XP Home : Unable to go into Hibernation or Standby Mode

[Guest Mr. Low]

Dear Sir,

 

I have upgraded by PC with SP3 two days ago.

 

Now I am unable to enter into hibernation or standby mode.

 

The error message is: “ The device driver for the ‘Communication Port (COM1)

devices is preventing the machine from hibernation. Please close all

application and try again. If problem persist, you may need to update the

driver.”

 

I have checked and confirmed that all the desktop application inclusive of

the internet connection are off, but this error message keep coming when I

want to go into hibernation.

 

May I know how to overcome this problem?

 

If I am going to update the driver, I do not know where to get it,

appreciate very much if someone knowledgeable could help me on this.

 

Thanks

 

Low

 

 

--

A36B58K641

[Guest MowGreen [MVP]]

Re: XP Home : Unable to go into Hibernation or Standby Mode

 

Mr. Low,

 

The possible cause might be that the Communications Port needs to be

either uninstalled/reinstalled, or the driver needs to be updated.

If the system is on broadband the issue may stem from the ethernet card

[Network adapter]. If it's on dialup, it may be the modem.

 

First thing to try would be to uninstall Communications Port [COM1] via

Device Manager and then click Action, Scan for hardware changes, and

allow DM to reinstall the drivers.

If the result is the same then check see if there is a more recent

driver for Communications Port [COM1].

 

Open Device Manager by going to Start > Run > type in or copy&paste the

below into the Open: line and then click OK or press Enter

 

devmgmt.msc

 

Click the plus sign next to Ports, then click on Communications Port

[COM1].

 

*Right* click on Communications Port [COM1] and then 'Uninstall' to

remove it.

Do the same to update the driver except choose 'Update Driver'.

IF reinstalling/updating the driver for Communications Port [COM1]

doesn't resolve the issue, try the same steps for the Network adapter

and then the modem, depending on how the system connects to the internet.

 

 

MowGreen [MVP 2003-2008]

===============

*-343-* FDNY

Never Forgotten

===============

 

 

 

Mr. Low wrote:

> Dear Sir,

>

> I have upgraded by PC with SP3 two days ago.

>

> Now I am unable to enter into hibernation or standby mode.

>

> The error message is: “ The device driver for the ‘Communication Port (COM1)

> devices is preventing the machine from hibernation. Please close all

> application and try again. If problem persist, you may need to update the

> driver.”

>

> I have checked and confirmed that all the desktop application inclusive of

> the internet connection are off, but this error message keep coming when I

> want to go into hibernation.

>

> May I know how to overcome this problem?

>

> If I am going to update the driver, I do not know where to get it,

> appreciate very much if someone knowledgeable could help me on this.

>

> Thanks

>

> Low

>

>

[Guest Mr. Low]

Re: XP Home : Unable to go into Hibernation or Standby Mode

 

Hello MowGreen,

 

Many thanks for your professional advice, the problem is now fully resolved.

 

Best Regards

 

Low

 

--

A36B58K641

 

 

"MowGreen [MVP]" wrote:

> Mr. Low,

>

> The possible cause might be that the Communications Port needs to be

> either uninstalled/reinstalled, or the driver needs to be updated.

> If the system is on broadband the issue may stem from the ethernet card

> [Network adapter]. If it's on dialup, it may be the modem.

>

> First thing to try would be to uninstall Communications Port [COM1] via

> Device Manager and then click Action, Scan for hardware changes, and

> allow DM to reinstall the drivers.

> If the result is the same then check see if there is a more recent

> driver for Communications Port [COM1].

>

> Open Device Manager by going to Start > Run > type in or copy&paste the

> below into the Open: line and then click OK or press Enter

>

> devmgmt.msc

>

> Click the plus sign next to Ports, then click on Communications Port

> [COM1].

>

> *Right* click on Communications Port [COM1] and then 'Uninstall' to

> remove it.

> Do the same to update the driver except choose 'Update Driver'.

> IF reinstalling/updating the driver for Communications Port [COM1]

> doesn't resolve the issue, try the same steps for the Network adapter

> and then the modem, depending on how the system connects to the internet.

>

>

> MowGreen [MVP 2003-2008]

> ===============

> *-343-* FDNY

> Never Forgotten

> ===============

>

>

>

> Mr. Low wrote:

>

> > Dear Sir,

> >

> > I have upgraded by PC with SP3 two days ago.

> >

> > Now I am unable to enter into hibernation or standby mode.

> >

> > The error message is: “ The device driver for the ‘Communication Port (COM1)

> > devices is preventing the machine from hibernation. Please close all

> > application and try again. If problem persist, you may need to update the

> > driver.”

> >

> > I have checked and confirmed that all the desktop application inclusive of

> > the internet connection are off, but this error message keep coming when I

> > want to go into hibernation.

> >

> > May I know how to overcome this problem?

> >

> > If I am going to update the driver, I do not know where to get it,

> > appreciate very much if someone knowledgeable could help me on this.

> >

> > Thanks

> >

> > Low

> >

> >

>

[Guest MowGreen [MVP]]

Re: XP Home : Unable to go into Hibernation or Standby Mode

 

Mr. Low wrote:

> Hello MowGreen,

>

> Many thanks for your professional advice, the problem is now fully resolved.

>

> Best Regards

>

> Low

>

 

You're mowst welcome. Glad to hear that the issue is resolved.

 

MowGreen [MVP 2003-2008]

===============

*-343-* FDNY

Never Forgotten

===============

[Guest Mr. Low]

Re: XP Home : Unable to go into Hibernation or Standby Mode

 

Hello MowGreen,

 

Although the problem has been fixed earlier, but when I check my disk for

error

the same problem recur, is there any other way to fix it completely.

 

My Event Logs are are follows:

 

====================================================

Event Type: Error

Event Source: serenum

Event Category: None

Event ID: 43

Date: 5/19/2008

Time: 6:21:03 PM

User: N/A

Computer: LOWSK

Description:

The description for Event ID ( 43 ) in Source ( serenum ) cannot be found.

The local computer may not have the necessary registry information or message

DLL files to display messages from a remote computer. You may be able to use

the /AUXSOURCE= flag to retrieve this description; see Help and Support for

details. The following information is part of the event: .

Data:

0000: 16 00 00 00 01 00 c0 00 ......À.

0008: 00 00 00 00 2b 00 04 c0 ....+..À

0010: 05 00 03 00 56 00 00 c0 ....V..À

0018: 00 00 00 00 00 00 00 00 ........

0020: 00 00 00 00 00 00 00 00 ........

 

=====================================================

Event Type: Error

Event Source: Serial

Event Category: None

Event ID: 36

Date: 5/19/2008

Time: 6:21:56 PM

User: N/A

Computer: LOWSK

Description:

While validating that \Device\Serial0 was really a serial port, the contents

of the divisor latch register was identical to the interrupt enable and the

receive registers. The device is assumed not to be a serial port and will be

deleted.

 

For more information, see Help and Support Center at

http://go.microsoft.com/fwlink/events.asp.

Data:

0000: 00 00 08 00 02 00 56 00 ......V.

0008: 00 00 00 00 24 00 06 c0 ....$..À

0010: 3e 00 00 00 00 00 00 00 >.......

0018: 00 00 00 00 00 00 00 00 ........

0020: 00 00 00 00 00 00 00 00 ........

0028: f8 03 00 00 00 00 00 00 ø.......

 

===================================================

 

Thanks

 

Low

 

 

 

--

A36B58K641

 

 

"MowGreen [MVP]" wrote:

> Mr. Low wrote:

>

> > Hello MowGreen,

> >

> > Many thanks for your professional advice, the problem is now fully resolved.

> >

> > Best Regards

> >

> > Low

> >

>

> You're mowst welcome. Glad to hear that the issue is resolved.

>

> MowGreen [MVP 2003-2008]

> ===============

> *-343-* FDNY

> Never Forgotten

> ===============

>