Guest A Ng Posted May 3, 2008 Posted May 3, 2008 For Win98, how rto i get to safe mode? i tried F8 (WinXp, Dell), but doesn't work. MY system is packard bell.
Guest Gary S. Terhune Posted May 3, 2008 Posted May 3, 2008 Re: How to go in safe mode? As soon as you turn on the machine, you have to repeatedly tap the F8 or Ctrl key to bring up the Startup Menu. If you repeatedly tap F5, you'll go straight into Safe Mode. Note that you repeat the taps instead of holding down the key to prevent stuck-key error, and you can't guess at the precise time to hit the key so just keep repeating for as long as it takes. If all else fails, go into Normal Mode, run MSCONFIG, click on Advanced button at lower right, and check Enable Startup menu. -- Gary S. Terhune MS-MVP Shell/User http://www.grystmill.com "A Ng" <ANg@discussions.microsoft.com> wrote in message news:A888D6A7-EA86-4AB0-9D33-05443BD072F0@microsoft.com... > For Win98, how rto i get to safe mode? i tried F8 (WinXp, Dell), but > doesn't > work. MY system is packard bell.
Guest Mart Posted May 3, 2008 Posted May 3, 2008 Re: How to go in safe mode? How to boot into Safe Mode? - The 'Official' MS method is holding down or 'stabbing at' the Ctrl OR the F8 keys, BUT you do need to do this IMMEDIATELY after you power up your PC and keep 'stabbing' at them until the splash screen shows. You could also try the same, but using the Shift key instead. Another alternative is when your machine is running in Normal Mode. Run msconfig.exe and on the General tab, select Advanced and check the 'Enable Startup Menu' box. Don't forget to uncheck the box when you've finished with it.. Mart "A Ng" <ANg@discussions.microsoft.com> wrote in message news:A888D6A7-EA86-4AB0-9D33-05443BD072F0@microsoft.com... > For Win98, how rto i get to safe mode? i tried F8 (WinXp, Dell), but > doesn't > work. MY system is packard bell.
Guest philo Posted May 3, 2008 Posted May 3, 2008 Re: How to go in safe mode? "A Ng" <ANg@discussions.microsoft.com> wrote in message news:A888D6A7-EA86-4AB0-9D33-05443BD072F0@microsoft.com... > For Win98, how rto i get to safe mode? i tried F8 (WinXp, Dell), but doesn't > work. MY system is packard bell. Correct timing is the key here. I do not suggest to continuously tap the F8 key *initially*...as you may get the "keyboard error" message The F8 (or F5) key needs to be depressed right *after* the last of the bios message has completed...yet just *prior* to the start of the operating system loading. If you are not exactly sure of the timing...it will do no harm to hit the F8 (or F5) key a few times. About the worst that will happen is that you will simply have to start over
Guest PA Bear [MS MVP] Posted May 3, 2008 Posted May 3, 2008 Re: How to go in safe mode? See http://service1.symantec.com/SUPPORT/tsgeninfo.nsf/docid/2001052409420406 -- ~Robear Dyer (PA Bear) MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002 AumHa VSOP & Admin http://aumha.net DTS-L http://dts-l.net/ A Ng wrote: > For Win98, how rto i get to safe mode? i tried F8 (WinXp, Dell), but > doesn't > work. MY system is packard bell.
Guest Gary S. Terhune Posted May 3, 2008 Posted May 3, 2008 Re: How to go in safe mode? "philo" <philo@privacy.net> wrote in message news:OPBx2STrIHA.552@TK2MSFTNGP06.phx.gbl... > > "A Ng" <ANg@discussions.microsoft.com> wrote in message > news:A888D6A7-EA86-4AB0-9D33-05443BD072F0@microsoft.com... >> For Win98, how rto i get to safe mode? i tried F8 (WinXp, Dell), but > doesn't >> work. MY system is packard bell. > > > Correct timing is the key here. > I do not suggest to continuously tap the F8 key *initially*...as you may > get > the "keyboard error" message Never happened to me in ten years of LOTS of such procedures on LOTS of different machines. Keyboard error is produced when you hold down the key for a significant period of time. That's why repeatedly tapping works. > > The F8 (or F5) key needs to be depressed right *after* the last of the > bios > message has > completed...yet just *prior* to the start of the operating system loading. Most machines don't show BIOS info, they show a stupid splash screen, and when that screen disappears, it's already too late. And even with BIOS info displayed, and with practice, finding that sweet spot is a hit/miss thing. > If you are not exactly sure of the timing...it will do no harm to hit the > F8 > (or F5) key a few times. > About the worst that will happen is that you will simply have to start > over Might as well start tapping from the beginning and be done with it. If by some miracle a keyboard error appears, my suggestion would be to tap slower. Sure easier to learn to tap than to make all of your procedures work properly. -- Gary S. Terhune MS-MVP Shell/User http://www.grystmill.com
Guest philo Posted May 3, 2008 Posted May 3, 2008 Re: How to go in safe mode? "Gary S. Terhune" <none> wrote in message news:%23EBiGiTrIHA.3616@TK2MSFTNGP06.phx.gbl... > "philo" <philo@privacy.net> wrote in message > news:OPBx2STrIHA.552@TK2MSFTNGP06.phx.gbl... > > > > "A Ng" <ANg@discussions.microsoft.com> wrote in message > > news:A888D6A7-EA86-4AB0-9D33-05443BD072F0@microsoft.com... > >> For Win98, how rto i get to safe mode? i tried F8 (WinXp, Dell), but > > doesn't > >> work. MY system is packard bell. > > > > > > Correct timing is the key here. > > I do not suggest to continuously tap the F8 key *initially*...as you may > > get > > the "keyboard error" message > > Never happened to me in ten years of LOTS of such procedures on LOTS of > different machines. Keyboard error is produced when you hold down the key > for a significant period of time. That's why repeatedly tapping works. > > > > > The F8 (or F5) key needs to be depressed right *after* the last of the > > bios > > message has > > completed...yet just *prior* to the start of the operating system loading. > > Most machines don't show BIOS info, they show a stupid splash screen, and > when that screen disappears, it's already too late. And even with BIOS info > displayed, and with practice, finding that sweet spot is a hit/miss thing. > > > If you are not exactly sure of the timing...it will do no harm to hit the > > F8 > > (or F5) key a few times. > > About the worst that will happen is that you will simply have to start > > over > > Might as well start tapping from the beginning and be done with it. If by > some miracle a keyboard error appears, my suggestion would be to tap slower. > Sure easier to learn to tap than to make all of your procedures work > properly. I agree with you 100% about those stupid bios splash screens! yuk!!! I try to disable them whenever possible. Of course with your msconfig suggestion... one can't miss!!!
Guest A Ng Posted May 3, 2008 Posted May 3, 2008 Re: How to go in safe mode? i think so tto. not like winxp > > Correct timing is the key here. > I do not suggest to continuously tap the F8 key *initially*...as you may get > the "keyboard error" message > > > The F8 (or F5) key needs to be depressed right *after* the last of the bios > message has > completed...yet just *prior* to the start of the operating system loading. > > If you are not exactly sure of the timing...it will do no harm to hit the F8 > (or F5) key a few times. > About the worst that will happen is that you will simply have to start over > > >
Guest philo Posted May 3, 2008 Posted May 3, 2008 Re: How to go in safe mode? "A Ng" <ANg@discussions.microsoft.com> wrote in message news:30993FF6-D4ED-4F0C-8455-94A09A9AE56D@microsoft.com... > > > i think so tto. not like winxp The procedure would be the same for either XP or Win98 Just tap F8 slowly
Guest glee Posted May 4, 2008 Posted May 4, 2008 Re: How to go in safe mode? "A Ng" <ANg@discussions.microsoft.com> wrote in message news:A888D6A7-EA86-4AB0-9D33-05443BD072F0@microsoft.com... > For Win98, how rto i get to safe mode? i tried F8 (WinXp, Dell), but doesn't > work. MY system is packard bell. Start the computer and HOLD DOWN the CTRL key till the Windows 98 Startup menu (boot menu) appears. ~OR~ Repeatedly tap the F8 key after the memory count to bring up the boot menu. Then use the arrow keys to select "Safe Mode", and press Enter. Also, see: http://service1.symantec.com/SUPPORT/tsgeninfo.nsf/docid/2001052409420406 -- Glen Ventura, MS MVP Windows, A+ http://dts-l.net/ http://dts-l.net/goodpost.htm
Guest letterman@invalid.com Posted May 5, 2008 Posted May 5, 2008 Re: How to go in safe mode? On Sat, 3 May 2008 08:20:48 -0700, "Gary S. Terhune" <none> wrote: >As soon as you turn on the machine, you have to repeatedly tap the F8 or >Ctrl key to bring up the Startup Menu. If you repeatedly tap F5, you'll go >straight into Safe Mode. Note that you repeat the taps instead of holding >down the key to prevent stuck-key error, and you can't guess at the precise >time to hit the key so just keep repeating for as long as it takes. > >If all else fails, go into Normal Mode, run MSCONFIG, click on Advanced >button at lower right, and check Enable Startup menu. I got one for you. I always start my computer in DOS. (I have a reason for this). When I want Windows98 I just type WIN and hit enter. OK, so I am in DOS. I want to start windows in Safe Mode. I type WIN and hit the Enter key. Now how do I get into Safe Mode? (Or do I have to replace the original msdos.sys file which loads windows upon bootup?) I saved a copy of the original, called it msdos.sy_. Then I modified the msdos.sys file, so I boot to dos. I have never been able to get into safe mode, although I have only tried a few times. Most of the time if Windows is screwed up, I just modify or replace a few files from dos, then it will load, and I may have to run Setup.exe if it's still not working right.
Guest Jeff Richards Posted May 5, 2008 Posted May 5, 2008 Re: How to go in safe mode? Don't start with WIN - use an option. WIN /D:M or /D:N Do WIN /? for the full list -- Jeff Richards MS MVP (Windows - Shell/User) <letterman@invalid.com> wrote in message news:gk5t1451fgfk84o7qsngjs13dhcmb7dl9t@4ax.com... > On Sat, 3 May 2008 08:20:48 -0700, "Gary S. Terhune" <none> wrote: > > SNIP < > I got one for you. > I always start my computer in DOS. (I have a reason for this). > When I want Windows98 I just type WIN and hit enter. > > OK, so I am in DOS. I want to start windows in Safe Mode. > I type WIN and hit the Enter key. Now how do I get into Safe Mode? > > (Or do I have to replace the original msdos.sys file which loads > windows upon bootup?) I saved a copy of the original, called it > msdos.sy_. Then I modified the msdos.sys file, so I boot to dos. > > I have never been able to get into safe mode, although I have only > tried a few times. Most of the time if Windows is screwed up, I just > modify or replace a few files from dos, then it will load, and I may > have to run Setup.exe if it's still not working right. >
Guest Old Bob Posted May 5, 2008 Posted May 5, 2008 Re: How to go in safe mode? glee;220659 Wrote: > "A Ng" ANg@discussions.microsoft.com wrote in message > news:A888D6A7-EA86-4AB0-9D33-05443BD072F0@microsoft.com...- > For Win98, how rto i get to safe mode? i tried F8 (WinXp, Dell), but > doesn't > work. MY system is packard bell.- > > > Start the computer and HOLD DOWN the CTRL key till the Windows 98 > Startup menu > (boot menu) appears. > ~OR~ > Repeatedly tap the F8 key after the memory count to bring up the boot > menu. > > Then use the arrow keys to select "Safe Mode", and press Enter. > > Also, see: > http://tinyurl.com/3px9 > > -- > Glen Ventura, MS MVP Windows, A+ > http://dts-l.net/ > http://dts-l.net/goodpost.htm If the "F8" doesn't work try the "Del" key. This works on some computers. -- Old Bob
Guest Gary S. Terhune Posted May 5, 2008 Posted May 5, 2008 Re: How to go in safe mode? You're thinking of BIOS, Old Bob. Different menu. -- Gary S. Terhune MS-MVP Shell/User http://www.grystmill.com "Old Bob" <Old.Bob.26521fa@news.win98banter.com> wrote in message news:Old.Bob.26521fa@news.win98banter.com... > > glee;220659 Wrote: >> "A Ng" ANg@discussions.microsoft.com wrote in message >> news:A888D6A7-EA86-4AB0-9D33-05443BD072F0@microsoft.com...- >> For Win98, how rto i get to safe mode? i tried F8 (WinXp, Dell), but >> doesn't >> work. MY system is packard bell.- >> >> >> Start the computer and HOLD DOWN the CTRL key till the Windows 98 >> Startup menu >> (boot menu) appears. >> ~OR~ >> Repeatedly tap the F8 key after the memory count to bring up the boot >> menu. >> >> Then use the arrow keys to select "Safe Mode", and press Enter. >> >> Also, see: >> http://tinyurl.com/3px9 >> >> -- >> Glen Ventura, MS MVP Windows, A+ >> http://dts-l.net/ >> http://dts-l.net/goodpost.htm > > If the "F8" doesn't work try the "Del" key. This works on some > computers. > > > > > -- > Old Bob
Recommended Posts