Problems with USB User printing in 2003 TS

[Guest JH]

Hello,

I have a situation where if I log in to my 2003 SP1 TS server as domain

admin, I can see the USB HP 1505N redirected printer in the listing. If I

print a test page it works then I log off and the printers are deleted with

the session.

When I log in as a regular user, I see the printer redirected and I go to

print a test page and it doesn't get to the printer. It shows in the queue as

a job pending but never completes. If I try and cancel the job it will just

show deleting so then I try to log off the session and it never completes, it

just shows saving settings in the window. For me to get the printing working

again, I have to log back in as admin, restart the print spool service then

delete the 1505N printer from the last session that was created when logged

in as the regular user. I have a 2000 Terminal server that works just fine

whether it is an admin or regular user.

To add to this, both servers are using the same driver that is installed on

the local machine that has the printer installed on it.

Please let me know if you have any suggestions,

Thanks - JH

[Guest Vera Noest [MVP]]

Re: Problems with USB User printing in 2003 TS

 

Sounds like a driver which is incompatible with TS.

Are you using driver version 61.036.351.00? That's the version of

the driver which is tested by HP for use on TS.

 

HP Printers Supported in Citrix MetaFrame Presentation and Terminal

Server Environments

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?

objectID=c00213455

_________________________________________________________

Vera Noest

MCSE, CCEA, Microsoft MVP - Terminal Server

TS troubleshooting: http://ts.veranoest.net

*----------- Please reply in newsgroup -------------*

 

=?Utf-8?B?Skg=?= <JH@discussions.microsoft.com> wrote on 31 mar

2008:

> Hello,

> I have a situation where if I log in to my 2003 SP1 TS server as

> domain admin, I can see the USB HP 1505N redirected printer in

> the listing. If I print a test page it works then I log off and

> the printers are deleted with the session.

> When I log in as a regular user, I see the printer redirected

> and I go to print a test page and it doesn't get to the printer.

> It shows in the queue as a job pending but never completes. If I

> try and cancel the job it will just show deleting so then I try

> to log off the session and it never completes, it just shows

> saving settings in the window. For me to get the printing

> working again, I have to log back in as admin, restart the print

> spool service then delete the 1505N printer from the last

> session that was created when logged in as the regular user. I

> have a 2000 Terminal server that works just fine whether it is

> an admin or regular user. To add to this, both servers are using

> the same driver that is installed on the local machine that has

> the printer installed on it. Please let me know if you have any

> suggestions, Thanks - JH

[Guest JH]

Re: Problems with USB User printing in 2003 TS

 

I downloaded what was available on the HP site for the 1505. I looked for

this driver version and saw no listing for that version. The only version

they show is 20070910.

 

 

"Vera Noest [MVP]" wrote:

> Sounds like a driver which is incompatible with TS.

> Are you using driver version 61.036.351.00? That's the version of

> the driver which is tested by HP for use on TS.

>

> HP Printers Supported in Citrix MetaFrame Presentation and Terminal

> Server Environments

> http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?

> objectID=c00213455

> _________________________________________________________

> Vera Noest

> MCSE, CCEA, Microsoft MVP - Terminal Server

> TS troubleshooting: http://ts.veranoest.net

> *----------- Please reply in newsgroup -------------*

>

> =?Utf-8?B?Skg=?= <JH@discussions.microsoft.com> wrote on 31 mar

> 2008:

>

> > Hello,

> > I have a situation where if I log in to my 2003 SP1 TS server as

> > domain admin, I can see the USB HP 1505N redirected printer in

> > the listing. If I print a test page it works then I log off and

> > the printers are deleted with the session.

> > When I log in as a regular user, I see the printer redirected

> > and I go to print a test page and it doesn't get to the printer.

> > It shows in the queue as a job pending but never completes. If I

> > try and cancel the job it will just show deleting so then I try

> > to log off the session and it never completes, it just shows

> > saving settings in the window. For me to get the printing

> > working again, I have to log back in as admin, restart the print

> > spool service then delete the 1505N printer from the last

> > session that was created when logged in as the regular user. I

> > have a 2000 Terminal server that works just fine whether it is

> > an admin or regular user. To add to this, both servers are using

> > the same driver that is installed on the local machine that has

> > the printer installed on it. Please let me know if you have any

> > suggestions, Thanks - JH

>

[Guest Douglas Brantley]

Re: Problems with USB User printing in 2003 TS

 

> I downloaded what was available on the HP site for the 1505. I looked for

> this driver version and saw no listing for that version. The only version

> they show is 20070910.

 

I have been down this road....

 

I attempted to get the HP LaserJet P1505 running under Terminal Services

(2003).

 

It failed.

 

I talked to the HP Support staff.

 

They acknowledged the failure of the "20070910" driver for the HP LaserJet

P1505.

 

They told me the problem is well documented in the HP Support Knowledge Base.

 

The solution they gave us is to install the HP LaserJet 6L driver.

 

I tried the LaserJet 6L driver and could not get it to work.

 

You may want to try it.

[Guest JH]

Re: Problems with USB User printing in 2003 TS

 

Thanks Douglas,

Were you not able to get the printer to work at all? I am able to use it

fine for the admins but when a user connect, it doesn't work. I will give

this driver a try,

 

Thanks

 

"Douglas Brantley" wrote:

>

> > I downloaded what was available on the HP site for the 1505. I looked for

> > this driver version and saw no listing for that version. The only version

> > they show is 20070910.

>

> I have been down this road....

>

> I attempted to get the HP LaserJet P1505 running under Terminal Services

> (2003).

>

> It failed.

>

> I talked to the HP Support staff.

>

> They acknowledged the failure of the "20070910" driver for the HP LaserJet

> P1505.

>

> They told me the problem is well documented in the HP Support Knowledge Base.

>

> The solution they gave us is to install the HP LaserJet 6L driver.

>

> I tried the LaserJet 6L driver and could not get it to work.

>

> You may want to try it.

[Guest Douglas Brantley]

Re: Problems with USB User printing in 2003 TS

 

 

> Were you not able to get the printer to work at all? I am able to use it

> fine for the admins but when a user connect, it doesn't work. I will give

> this driver a try,

 

Yes, but it was not consistent irregardless of Privs.

 

As you know, the users do not take well to inconsistent printing.

 

I recommended the client purchase more LaserJet 1022 printers.

 

They have several of the 1002 models and they work without error.

 

The key to success is getting the same version of the driver on the desktop

PC and hte driver on the TS server.

 

With the LaserJet P1505 success was never found.

[Guest JH]

Re: Problems with USB User printing in 2003 TS

 

Hello Douglas, thanks for the replies.

 

Is this a 2003 SP1 specific issue? I installed the 6L driver and if connect

to my Windows 2000 TS server, it works fine. It's only when I try and connect

back to the my 2003 SP1 TS server it messes up. When I installed the 6L

driver, I no longer see it being redirected to the 03 server. I have the same

driver on my laptop as well.

 

Thanks

 

"Douglas Brantley" wrote:

>

>

> > Were you not able to get the printer to work at all? I am able to use it

> > fine for the admins but when a user connect, it doesn't work. I will give

> > this driver a try,

>

> Yes, but it was not consistent irregardless of Privs.

>

> As you know, the users do not take well to inconsistent printing.

>

> I recommended the client purchase more LaserJet 1022 printers.

>

> They have several of the 1002 models and they work without error.

>

> The key to success is getting the same version of the driver on the desktop

> PC and hte driver on the TS server.

>

> With the LaserJet P1505 success was never found.

>

>

[Guest jeff2674@gmail.com]

Re: Problems with USB User printing in 2003 TS

 

On Mar 31, 10:19 pm, JH <J...@discussions.microsoft.com> wrote:

> Hello Douglas, thanks for the replies.

>

> Is this a 2003 SP1 specific issue? I installed the 6L driver and if connect

> to my Windows 2000 TS server, it works fine. It's only when I try and connect

> back to the my 2003 SP1 TS server it messes up. When I installed the 6L

> driver, I no longer see it being redirected to the 03 server. I have the same

> driver on my laptop as well.

>

> Thanks

>

>

>

> "Douglas Brantley" wrote:

>

> > > Were you not able to get the printer to work at all? I am able to use it

> > > fine for the admins but when a user connect, it doesn't work. I will give

> > > this driver a try,

>

> > Yes, but it was not consistent irregardless of Privs.

>

> > As you know, the users do not take well to inconsistent printing.

>

> > I recommended the client purchase more LaserJet 1022 printers.

>

> > They have several of the 1002 models and they work without error.

>

> > The key to success is getting the same version of the driver on the desktop

> > PC and hte driver on the TS server.

>

> > With the LaserJetP1505success was never found.- Hide quoted text -

>

> - Show quoted text -

 

How did you get it to work with Windows 2000 TS? I can't with using

the p1505, 6L or universal print driver. The only way I can get it to

print locally is by using the p1505 driver as well.

[Guest JH]

Re: Problems with USB User printing in 2003 TS

 

Which OS does your client have? I downloaded the Windows XP (which covered

2000) driver that is on the HP Website and installed that same driver on the

server. This worked for the 6L driver as well.

 

I ordered a 1022 and have my fingers crossed.

 

"jeff2674@gmail.com" wrote:

> On Mar 31, 10:19 pm, JH <J...@discussions.microsoft.com> wrote:

> > Hello Douglas, thanks for the replies.

> >

> > Is this a 2003 SP1 specific issue? I installed the 6L driver and if connect

> > to my Windows 2000 TS server, it works fine. It's only when I try and connect

> > back to the my 2003 SP1 TS server it messes up. When I installed the 6L

> > driver, I no longer see it being redirected to the 03 server. I have the same

> > driver on my laptop as well.

> >

> > Thanks

> >

> >

> >

> > "Douglas Brantley" wrote:

> >

> > > > Were you not able to get the printer to work at all? I am able to use it

> > > > fine for the admins but when a user connect, it doesn't work. I will give

> > > > this driver a try,

> >

> > > Yes, but it was not consistent irregardless of Privs.

> >

> > > As you know, the users do not take well to inconsistent printing.

> >

> > > I recommended the client purchase more LaserJet 1022 printers.

> >

> > > They have several of the 1002 models and they work without error.

> >

> > > The key to success is getting the same version of the driver on the desktop

> > > PC and hte driver on the TS server.

> >

> > > With the LaserJetP1505success was never found.- Hide quoted text -

> >

> > - Show quoted text -

>

> How did you get it to work with Windows 2000 TS? I can't with using

> the p1505, 6L or universal print driver. The only way I can get it to

> print locally is by using the p1505 driver as well.

>