fresh install of XP Pro - quick question

[Guest Niteowl]

Hi,

 

I just installed a new 300G HD, partitioned it prior to rebooting to install

a fresh copy of XP Pro.

 

I have 3 physical drives now, the 2 that were in there were partitioned as

C: G: H:, and D: E: F: (not sure why it was like that)

 

Before installing XP I copied All data from D thru H onto the new SATA drive

which I had partitioned into I: J: K:, leaving I: as a primary/active

partition, and J: and K: as logical drives.

 

When I booted up from the XP CD, I deleted and repartitioned the 2 120G

HD's, and also deleted the I: drive and repartitioned it so it would take on

the C: nomenclature, which it did.

 

When I started it to formatting, it did the D: drive first, I'm not sure why

but I let it go while I was doing other things elsewhere.

 

When it finished installing Windows, it booted up and then I was going in to

change the drive letters to be what I wanted... the new drive I wanted to be

C: D: and E:(it was C: J: & K:), but the D: drive (first partition on one of

the 120G drives wouldn't let me change it and said it was a boot drive.

??????

 

I looked at the contents of D: and it has the boot.ini, ntldr, and the

NTDETECT.COM files on it in addition to only the "System volume Information"

folder. No idea why it did this. Is this normal behavior? Is it possible

to simply move those files on to the C: drive, or do I have to completely

reinstall XP again, or will it do the same thing again?

 

Only thing I can think of to disconnect the secondary drives till I get XP

installed if there's no way to easily fix this.

 

 

thanks,

niteowl

[Guest Niteowl]

Re: fresh install of XP Pro - quick question

 

just had a thought.. if I just edited the boot.ini, and then put it on the

C: drive, would that work?

 

here's the boot.ini:

 

[boot loader]

timeout=1

default=multi(0)disk(0)rdisk(2)partition(1)\WINDOWS

[operating systems]

multi(0)disk(0)rdisk(2)partition(1)\WINDOWS="Microsoft Windows XP

Professional" /noexecute=optin /fastdetect

 

what would I need to change? (just change the "rdisk(2)" to "rdisk(1)" )

??

 

thanks,

niteowl

 

 

 

"Niteowl" <me@somewhere.com> wrote in message

news:evZvdbUjIHA.5956@TK2MSFTNGP03.phx.gbl...

> Hi,

>

> I just installed a new 300G HD, partitioned it prior to rebooting to

> install a fresh copy of XP Pro.

>

> I have 3 physical drives now, the 2 that were in there were partitioned as

> C: G: H:, and D: E: F: (not sure why it was like that)

>

> Before installing XP I copied All data from D thru H onto the new SATA

> drive which I had partitioned into I: J: K:, leaving I: as a

> primary/active partition, and J: and K: as logical drives.

>

> When I booted up from the XP CD, I deleted and repartitioned the 2 120G

> HD's, and also deleted the I: drive and repartitioned it so it would take

> on the C: nomenclature, which it did.

>

> When I started it to formatting, it did the D: drive first, I'm not sure

> why but I let it go while I was doing other things elsewhere.

>

> When it finished installing Windows, it booted up and then I was going in

> to change the drive letters to be what I wanted... the new drive I wanted

> to be C: D: and E:(it was C: J: & K:), but the D: drive (first partition

> on one of the 120G drives wouldn't let me change it and said it was a boot

> drive. ??????

>

> I looked at the contents of D: and it has the boot.ini, ntldr, and the

> NTDETECT.COM files on it in addition to only the "System volume

> Information" folder. No idea why it did this. Is this normal behavior?

> Is it possible to simply move those files on to the C: drive, or do I have

> to completely reinstall XP again, or will it do the same thing again?

>

> Only thing I can think of to disconnect the secondary drives till I get XP

> installed if there's no way to easily fix this.

>

>

> thanks,

> niteowl

>

>

>

[Guest Big Al]

Re: fresh install of XP Pro - quick question

 

Niteowl wrote:

> Hi,

>

> I just installed a new 300G HD, partitioned it prior to rebooting to install

> a fresh copy of XP Pro.

>

> I have 3 physical drives now, the 2 that were in there were partitioned as

> C: G: H:, and D: E: F: (not sure why it was like that)

>

> Before installing XP I copied All data from D thru H onto the new SATA drive

> which I had partitioned into I: J: K:, leaving I: as a primary/active

> partition, and J: and K: as logical drives.

>

> When I booted up from the XP CD, I deleted and repartitioned the 2 120G

> HD's, and also deleted the I: drive and repartitioned it so it would take on

> the C: nomenclature, which it did.

>

> When I started it to formatting, it did the D: drive first, I'm not sure why

> but I let it go while I was doing other things elsewhere.

>

> When it finished installing Windows, it booted up and then I was going in to

> change the drive letters to be what I wanted... the new drive I wanted to be

> C: D: and E:(it was C: J: & K:), but the D: drive (first partition on one of

> the 120G drives wouldn't let me change it and said it was a boot drive.

> ??????

>

> I looked at the contents of D: and it has the boot.ini, ntldr, and the

> NTDETECT.COM files on it in addition to only the "System volume Information"

> folder. No idea why it did this. Is this normal behavior? Is it possible

> to simply move those files on to the C: drive, or do I have to completely

> reinstall XP again, or will it do the same thing again?

>

> Only thing I can think of to disconnect the secondary drives till I get XP

> installed if there's no way to easily fix this.

>

>

> thanks,

> niteowl

>

>

>

You'll probably get more ideas, but I'm a back to basics person.

Especially if I have a tricky situation. Comes from days of hardware

tech. Remove everything but the MB and PS and then see if the basics work.

I would boot from the CD with only the 1 drive as master that I want to

load. One to prevent me from screwing up anything and 2, just

because. Then when the install starts select the drive, delete the

partition, remake it, and label it as C:. Then load the OS and get it

up. Once up, shutdown and add the other hardware and reboot. You can

change drive letters all you want in XP. PS. I keep an old win98 boot

floppy with fdisk and format on it too just for the heck of it.

 

Hope you get better ideas. Good luck.

[Guest Niteowl]

Re: fresh install of XP Pro - quick question

 

 

"Niteowl" <me@somewhere.com> wrote in message

news:evZvdbUjIHA.5956@TK2MSFTNGP03.phx.gbl...

> Hi,

>

> I just installed a new 300G HD, partitioned it prior to rebooting to

> install a fresh copy of XP Pro.

>

> I have 3 physical drives now, the 2 that were in there were partitioned as

> C: G: H:, and D: E: F: (not sure why it was like that)

>

> Before installing XP I copied All data from D thru H onto the new SATA

> drive which I had partitioned into I: J: K:, leaving I: as a

> primary/active partition, and J: and K: as logical drives.

>

> When I booted up from the XP CD, I deleted and repartitioned the 2 120G

> HD's, and also deleted the I: drive and repartitioned it so it would take

> on the C: nomenclature, which it did.

>

> When I started it to formatting, it did the D: drive first, I'm not sure

> why but I let it go while I was doing other things elsewhere.

>

> When it finished installing Windows, it booted up and then I was going in

> to change the drive letters to be what I wanted... the new drive I wanted

> to be C: D: and E:(it was C: J: & K:), but the D: drive (first partition

> on one of the 120G drives wouldn't let me change it and said it was a boot

> drive. ??????

>

> I looked at the contents of D: and it has the boot.ini, ntldr, and the

> NTDETECT.COM files on it in addition to only the "System volume

> Information" folder. No idea why it did this. Is this normal behavior?

> Is it possible to simply move those files on to the C: drive, or do I have

> to completely reinstall XP again, or will it do the same thing again?

>

> Only thing I can think of to disconnect the secondary drives till I get XP

> installed if there's no way to easily fix this.

 

 

I tried editing the boot.ini file and moving it to the C: drive, it would

not work, so perhaps there's a registry hack that would make this work????

 

I have reinstalled XP again, and it did the same thing, would not let me

continue without writing to the D: drive... (secondary drive)

I'm not sure why unless it has something to do with the fact that the other

2 partitions on the main drive are logical drives.. still ..... why won't it

just write to the C: drive?

 

I'm hoping there's a registry edit or something rather than digging this box

out and physically removing the other two drives.. I can't format those

partitions as it is all my data files from the previous life of this box.

tons of mp3's, avi's, archived programs, etc.

 

Anyone have a fix for this??

 

thanks,

niteowl

[Guest Andy]

Re: fresh install of XP Pro - quick question

 

On Sun, 23 Mar 2008 23:10:12 -0400, "Niteowl" <me@somewhere.com>

wrote:

>

>"Niteowl" <me@somewhere.com> wrote in message

>news:evZvdbUjIHA.5956@TK2MSFTNGP03.phx.gbl...

>> Hi,

>>

>> I just installed a new 300G HD, partitioned it prior to rebooting to

>> install a fresh copy of XP Pro.

>>

>> I have 3 physical drives now, the 2 that were in there were partitioned as

>> C: G: H:, and D: E: F: (not sure why it was like that)

>>

>> Before installing XP I copied All data from D thru H onto the new SATA

>> drive which I had partitioned into I: J: K:, leaving I: as a

>> primary/active partition, and J: and K: as logical drives.

>>

>> When I booted up from the XP CD, I deleted and repartitioned the 2 120G

>> HD's, and also deleted the I: drive and repartitioned it so it would take

>> on the C: nomenclature, which it did.

>>

>> When I started it to formatting, it did the D: drive first, I'm not sure

>> why but I let it go while I was doing other things elsewhere.

>>

>> When it finished installing Windows, it booted up and then I was going in

>> to change the drive letters to be what I wanted... the new drive I wanted

>> to be C: D: and E:(it was C: J: & K:), but the D: drive (first partition

>> on one of the 120G drives wouldn't let me change it and said it was a boot

>> drive. ??????

>>

>> I looked at the contents of D: and it has the boot.ini, ntldr, and the

>> NTDETECT.COM files on it in addition to only the "System volume

>> Information" folder. No idea why it did this. Is this normal behavior?

>> Is it possible to simply move those files on to the C: drive, or do I have

>> to completely reinstall XP again, or will it do the same thing again?

>>

>> Only thing I can think of to disconnect the secondary drives till I get XP

>> installed if there's no way to easily fix this.

>

>

>I tried editing the boot.ini file and moving it to the C: drive, it would

>not work, so perhaps there's a registry hack that would make this work????

>

>I have reinstalled XP again, and it did the same thing, would not let me

>continue without writing to the D: drive... (secondary drive)

>I'm not sure why unless it has something to do with the fact that the other

>2 partitions on the main drive are logical drives.. still ..... why won't it

>just write to the C: drive?

 

Go into motherboard BIOS setup, Hard Disk Boot Priority

(Award/Phoenix) or Hard Disk Drives (AMI) setting, and move the SATA

disk to the top of the list of drives. This should tell Windows setup

that the SATA is the drive that the motherboard boots from, making its

active primary partition the Windows system partition where the boot

files should be placed..

>

>I'm hoping there's a registry edit or something rather than digging this box

>out and physically removing the other two drives.. I can't format those

>partitions as it is all my data files from the previous life of this box.

>tons of mp3's, avi's, archived programs, etc.

>

>Anyone have a fix for this??

>

>thanks,

>niteowl

>

[Guest Niteowl]

Re: fresh install of XP Pro - quick question

 

 

"Andy" <1@2.3> wrote in message

news:ohneu35cir0rve86lj103ignkk3hecu2j1@4ax.com...

> On Sun, 23 Mar 2008 23:10:12 -0400, "Niteowl" <me@somewhere.com>

> wrote:

>

>>

>>"Niteowl" <me@somewhere.com> wrote in message

>>news:evZvdbUjIHA.5956@TK2MSFTNGP03.phx.gbl...

>>> Hi,

>>>

>>> I just installed a new 300G HD, partitioned it prior to rebooting to

>>> install a fresh copy of XP Pro.

>>>

>>> I have 3 physical drives now, the 2 that were in there were partitioned

>>> as

>>> C: G: H:, and D: E: F: (not sure why it was like that)

>>>

>>> Before installing XP I copied All data from D thru H onto the new SATA

>>> drive which I had partitioned into I: J: K:, leaving I: as a

>>> primary/active partition, and J: and K: as logical drives.

>>>

>>> When I booted up from the XP CD, I deleted and repartitioned the 2 120G

>>> HD's, and also deleted the I: drive and repartitioned it so it would

>>> take

>>> on the C: nomenclature, which it did.

>>>

>>> When I started it to formatting, it did the D: drive first, I'm not sure

>>> why but I let it go while I was doing other things elsewhere.

>>>

>>> When it finished installing Windows, it booted up and then I was going

>>> in

>>> to change the drive letters to be what I wanted... the new drive I

>>> wanted

>>> to be C: D: and E:(it was C: J: & K:), but the D: drive (first partition

>>> on one of the 120G drives wouldn't let me change it and said it was a

>>> boot

>>> drive. ??????

>>>

>>> I looked at the contents of D: and it has the boot.ini, ntldr, and the

>>> NTDETECT.COM files on it in addition to only the "System volume

>>> Information" folder. No idea why it did this. Is this normal behavior?

>>> Is it possible to simply move those files on to the C: drive, or do I

>>> have

>>> to completely reinstall XP again, or will it do the same thing again?

>>>

>>> Only thing I can think of to disconnect the secondary drives till I get

>>> XP

>>> installed if there's no way to easily fix this.

>>

>>

>>I tried editing the boot.ini file and moving it to the C: drive, it would

>>not work, so perhaps there's a registry hack that would make this work????

>>

>>I have reinstalled XP again, and it did the same thing, would not let me

>>continue without writing to the D: drive... (secondary drive)

>>I'm not sure why unless it has something to do with the fact that the

>>other

>>2 partitions on the main drive are logical drives.. still ..... why won't

>>it

>>just write to the C: drive?

>

> Go into motherboard BIOS setup, Hard Disk Boot Priority

> (Award/Phoenix) or Hard Disk Drives (AMI) setting, and move the SATA

> disk to the top of the list of drives. This should tell Windows setup

> that the SATA is the drive that the motherboard boots from, making its

> active primary partition the Windows system partition where the boot

> files should be placed..

 

Changed the order of priority,

booted up from the XP CD

 

the SATA drive appear in the list first, but the drive letter is E: on the

first partition,

 

the C: designation is on the second HD in the list

 

I removed the first partition on the SATA, leaving the other two alone, and

removed all partitions on the other 2 ATA drives, Maxtor 120G (2 equal

partitions each).

 

chose the first partition on the SATA to install XP to, and got the same

following screen as before:

 

"To install Windows XP on the partition you selected,

Setup must write some files to the following disk:

117240 MB Disk 0 at Id 0 on bus 0 on atapi [MBR]

However, this disk does not contain a Windows XP-compatible partition.

To continue installing Windows XP, return to the windows partition selection

screen and create a Window XP compatible partition on the disk above. If

there is no free space on the disk, delete any existing partition and then

create a new one.

To return to the partition selection screen, press ENTER."

 

for some reason setup still thinks that 120G drive's first partition is the

C: drive.. ??? Could it be something left over from before?

 

I used Maxblast to setup the drives as single partition drives, it would not

allow me to setup both of them as "additional storage", it insisted on

making the primary master IDE drive the boot drive.. and when I booted up

with the XP CD, the list of drives confirmed that indeed the C: drive was

the primary master 120G drive, the D: drive was the secondary 120G drive,

and my SATA with 3 partitions was E:, F:, & G:. :(

 

so I guess my only recourse is to eliminate those drives until I get the O/S

installed. I'm trying that now.

 

thanks for the suggestion though, I was hoping it would've worked too.. :)

 

we'll see what happens...

 

>>I'm hoping there's a registry edit or something rather than digging this

>>box

>>out and physically removing the other two drives.. I can't format those

>>partitions as it is all my data files from the previous life of this box.

>>tons of mp3's, avi's, archived programs, etc.

>>

>>Anyone have a fix for this??

>>

>>thanks,

>>niteowl

>>

[Guest Niteowl]

Re: fresh install of XP Pro - quick question

 

Hi Andy and all,

 

disconnected the 2 120G hd's and XP installed perfectly assigning C, D, & E

drive letters as I wanted in the first place.

 

plugged back in the 2 secondary drives and they were assigned the

appropriate letters also...

 

Thanks for the suggestions..

 

thanks again,

niteowl

 

 

"Niteowl" <me@somewhere.com> wrote in message

news:%23qoOwIbjIHA.4344@TK2MSFTNGP03.phx.gbl...

>

> "Andy" <1@2.3> wrote in message

> news:ohneu35cir0rve86lj103ignkk3hecu2j1@4ax.com...

>> On Sun, 23 Mar 2008 23:10:12 -0400, "Niteowl" <me@somewhere.com>

>> wrote:

>>

>>>

>>>"Niteowl" <me@somewhere.com> wrote in message

>>>news:evZvdbUjIHA.5956@TK2MSFTNGP03.phx.gbl...

>>>> Hi,

>>>>

>>>> I just installed a new 300G HD, partitioned it prior to rebooting to

>>>> install a fresh copy of XP Pro.

>>>>

>>>> I have 3 physical drives now, the 2 that were in there were partitioned

>>>> as

>>>> C: G: H:, and D: E: F: (not sure why it was like that)

>>>>

>>>> Before installing XP I copied All data from D thru H onto the new SATA

>>>> drive which I had partitioned into I: J: K:, leaving I: as a

>>>> primary/active partition, and J: and K: as logical drives.

>>>>

>>>> When I booted up from the XP CD, I deleted and repartitioned the 2 120G

>>>> HD's, and also deleted the I: drive and repartitioned it so it would

>>>> take

>>>> on the C: nomenclature, which it did.

>>>>

>>>> When I started it to formatting, it did the D: drive first, I'm not

>>>> sure

>>>> why but I let it go while I was doing other things elsewhere.

>>>>

>>>> When it finished installing Windows, it booted up and then I was going

>>>> in

>>>> to change the drive letters to be what I wanted... the new drive I

>>>> wanted

>>>> to be C: D: and E:(it was C: J: & K:), but the D: drive (first

>>>> partition

>>>> on one of the 120G drives wouldn't let me change it and said it was a

>>>> boot

>>>> drive. ??????

>>>>

>>>> I looked at the contents of D: and it has the boot.ini, ntldr, and the

>>>> NTDETECT.COM files on it in addition to only the "System volume

>>>> Information" folder. No idea why it did this. Is this normal

>>>> behavior?

>>>> Is it possible to simply move those files on to the C: drive, or do I

>>>> have

>>>> to completely reinstall XP again, or will it do the same thing again?

>>>>

>>>> Only thing I can think of to disconnect the secondary drives till I get

>>>> XP

>>>> installed if there's no way to easily fix this.

>>>

>>>

>>>I tried editing the boot.ini file and moving it to the C: drive, it would

>>>not work, so perhaps there's a registry hack that would make this

>>>work????

>>>

>>>I have reinstalled XP again, and it did the same thing, would not let me

>>>continue without writing to the D: drive... (secondary drive)

>>>I'm not sure why unless it has something to do with the fact that the

>>>other

>>>2 partitions on the main drive are logical drives.. still ..... why won't

>>>it

>>>just write to the C: drive?

>>

>> Go into motherboard BIOS setup, Hard Disk Boot Priority

>> (Award/Phoenix) or Hard Disk Drives (AMI) setting, and move the SATA

>> disk to the top of the list of drives. This should tell Windows setup

>> that the SATA is the drive that the motherboard boots from, making its

>> active primary partition the Windows system partition where the boot

>> files should be placed..

>

> Changed the order of priority,

> booted up from the XP CD

>

> the SATA drive appear in the list first, but the drive letter is E: on the

> first partition,

>

> the C: designation is on the second HD in the list

>

> I removed the first partition on the SATA, leaving the other two alone,

> and removed all partitions on the other 2 ATA drives, Maxtor 120G (2 equal

> partitions each).

>

> chose the first partition on the SATA to install XP to, and got the same

> following screen as before:

>

> "To install Windows XP on the partition you selected,

> Setup must write some files to the following disk:

> 117240 MB Disk 0 at Id 0 on bus 0 on atapi [MBR]

> However, this disk does not contain a Windows XP-compatible partition.

> To continue installing Windows XP, return to the windows partition

> selection screen and create a Window XP compatible partition on the disk

> above. If there is no free space on the disk, delete any existing

> partition and then create a new one.

> To return to the partition selection screen, press ENTER."

>

> for some reason setup still thinks that 120G drive's first partition is

> the C: drive.. ??? Could it be something left over from before?

>

> I used Maxblast to setup the drives as single partition drives, it would

> not allow me to setup both of them as "additional storage", it insisted on

> making the primary master IDE drive the boot drive.. and when I booted up

> with the XP CD, the list of drives confirmed that indeed the C: drive was

> the primary master 120G drive, the D: drive was the secondary 120G drive,

> and my SATA with 3 partitions was E:, F:, & G:. :(

>

> so I guess my only recourse is to eliminate those drives until I get the

> O/S installed. I'm trying that now.

>

> thanks for the suggestion though, I was hoping it would've worked too.. :)

>

> we'll see what happens...

>

>

>>>I'm hoping there's a registry edit or something rather than digging this

>>>box

>>>out and physically removing the other two drives.. I can't format those

>>>partitions as it is all my data files from the previous life of this box.

>>>tons of mp3's, avi's, archived programs, etc.

>>>

>>>Anyone have a fix for this??

>>>

>>>thanks,

>>>niteowl

>>>

>

>