computer change

[Guest Truckerchris]

I have a HP computer with a Pentium II (800 HZ) processor running Win XP

Pro and I was given a Dell with a Pentium IV (2.4 GHz) processor running Win

XP Home. I put the Hard drive from the HP into the Dell to use the faster

processor and the info on the Hard drive. I set the BIOS to boot first from

the HD and disabled the floppy and CD. After the computer goes through the

BIOS I get a cursor in the upper left corner of the monitor, I let it flash

for 4 hours (left it thinking it was looking at the system) but it never

booted. I have tried setting the HD to Master, Single and Cable Select all

with the same results. I cannot get the HD from the HP computer to boot in

the Dell. What am I doing wrong?

[Guest R. McCarty]

Re: computer change

 

The two computers have different system level components ( Chipset ).

XP is configured for a particular Mass Storage controller specific to the

chipset of the motherboard. When you moved the hard drive from one

PC to the other the XP instance does not have the proper driver for the

Mass Storage controller. It can't detect and mount the drive to boot up

XP. To do what you're trying will require a Repair or in-place install.

The other issue you'll run into is OEM branded validation. It's likely that

after a Repair install the XP activation will fail.

 

"Truckerchris" <Truckerchris@discussions.microsoft.com> wrote in message

news:C39E8B15-7343-4F19-B62A-DE85FE49196F@microsoft.com...

>

> I have a HP computer with a Pentium II (800 HZ) processor running Win XP

> Pro and I was given a Dell with a Pentium IV (2.4 GHz) processor running

> Win

> XP Home. I put the Hard drive from the HP into the Dell to use the faster

> processor and the info on the Hard drive. I set the BIOS to boot first

> from

> the HD and disabled the floppy and CD. After the computer goes through the

> BIOS I get a cursor in the upper left corner of the monitor, I let it

> flash

> for 4 hours (left it thinking it was looking at the system) but it never

> booted. I have tried setting the HD to Master, Single and Cable Select all

> with the same results. I cannot get the HD from the HP computer to boot in

> the Dell. What am I doing wrong?

>

>

[Guest Mark]

Re: computer change

 

If want XP Pro in the Dell you will have to buy a copy. The Dell is

rejecting what you did.

 

Mark

 

"Truckerchris" <Truckerchris@discussions.microsoft.com> wrote in message

news:C39E8B15-7343-4F19-B62A-DE85FE49196F@microsoft.com...

>

> I have a HP computer with a Pentium II (800 HZ) processor running Win XP

> Pro and I was given a Dell with a Pentium IV (2.4 GHz) processor running

> Win

> XP Home. I put the Hard drive from the HP into the Dell to use the faster

> processor and the info on the Hard drive. I set the BIOS to boot first

> from

> the HD and disabled the floppy and CD. After the computer goes through the

> BIOS I get a cursor in the upper left corner of the monitor, I let it

> flash

> for 4 hours (left it thinking it was looking at the system) but it never

> booted. I have tried setting the HD to Master, Single and Cable Select all

> with the same results. I cannot get the HD from the HP computer to boot in

> the Dell. What am I doing wrong?

>

>

[Guest David Webb]

Re: computer change

 

You cannot succeed with the transfer you're attempting. OEM products are tied to

original systems by design and by license. Also, the two systems involved have

completely different hardware, that's why the HP drive is sitting there blinking

at you. It's in a foreign land.

 

If your HP system had a RETAIL version of WinXP, there's a chance that you could

successfully transfer the drive to the Dell system by using what's called a

repair installation. This would also require that you obtain any special drivers

from Dell beforehand.

 

The applicable procedures are detailed in the section titled, "Replace a failed

motherboard" in this MS tech article:

 

How to replace the motherboard on a computer that is running Windows Server

2003, Windows XP, or Windows 2000

http://support.microsoft.com/default.aspx?scid=kb;en-us;824125

 

 

"Truckerchris" <Truckerchris@discussions.microsoft.com> wrote in message

news:C39E8B15-7343-4F19-B62A-DE85FE49196F@microsoft.com...

>

> I have a HP computer with a Pentium II (800 HZ) processor running Win XP

> Pro and I was given a Dell with a Pentium IV (2.4 GHz) processor running Win

> XP Home. I put the Hard drive from the HP into the Dell to use the faster

> processor and the info on the Hard drive. I set the BIOS to boot first from

> the HD and disabled the floppy and CD. After the computer goes through the

> BIOS I get a cursor in the upper left corner of the monitor, I let it flash

> for 4 hours (left it thinking it was looking at the system) but it never

> booted. I have tried setting the HD to Master, Single and Cable Select all

> with the same results. I cannot get the HD from the HP computer to boot in

> the Dell. What am I doing wrong?

>

>

[Guest Bruce Chambers]

Re: computer change

 

Truckerchris wrote:

> I have a HP computer with a Pentium II (800 HZ) processor running Win XP

> Pro and I was given a Dell with a Pentium IV (2.4 GHz) processor running Win

> XP Home. I put the Hard drive from the HP into the Dell to use the faster

> processor and the info on the Hard drive. I set the BIOS to boot first from

> the HD and disabled the floppy and CD. After the computer goes through the

> BIOS I get a cursor in the upper left corner of the monitor, I let it flash

> for 4 hours (left it thinking it was looking at the system) but it never

> booted. I have tried setting the HD to Master, Single and Cable Select all

> with the same results. I cannot get the HD from the HP computer to boot in

> the Dell. What am I doing wrong?

>

>

 

 

Normally, and assuming a retail license (many factory-installed OEM

installations are BIOS-locked to a specific motherboard chipset and

therefore are *not* transferable to a new motherboard - check yours

before starting), unless the new motherboard is virtually identical

(same chipset, same IDE controllers, same BIOS version, etc.) to the one

on which the WinXP installation was originally performed, you'll need to

perform a repair (a.k.a. in-place upgrade) installation, at the very least:

 

How to Perform an In-Place Upgrade of Windows XP

http://support.microsoft.com/directory/article.asp?ID=KB;EN-US;Q315341

 

Changing a Motherboard or Moving a Hard Drive with WinXP Installed

http://www.michaelstevenstech.com/moving_xp.html

 

The "why" is quite simple, really, and has nothing to do with

licensing issues, per se; it's a purely technical matter, at this point.

You've pulled the proverbial hardware rug out from under the OS. (If

you don't like -- or get -- the rug analogy, think of it as picking up a

Cape Cod style home and then setting it down onto a Ranch style

foundation. It just isn't going to fit.) WinXP, like Win2K before it,

is not nearly as "promiscuous" as Win9x when it comes to accepting any

old hardware configuration you throw at it. On installation it

"tailors" itself to the specific hardware found. This is one of the

reasons that the entire WinNT/2K/XP OS family is so much more stable

than the Win9x group.

 

As always when undertaking such a significant change, back up any

important data before starting.

 

This will also probably require re-activation, unless you have a

Volume Licensed version of WinXP Pro installed. If it's been more than

120 days since you last activated that specific Product Key, you'll most

likely be able to activate via the Internet without problem. If it's

been less, you might have to make a 5 minute phone call.

 

 

--

 

Bruce Chambers

 

Help us help you:

http://www.catb.org/~esr/faqs/smart-questions.html

 

http://support.microsoft.com/default.aspx/kb/555375

 

They that can give up essential liberty to obtain a little temporary

safety deserve neither liberty nor safety. ~Benjamin Franklin

 

Many people would rather die than think; in fact, most do. ~Bertrand Russell

 

The philosopher has never killed any priests, whereas the priest has

killed a great many philosophers.

~ Denis Diderot