Guest Rudy Posted May 2, 2008 Posted May 2, 2008 I was given a Yr 2000 HP desktop PIII 866 w/ 384 Mb ram, running Win98SE. It has more capability than my older 1998 HP. I'm having two problems which I can't resolve. I'm connected to the Internet via ethernet cable> DLink SuperG router>cable modem. The older machine (Celeron500 256Mb) was connected to the net via a USB connection as the installer couldnt get (he tried) a 10/100 hard card to function (Port conflicts he said). Given that, the connection was reasonably fast but the machine did have 'falling offline" problems, especially if left alone/inactive for a while. During D/L though (say 25 parts x 309 Mb .WMV files) it was fast and smooth..1 0f 25, 2 of 25, 3 of 25 etc right up to 25, On the PIII, I installed a new (er) PCI 10/100 card [pitched the original ISA one]and got it running pretty well but it does "hang" from time to time during downloads. Where this is most evident is trying to Update my NEWSGROUP list of some 60,000 groups..it will usually hang at 140 groups..if I keep hitting reset, on occasion it will grab up to 6500 groups but then hangs again. Trying to D/L the same 25 part (309Mb X 25 .WMV files) may get one or two parts then it just hangs..I have to hit STOP and start again. It is nearly impossible to D/L even one part intact w/o it hanging. It also shows up when my AVG is updating..it hangs for probably 25 seconds or more during the D/L, then finishes uinlike my other P4Laptop D/L of larger files such as JPGs stalls & stutters as well...about 1/10th the D/L spd of my P4 laptop on the same network So, what I'm wondering is, can I reinstall Win98SE off the disk I have without LOSING the drivers etc for other hardware (such as the PCI 10/100card- I left the disks for that in Az and I'm 1600 miles away now) and other software/drivers 'onboard' which I can't replace ? Are there "sections" of the Win98 I should leave alone and others I should replace ? The other problem, I ve posted here [DKabppls.exe] deals with FREEZING on shutdown and 2 UNTITLED windows appearing "..stopped responding" WAIT/END TASK ? both resulting on an extended freeze and finally a POWER DOWN shut down. Any ideas appreciated. R
Guest Jeff Richards Posted May 2, 2008 Posted May 2, 2008 Re: Re-Install Win98SE ? You can't easily reinstall parts of the system. You could do a reinstall from within Windows and the existing system setup (including all drivers) will not be disturbed unless some part is corrupted and gets replaced. However your system is likely considerably updated from the original, and you may find that it actually reverts to older versions of certain files, requiring the reinstallation of upgrades, and all the complexities of mismatched versions. I wouldn't recommend trying to reinstall. You can remove all your network connections and start the network setup over from scratch. This effectively reinstalls most of the network components. Note that you can probably download drivers for al your devices from the www - this would be a worthwhile exercise in any case, especially for the NIC, to ensure you have the most recent version. Is the Celeron still available for testing your connection? This is to rule out the possibility that the ISP made some changes affecting your downloads at about the time that you switched machines. My first test, however, would be to retrieve that older ISA card and use it instead, or see if you can get the original USB connection set up on the new machine. It's a process of ruling out certain components by substituting others. For the processes that won't close, use task manager to identify what's running and shut down certain tasks before closing the machine. Log the steps carefully so you know what has an affect on shutdown and what doesn't. See here for a description of removing and re-instating processes that run on the machine: http://support.microsoft.com/kb/192926 -- Jeff Richards MS MVP (Windows - Shell/User) "Rudy" <NotHere@noway.net> wrote in message news:%23kG0JqJrIHA.4904@TK2MSFTNGP03.phx.gbl... >I was given a Yr 2000 HP desktop PIII 866 w/ 384 Mb ram, running Win98SE. > It has more capability than my older 1998 HP. > > I'm having two problems which I can't resolve. I'm connected to the > Internet via ethernet cable> DLink SuperG router>cable modem. > > The older machine (Celeron500 256Mb) was connected to the net via a USB > connection as the installer couldnt get (he tried) a 10/100 hard card to > function (Port conflicts he said). Given that, the connection was > reasonably fast but the machine did have 'falling offline" problems, > especially if left alone/inactive for a while. During D/L though (say 25 > parts x 309 Mb .WMV files) it was fast and smooth..1 0f 25, 2 of 25, 3 of > 25 > etc right up to 25, > > On the PIII, I installed a new (er) PCI 10/100 card [pitched the original > ISA one]and got it running pretty well but it does "hang" from time to > time > during downloads. Where this is most evident is trying to Update my > NEWSGROUP list of some 60,000 groups..it will usually hang at 140 > groups..if > I keep hitting reset, on occasion it will grab up to 6500 groups but then > hangs again. > > Trying to D/L the same 25 part (309Mb X 25 .WMV files) may get one or > two > parts then it just hangs..I have to hit STOP and start again. It is > nearly > impossible to D/L even one part intact w/o it hanging. > > It also shows up when my AVG is updating..it hangs for probably 25 seconds > or more during the D/L, then finishes uinlike my other P4Laptop > > D/L of larger files such as JPGs stalls & stutters as well...about 1/10th > the D/L spd of my P4 laptop on the same network > > So, what I'm wondering is, can I reinstall Win98SE off the disk I have > without LOSING the drivers etc for other hardware (such as the PCI > 10/100card- I left the disks for that in Az and I'm 1600 miles away now) > and > other software/drivers 'onboard' which I can't replace ? Are there > "sections" of the Win98 I should leave alone and others I should replace ? > > > The other problem, I ve posted here [DKabppls.exe] deals with FREEZING on > shutdown and 2 UNTITLED windows appearing "..stopped responding" > WAIT/END > TASK ? both resulting on an extended freeze and finally a POWER DOWN shut > down. > > Any ideas appreciated. > > R > >
Guest philo Posted May 2, 2008 Posted May 2, 2008 Re: Re-Install Win98SE ? Rudy wrote: > I was given a Yr 2000 HP desktop PIII 866 w/ 384 Mb ram, running Win98SE. > It has more capability than my older 1998 HP. > > I'm having two problems which I can't resolve. I'm connected to the > Internet via ethernet cable> DLink SuperG router>cable modem. > > The older machine (Celeron500 256Mb) was connected to the net via a USB > connection as the installer couldnt get (he tried) a 10/100 hard card to > function (Port conflicts he said). Given that, the connection was > reasonably fast but the machine did have 'falling offline" problems, > especially if left alone/inactive for a while. During D/L though (say 25 > parts x 309 Mb .WMV files) it was fast and smooth..1 0f 25, 2 of 25, 3 of 25 > etc right up to 25, > > On the PIII, I installed a new (er) PCI 10/100 card [pitched the original > ISA one]and got it running pretty well but it does "hang" from time to time > during downloads. Where this is most evident is trying to Update my > NEWSGROUP list of some 60,000 groups..it will usually hang at 140 groups..if > I keep hitting reset, on occasion it will grab up to 6500 groups but then > hangs again. > > Trying to D/L the same 25 part (309Mb X 25 .WMV files) may get one or two > parts then it just hangs..I have to hit STOP and start again. It is nearly > impossible to D/L even one part intact w/o it hanging. > > It also shows up when my AVG is updating..it hangs for probably 25 seconds > or more during the D/L, then finishes uinlike my other P4Laptop > > D/L of larger files such as JPGs stalls & stutters as well...about 1/10th > the D/L spd of my P4 laptop on the same network > > So, what I'm wondering is, can I reinstall Win98SE off the disk I have > without LOSING the drivers etc for other hardware (such as the PCI > 10/100card- I left the disks for that in Az and I'm 1600 miles away now) and > other software/drivers 'onboard' which I can't replace ? Are there > "sections" of the Win98 I should leave alone and others I should replace ? > > > The other problem, I ve posted here [DKabppls.exe] deals with FREEZING on > shutdown and 2 UNTITLED windows appearing "..stopped responding" WAIT/END > TASK ? both resulting on an extended freeze and finally a POWER DOWN shut > down. > > Any ideas appreciated. > > R > > Ahem. I have already replied to your other thread... it seems you did not read it but just re-posted an additional question plus the one that had already been answered.(With no resolution yet.) I suggest not repeating your questions and to concentrate on one problem at a time. Just wanted to say that it's usually better to solve your problems and find out what caused them in the first place. Blindly re-installing your OS without finding what caused the problem originally may leave you back at square one. Anyway to answer your question as best I can... unless you can backup your data and have access to your drivers... especially that for your net card...there would be no sense at this time to reinstall your OS. One question I have for you...did your network connection "hang" when you were using your older ISA net card?
Guest letterman@invalid.com Posted May 3, 2008 Posted May 3, 2008 Re: Re-Install Win98SE ? On Fri, 2 May 2008 14:25:56 -0700, "Rudy" <NotHere@noway.net> wrote: >I was given a Yr 2000 HP desktop PIII 866 w/ 384 Mb ram, running Win98SE. >It has more capability than my older 1998 HP. > >I'm having two problems which I can't resolve. I'm connected to the >Internet via ethernet cable> DLink SuperG router>cable modem. > There's a small utility called "Keep me Connected". It pings on an interval that you set. The purpose is too stay connected to ISPs that disconnect after no activity. It might help you, or may not. It's free, small download. Try it, it cant hurt anything. Unfortunately I have no idea where to d/l it. I've had it for years. I'm sure it's easy to find on something like Tucows.com.
Guest Rudy Posted May 3, 2008 Posted May 3, 2008 Re: Re-Install Win98SE ? Jeff Richards wrote: > I suggest not repeating your questions and to concentrate > on one problem at a time. OK, there are two threads running here but let's call the DKabppls.exe one "SOLVED" I'll be following the suggestions for removal later today > Just wanted to say that it's usually better to solve your problems and > find out what caused them in the first place. Blindly re-installing your > OS without finding what caused the problem originally may leave you back > at square one. Thats true > > Anyway to answer your question as best I can... > unless you can backup your data and have access to your drivers... > especially that for your net card... I don't. It was an old card made for (up to)Win98 and had two install floppies with it which I dont have here. It was a b*tch to get installed & running but finally it installed (after I put in the Win98 disk on 'demand'), seemingly OK and began to run ....there would be no sense at this time to reinstall your OS. I agree > > One question I have for you...did your network connection "hang" when > you were using your older ISA net card? It did seem to run in a 'jerky' manner but I wasnt really doing a lot with the 'new'/ OLD machine at the time. I suspect you are right and it isn't the new (or old)NIC that was causing the problem. We've now headed north to our 'Summer' place in Canada and I'm trying to get this one set up/cleaned up so my wife can use it. Fixed a few problems but the two I mentioned remain. I have no software for this one except what's 'onboard' and a copy of Win98SE. I can't get the RECOVERY disks from HP (Not available anymore), but there is a website that says I can still buy from them for $ 30.00 but then they want a Kings Ransom to ship to Canada. R
Guest legg Posted May 3, 2008 Posted May 3, 2008 Re: Re-Install Win98SE ? On Sat, 3 May 2008 10:29:11 -0700, "Rudy" <NotHere@noway.net> wrote: >> One question I have for you...did your network connection "hang" when >> you were using your older ISA net card? > >It did seem to run in a 'jerky' manner but I wasnt really doing a lot with >the 'new'/ OLD machine at the time. I suspect you are right and it isn't the >new (or old)NIC that was causing the problem. >We've now headed north to our 'Summer' place in Canada and I'm trying to get >this one set up/cleaned up so my wife can use it. Fixed a few problems but >the two I mentioned remain. I have no software for this one except what's >'onboard' and a copy of Win98SE. I can't get the RECOVERY disks from HP >(Not available anymore), but there is a website that says I can still buy >from them for $ 30.00 but then they want a Kings Ransom to ship to Canada. > Whats the HP model number? Have you tried querying the HP hardware forums? http://forums11.itrc.hp.com/service/forums/home.do I found these usefull for the years I spent nursing a PIII machine of similar vintage and speed. I agree that an OS reinstall is not a constructive step. Reinstalling hardware drivers recommended for the HP model, network configurations and maybe network monitoring SW or AV software might be more profitable. Keep us posted. We all learn from these issues. RL
Guest philo Posted May 3, 2008 Posted May 3, 2008 Re: Re-Install Win98SE ? <portions snipped> > OK, there are two threads running here but let's call the DKabppls.exe one > "SOLVED" > I'll be following the suggestions for removal later today Glad you are getting the machine sorted out. It's very helpful when someone such as yourself posts back to let all the folks here who have submitted suggestions... to know if those suggestions actually did the trick or not. > > Just wanted to say that it's usually better to solve your problems and > > find out what caused them in the first place. Blindly re-installing your > > OS without finding what caused the problem originally may leave you back > > at square one. > Thats true > > > > Anyway to answer your question as best I can... > > unless you can backup your data and have access to your drivers... > > especially that for your net card... > > I don't. It was an old card made for (up to)Win98 and had two install > floppies with it which I dont have here. It was a b*tch to get installed & > running but finally it installed (after I put in the Win98 disk on > 'demand'), seemingly OK and began to run <snip> > It did seem to run in a 'jerky' manner but I wasnt really doing a lot with > the 'new'/ OLD machine at the time. I suspect you are right and it isn't the > new (or old)NIC that was causing the problem. > We've now headed north to our 'Summer' place in Canada and I'm trying to get > this one set up/cleaned up so my wife can use it. Fixed a few problems but > the two I mentioned remain. I have no software for this one except what's > 'onboard' and a copy of Win98SE. I can't get the RECOVERY disks from HP > (Not available anymore), but there is a website that says I can still buy > from them for $ 30.00 but then they want a Kings Ransom to ship to Canada. > > R > > If you can't get recovery disks at a fair price... as long as you can get the drivers you need...a regular Win98se disk should do the trick
Recommended Posts