \\homesvr\ts roaming profiles\tom - For Terminal Server Profiles

> > > >

> > > > Seems like 2 different profiles. It use to work fine before and

> > > > now if I add a printer it will not save nor if I delete a

> > > > printer it will nto save. Can it be something in my GPO

> > > > settings. This is for all users who logon to the 3 computers

> > > > that are the terminal servers, and this is only happens to the

> > > > roaming profile. Once again I state if I change them to local

> > > > there settings will save. But I don't want them loging on

> > > > locally.

> > > >

> > > > Data collected on: 3/24/2008 3:40:50 PM hide all

> > > >

> > > > Computer Configuration (Enabled)hide

> > > > Administrative Templateshide

> > > > System/Group Policyhide

> > > > Policy Setting

> > > > User Group Policy loopback processing mode Enabled

> > > > Mode: Replace

> > > >

> > > >

> > > > System/User Profileshide

> > > > Policy Setting

> > > > Add the Administrators security group to roaming user profiles

> > > > Enabled Delete cached copies of roaming profiles Enabled

> > > > Prevent Roaming Profile changes from propagating to the server

> > > > Enabled

> > > >

> > > > Windows Components/Terminal Serviceshide

> > > > Policy Setting

> > > > Set path for TS Roaming Profiles Enabled

> > > > Profile path \\Homesvr\TS Roaming Profiles

> > > > Specify the path in the form, \\Computername\Sharename

> > > > Do not append the user name to the profile path. Disabled

> > > >

> > > >

> > > > Windows Components/Windows Installerhide

> > > > Policy Setting

> > > > Disable Windows Installer Enabled

> > > > Disable Windows Installer For non-managed apps only

> > > >

> > > >

> > > > User Configuration (Enabled)hide

> > > > Administrative Templateshide

> > > > Control Panelhide

> > > > Policy Setting

> > > > Prohibit access to the Control Panel Enabled

> > > >

> > > > Desktophide

> > > > Policy Setting

> > > > Don't save settings at exit Enabled

> > > > Hide Internet Explorer icon on desktop Enabled

> > > > Hide My Network Places icon on desktop Enabled

> > > > Prevent adding, dragging, dropping and closing the Taskbar's

> > > > toolbars Enabled Prohibit adjusting desktop toolbars Enabled

> > > > Prohibit user from changing My Documents path Enabled

> > > > Remove My Computer icon on the desktop Enabled

> > > > Remove My Documents icon on the desktop Enabled

> > > > Remove Recycle Bin icon from desktop Enabled

> > > >

> > > > Desktop/Active Desktophide

> > > > Policy Setting

> > > > Enable Active Desktop Disabled

> > > > Prohibit changes Enabled

> > > >

> > > > Start Menu and Taskbarhide

> > > > Policy Setting

> > > > Add Logoff to the Start Menu Enabled

> > > > Do not display any custom toolbars in the taskbar Enabled

> > > > Lock the Taskbar Enabled

> > > > Prevent changes to Taskbar and Start Menu Settings Enabled

> > > > Remove access to the context menus for the taskbar Enabled

> > > > Remove All Programs list from the Start menu Enabled

> > > > Remove and prevent access to the Shut Down command Enabled

> > > > Remove Clock from the system notification area Enabled

> > > > Remove Documents menu from Start Menu Enabled

> > > > Remove Help menu from Start Menu Enabled

> > > > Remove links and access to Windows Update Enabled

> > > > Remove My Documents icon from Start Menu Enabled

> > > > Remove Run menu from Start Menu Enabled

> > > > Remove Search menu from Start Menu Enabled

> > > >

> > > > Windows Components/Task Schedulerhide

> > > > Policy Setting

> > > > Prevent Task Run or End Enabled

> > > > Prohibit New Task Creation Enabled

> > > >

> > > > Windows Components/Windows Messengerhide

> > > > Policy Setting

> > > > Do not allow Windows Messenger to be run Enabled

> > > >

> > > >

> > > >

> > > > "Vera Noest [MVP]" wrote:

> > > >

> > > >> Sounds like you use the same profile for client and TS logons.

> > > >> Then the results become often unpredictable (last write/save

> > > >> operation wins). Is also known to lead to profile corruption.

> > > >> Make sure that you define different profiles for client and TS.

> > > >> _________________________________________________________

> > > >> Vera Noest

> > > >> MCSE, CCEA, Microsoft MVP - Terminal Server

> > > >> TS troubleshooting: http://ts.veranoest.net

> > > >> ___ please respond in newsgroup, NOT by private email ___

> > > >>

> > > >> =?Utf-8?B?U3R5bGUyMw==?= <Style23@discussions.microsoft.com>

> > > >> wrote on 21 mar 2008 in

> > > >> microsoft.public.windows.terminal_services:

> > > >>

> > > >> > The printer is not setup on the local client machine nor does

> > > >> > the printer display a session when looking at the settings on

> > > >> > the terminal server. Strange?

> > > >> >

> > > >> > "Support_Pmax" wrote:

> > > >> >

> > > >> >> Is the printer still setup on your local computer?

> > > >> >> How is it displayed in your Printers, does it have a session

> > > >> >> attached to it?

> > > >> >>

> > > >> >> "Style23" wrote:

> > > >> >>

> > > >> >> > I log onto a terminal server with a Roaming Profile. There

> > > >> >> > 3 computers people log onto to access this one program.

> > > >> >> > There is a policy set so the user can't do basically

> > > >> >> > anything but run the program and go into the printer

> > > >> >> > settings. My question is when i'm in the terminal server

> > > >> >> > and delete this printer, once I log off and then log back

> > > >> >> > into the terminal server the printer is back. The printer

> > > >> >> > that i'm deleting is no longer on the network nor

> > > >> >> > installed on the computer it was locally hooked up to. I

> > > >> >> > deleted the registry key which holds the printer setting

> > > >> >> > and it comes back, once I log off and log back on.

> > > >> >> > Basically any change that I make with in the terminal

> > > >> >> > server while i'm roaming it will not save. I have

> > > >> >> > administrator rights and a GPO is applied to the 3

> > > >> >> > computer but for my username the GPO doesn't apply to me.

> > > >> >> > If I log on locally I can add and delete a printer and it

> > > >> >> > will save, but for roaming it reverts back to an old

> > > >> >> > setting. Any answers to this problem?

> > > >> >> >

> > > >> >> >

> > > >> >> >

> > > >> >> >

> > > >> >> >

> > > >> >> > Client computers: Window XP

> > > >> >> >

> > > >> >> > Server: Windows Server 2003

> > >

Guest Vera Noest [MVP]

Guest Vera Noest [MVP]

Posted
Posted

RE: Terminal Services w/ printers

 

Great! I'm glad that you problem is solved, and thanks for the

feedback!

_________________________________________________________

Vera Noest

MCSE, CCEA, Microsoft MVP - Terminal Server

TS troubleshooting: http://ts.veranoest.net

___ please respond in newsgroup, NOT by private email ___

 

=?Utf-8?B?U3R5bGUyMw==?= <Style23@discussions.microsoft.com> wrote

on 25 mar 2008 in microsoft.public.windows.terminal_services:

> Ok no need to wait until tomorrow, that was the cause, Vera

> Noest [MVP] solved it. Yes!

>

>> Prevent Roaming Profile changes from propagating to the server

>> Enabled

>

> Right now its holding my settings. I deleted a printer and it

> stayed. I added a printer and it stayed. Just curious if the

> Apply Group Policy field - Deny is "checked", for my username,

> why would the GPO be affecting it? Is it because the OU just has

> computers in it instead of usernames? So if i'm roaming and

> there is no users in the OU which the GPO is being link to, and

> i'm one of the users that have the Apply Group Policy field -

> Deny - "checked", the GPO will still apply to me because i'm

> roaming?

>

> If you can answer that or not, thank you very much for the

> solution to the problem

>

> "Style23" wrote:

>

>> I also wanted to state that this might not work, because when I

>> look at the GPO settings --> delegations, my username and a

>> couple of others have the Apply Group Policy field - Deny is

>> "checked". It might be another cause, but i'll wait to see if

>> that change has any effect. I tried the gpudate command at the

>> dos prompt and still i'm getting the same results. Tomorrow

>> i'll post back to let you know the status.

>>

>> "Style23" wrote:

>>

>> > Thats makes perfect sense, of course I couldn't see it. I

>> > just made the changes and i'll get back to the newsgroup if

>> > its a success.

>> >

>> > "Vera Noest [MVP]" wrote:

>> >

>> > > Can this be the cause?

>> > >

>> > > > Prevent Roaming Profile changes from propagating to the

>> > > > server Enabled

>> > >

>> > > _________________________________________________________

>> > > Vera Noest

>> > > MCSE, CCEA, Microsoft MVP - Terminal Server

>> > > TS troubleshooting: http://ts.veranoest.net

>> > > ___ please respond in newsgroup, NOT by private email ___

>> > >

>> > > =?Utf-8?B?U3R5bGUyMw==?=

>> > > <Style23@discussions.microsoft.com> wrote on 24 mar 2008 in

>> > > microsoft.public.windows.terminal_services:

>> > >

>> > > > \\homesvr\user profiles\tom - For User Profile

>> > > >

>> > > > \\homesvr\ts roaming profiles\tom - For Terminal Server

>> > > > Profiles

>> > > >

>> > > > Seems like 2 different profiles. It use to work fine

>> > > > before and now if I add a printer it will not save nor if

>> > > > I delete a printer it will nto save. Can it be something

>> > > > in my GPO settings. This is for all users who logon to

>> > > > the 3 computers that are the terminal servers, and this

>> > > > is only happens to the roaming profile. Once again I

>> > > > state if I change them to local there settings will save.

>> > > > But I don't want them loging on locally.

>> > > >

>> > > > Data collected on: 3/24/2008 3:40:50 PM hide all

>> > > >

>> > > > Computer Configuration (Enabled)hide

>> > > > Administrative Templateshide

>> > > > System/Group Policyhide

>> > > > Policy Setting

>> > > > User Group Policy loopback processing mode Enabled

>> > > > Mode: Replace

>> > > >

>> > > >

>> > > > System/User Profileshide

>> > > > Policy Setting

>> > > > Add the Administrators security group to roaming user

>> > > > profiles Enabled Delete cached copies of roaming profiles

>> > > > Enabled Prevent Roaming Profile changes from propagating

>> > > > to the server Enabled

>> > > >

>> > > > Windows Components/Terminal Serviceshide

>> > > > Policy Setting

>> > > > Set path for TS Roaming Profiles Enabled

>> > > > Profile path \\Homesvr\TS Roaming Profiles

>> > > > Specify the path in the form, \\Computername\Sharename

>> > > > Do not append the user name to the profile path. Disabled

>> > > >

>> > > >

>> > > > Windows Components/Windows Installerhide

>> > > > Policy Setting

>> > > > Disable Windows Installer Enabled

>> > > > Disable Windows Installer For non-managed apps only

>> > > >

>> > > >

>> > > > User Configuration (Enabled)hide

>> > > > Administrative Templateshide

>> > > > Control Panelhide

>> > > > Policy Setting

>> > > > Prohibit access to the Control Panel Enabled

>> > > >

>> > > > Desktophide

>> > > > Policy Setting

>> > > > Don't save settings at exit Enabled

>> > > > Hide Internet Explorer icon on desktop Enabled

>> > > > Hide My Network Places icon on desktop Enabled

>> > > > Prevent adding, dragging, dropping and closing the

>> > > > Taskbar's toolbars Enabled Prohibit adjusting desktop

>> > > > toolbars Enabled Prohibit user from changing My Documents

>> > > > path Enabled Remove My Computer icon on the desktop

>> > > > Enabled Remove My Documents icon on the desktop Enabled

>> > > > Remove Recycle Bin icon from desktop Enabled

>> > > >

>> > > > Desktop/Active Desktophide

>> > > > Policy Setting

>> > > > Enable Active Desktop Disabled

>> > > > Prohibit changes Enabled

>> > > >

>> > > > Start Menu and Taskbarhide

>> > > > Policy Setting

>> > > > Add Logoff to the Start Menu Enabled

>> > > > Do not display any custom toolbars in the taskbar Enabled

>> > > > Lock the Taskbar Enabled

>> > > > Prevent changes to Taskbar and Start Menu Settings

>> > > > Enabled Remove access to the context menus for the

>> > > > taskbar Enabled Remove All Programs list from the Start

>> > > > menu Enabled Remove and prevent access to the Shut Down

>> > > > command Enabled Remove Clock from the system notification

>> > > > area Enabled Remove Documents menu from Start Menu

>> > > > Enabled Remove Help menu from Start Menu Enabled

>> > > > Remove links and access to Windows Update Enabled

>> > > > Remove My Documents icon from Start Menu Enabled

>> > > > Remove Run menu from Start Menu Enabled

>> > > > Remove Search menu from Start Menu Enabled

>> > > >

>> > > > Windows Components/Task Schedulerhide

>> > > > Policy Setting

>> > > > Prevent Task Run or End Enabled

>> > > > Prohibit New Task Creation Enabled

>> > > >

>> > > > Windows Components/Windows Messengerhide

>> > > > Policy Setting

>> > > > Do not allow Windows Messenger to be run Enabled

>> > > >

>> > > >

>> > > >

>> > > > "Vera Noest [MVP]" wrote:

>> > > >

>> > > >> Sounds like you use the same profile for client and TS

>> > > >> logons. Then the results become often unpredictable

>> > > >> (last write/save operation wins). Is also known to lead

>> > > >> to profile corruption. Make sure that you define

>> > > >> different profiles for client and TS.

>> > > >> _________________________________________________________

>> > > >> Vera Noest

>> > > >> MCSE, CCEA, Microsoft MVP - Terminal Server

>> > > >> TS troubleshooting: http://ts.veranoest.net

>> > > >> ___ please respond in newsgroup, NOT by private email

>> > > >> ___

>> > > >>

>> > > >> =?Utf-8?B?U3R5bGUyMw==?=

>> > > >> <Style23@discussions.microsoft.com> wrote on 21 mar 2008

>> > > >> in microsoft.public.windows.terminal_services:

>> > > >>

>> > > >> > The printer is not setup on the local client machine

>> > > >> > nor does the printer display a session when looking at

>> > > >> > the settings on the terminal server. Strange?

>> > > >> >

>> > > >> > "Support_Pmax" wrote:

>> > > >> >

>> > > >> >> Is the printer still setup on your local computer?

>> > > >> >> How is it displayed in your Printers, does it have a

>> > > >> >> session attached to it?

>> > > >> >>

>> > > >> >> "Style23" wrote:

>> > > >> >>

>> > > >> >> > I log onto a terminal server with a Roaming

>> > > >> >> > Profile. There 3 computers people log onto to

>> > > >> >> > access this one program. There is a policy set so

>> > > >> >> > the user can't do basically anything but run the

>> > > >> >> > program and go into the printer settings. My

>> > > >> >> > question is when i'm in the terminal server

>> > > >> >> > and delete this printer, once I log off and then

>> > > >> >> > log back into the terminal server the printer is

>> > > >> >> > back. The printer that i'm deleting is no longer on

>> > > >> >> > the network nor installed on the computer it was

>> > > >> >> > locally hooked up to. I deleted the registry key

>> > > >> >> > which holds the printer setting and it comes back,

>> > > >> >> > once I log off and log back on. Basically any

>> > > >> >> > change that I make with in the terminal

>> > > >> >> > server while i'm roaming it will not save. I have

>> > > >> >> > administrator rights and a GPO is applied to the 3

>> > > >> >> > computer but for my username the GPO doesn't apply

>> > > >> >> > to me. If I log on locally I can add and delete a

>> > > >> >> > printer and it will save, but for roaming it

>> > > >> >> > reverts back to an old setting. Any answers to this

>> > > >> >> > problem?

>> > > >> >> >

>> > > >> >> >

>> > > >> >> >

>> > > >> >> >

>> > > >> >> >

>> > > >> >> > Client computers: Window XP

>> > > >> >> >

>> > > >> >> > Server: Windows Server 2003

 Share
Go to topic listing
×
×
  • Create New...