Before adding desktops to....

May 30, 2008

Before I start adding computers to AD do I still need to turn on Network

Discovery?

May 30, 2008

Re: Before adding desktops to....

Hello Eric,

I assume it's a Vista machine? Then check this all:

-Network Discovery has to be enabled

-You must have a Domain DNS server as primary on the NIC settings, NO internet

DNS servers

-Use the FQDN of the domain to join, like mycompany.com

-The time difference between vista & domain must be < 5 mn

-File Sharing has to be enabled

Best regards

Meinolf Weber

Disclaimer: This posting is provided "AS IS" with no warranties, and confers

no rights.

** Please do NOT email, only reply to Newsgroups

** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

> Before I start adding computers to AD do I still need to turn on

> Network Discovery?

>

May 30, 2008

Re: Before adding desktops to....

It's a Win2008 DataCenter (AD DS, and I do have it connected to the

internet, during install it did ask me if I wanted/should create it a a

Delagate, but I didn't, This is my primary Master, the way I can remove it

from the internet is to change the Gateway IP or do I have to reinstall AD

DS?)..., and I will be adding a XP Pro desktop (software Development) and a

Win2000 Labtop.

"Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message

news:ff16fb669e19e8ca9040b2e22441@msnews.microsoft.com...

> Hello Eric,

>

> I assume it's a Vista machine? Then check this all:

> -Network Discovery has to be enabled

> -You must have a Domain DNS server as primary on the NIC settings, NO

> internet DNS servers

> -Use the FQDN of the domain to join, like mycompany.com

> -The time difference between vista & domain must be < 5 mn

> -File Sharing has to be enabled

>

> Best regards

>

> Meinolf Weber

> Disclaimer: This posting is provided "AS IS" with no warranties, and

> confers no rights.

> ** Please do NOT email, only reply to Newsgroups

> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

>

>> Before I start adding computers to AD do I still need to turn on

>> Network Discovery?

>>

>

May 30, 2008

Re: Before adding desktops to....

Hello Eric,

On the DC you can use the default settings to connect the clients to the

domain. For the ip configuration please post an unedited ipconfig /all. You

have to use an ip from a private ip range not from the public internal in

the domain. Also clients have to use only domain internal ip's and also DNS

server. On the DC/DNS server you have to setup forwarders to the ISP's DNS

server, so all clients in the domain have internet access if needed.

Best regards

Meinolf Weber

Disclaimer: This posting is provided "AS IS" with no warranties, and confers

no rights.

** Please do NOT email, only reply to Newsgroups

** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

> It's a Win2008 DataCenter (AD DS, and I do have it connected to the

> internet, during install it did ask me if I wanted/should create it a

> a Delagate, but I didn't, This is my primary Master, the way I can

> remove it from the internet is to change the Gateway IP or do I have

> to reinstall AD DS?)..., and I will be adding a XP Pro desktop

> (software Development) and a Win2000 Labtop.

>

> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message

> news:ff16fb669e19e8ca9040b2e22441@msnews.microsoft.com...

>

>> Hello Eric,

>>

>> I assume it's a Vista machine? Then check this all:

>> -Network Discovery has to be enabled

>> -You must have a Domain DNS server as primary on the NIC settings, NO

>> internet DNS servers

>> -Use the FQDN of the domain to join, like mycompany.com

>> -The time difference between vista & domain must be < 5 mn

>> -File Sharing has to be enabled

>> Best regards

>>

>> Meinolf Weber

>> Disclaimer: This posting is provided "AS IS" with no warranties, and

>> confers no rights.

>> ** Please do NOT email, only reply to Newsgroups

>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

>>> Before I start adding computers to AD do I still need to turn on

>>> Network Discovery?

>>>

May 31, 2008

Re: Before adding desktops to....

Is there a Webcast and/or Virtual Lab you can link me to that would show how

to setup a small AD DS, Adding Desktop, etc... server?

"Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message

news:ff16fb669e3388ca909d6e07aaf1@msnews.microsoft.com...

> Hello Eric,

>

> On the DC you can use the default settings to connect the clients to the

> domain. For the ip configuration please post an unedited ipconfig /all.

> You have to use an ip from a private ip range not from the public internal

> in the domain. Also clients have to use only domain internal ip's and also

> DNS server. On the DC/DNS server you have to setup forwarders to the ISP's

> DNS server, so all clients in the domain have internet access if needed.

>

> Best regards

>

> Meinolf Weber

> Disclaimer: This posting is provided "AS IS" with no warranties, and

> confers no rights.

> ** Please do NOT email, only reply to Newsgroups

> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

>

>> It's a Win2008 DataCenter (AD DS, and I do have it connected to the

>> internet, during install it did ask me if I wanted/should create it a

>> a Delagate, but I didn't, This is my primary Master, the way I can

>> remove it from the internet is to change the Gateway IP or do I have

>> to reinstall AD DS?)..., and I will be adding a XP Pro desktop

>> (software Development) and a Win2000 Labtop.

>>

>> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message

>> news:ff16fb669e19e8ca9040b2e22441@msnews.microsoft.com...

>>

>>> Hello Eric,

>>>

>>> I assume it's a Vista machine? Then check this all:

>>> -Network Discovery has to be enabled

>>> -You must have a Domain DNS server as primary on the NIC settings, NO

>>> internet DNS servers

>>> -Use the FQDN of the domain to join, like mycompany.com

>>> -The time difference between vista & domain must be < 5 mn

>>> -File Sharing has to be enabled

>>> Best regards

>>>

>>> Meinolf Weber

>>> Disclaimer: This posting is provided "AS IS" with no warranties, and

>>> confers no rights.

>>> ** Please do NOT email, only reply to Newsgroups

>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

>>>> Before I start adding computers to AD do I still need to turn on

>>>> Network Discovery?

>>>>

>

May 31, 2008

Re: Before adding desktops to....

Hello Eric,

Maybe here:

http://www.microsoft.com/events/series/msdnwindowsserver2008.aspx

Also look here:

https://www.microsoft.com/downloads/details.aspx?FamilyID=518d870c-fa3e-4f6a-97f5-acaf31de6dce&displaylang=en

Best regards

Meinolf Weber

Disclaimer: This posting is provided "AS IS" with no warranties, and confers

no rights.

** Please do NOT email, only reply to Newsgroups

** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

> Is there a Webcast and/or Virtual Lab you can link me to that would

> show how to setup a small AD DS, Adding Desktop, etc... server?

>

> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message

> news:ff16fb669e3388ca909d6e07aaf1@msnews.microsoft.com...

>

>> Hello Eric,

>>

>> On the DC you can use the default settings to connect the clients to

>> the domain. For the ip configuration please post an unedited ipconfig

>> /all. You have to use an ip from a private ip range not from the

>> public internal in the domain. Also clients have to use only domain

>> internal ip's and also DNS server. On the DC/DNS server you have to

>> setup forwarders to the ISP's DNS server, so all clients in the

>> domain have internet access if needed.

>>

>> Best regards

>>

>> Meinolf Weber

>> Disclaimer: This posting is provided "AS IS" with no warranties, and

>> confers no rights.

>> ** Please do NOT email, only reply to Newsgroups

>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

>>> It's a Win2008 DataCenter (AD DS, and I do have it connected to the

>>> internet, during install it did ask me if I wanted/should create it

>>> a a Delagate, but I didn't, This is my primary Master, the way I

>>> can remove it from the internet is to change the Gateway IP or do I

>>> have to reinstall AD DS?)..., and I will be adding a XP Pro desktop

>>> (software Development) and a Win2000 Labtop.

>>>

>>> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message

>>> news:ff16fb669e19e8ca9040b2e22441@msnews.microsoft.com...

>>>

>>>> Hello Eric,

>>>>

>>>> I assume it's a Vista machine? Then check this all:

>>>> -Network Discovery has to be enabled

>>>> -You must have a Domain DNS server as primary on the NIC settings,

>>>> NO

>>>> internet DNS servers

>>>> -Use the FQDN of the domain to join, like mycompany.com

>>>> -The time difference between vista & domain must be < 5 mn

>>>> -File Sharing has to be enabled

>>>> Best regards

>>>> Meinolf Weber

>>>> Disclaimer: This posting is provided "AS IS" with no warranties,

>>>> and

>>>> confers no rights.

>>>> ** Please do NOT email, only reply to Newsgroups

>>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

>>>>> Before I start adding computers to AD do I still need to turn on

>>>>> Network Discovery?

>>>>>

June 1, 2008

Re: Before adding desktops to....

Thanks Weber!...

while I got you here, I tried to add my WinXP Pro to my domain and I get the

access is denied.

Win2008 Data Center NIC is configured:

IPv4

IP 192.168.0.102

subnet 255..............

D Gateway 192.168.0.1 (My Dynex Router to a Clear Wire Hub

for the internet)

Perf DNS Server 127.0.0.1

WinXP Pro NIC is configured:

IP 192.168.0.101

subnet 255..............

D Gatway 19.168.0.1

Perf DNS Sever 192.168.0.1

I know this is wrong, but could you reconfigure this to how is should look?

I would appreciate it..

"Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message

news:ff16fb669e5998ca9159a63e8342@msnews.microsoft.com...

> Hello Eric,

>

> Maybe here:

> http://www.microsoft.com/events/series/msdnwindowsserver2008.aspx

>

> Also look here:

> https://www.microsoft.com/downloads/details.aspx?FamilyID=518d870c-fa3e-4f6a-97f5-acaf31de6dce&displaylang=en

>

> Best regards

>

> Meinolf Weber

> Disclaimer: This posting is provided "AS IS" with no warranties, and

> confers no rights.

> ** Please do NOT email, only reply to Newsgroups

> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

>

>> Is there a Webcast and/or Virtual Lab you can link me to that would

>> show how to setup a small AD DS, Adding Desktop, etc... server?

>>

>> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message

>> news:ff16fb669e3388ca909d6e07aaf1@msnews.microsoft.com...

>>

>>> Hello Eric,

>>>

>>> On the DC you can use the default settings to connect the clients to

>>> the domain. For the ip configuration please post an unedited ipconfig

>>> /all. You have to use an ip from a private ip range not from the

>>> public internal in the domain. Also clients have to use only domain

>>> internal ip's and also DNS server. On the DC/DNS server you have to

>>> setup forwarders to the ISP's DNS server, so all clients in the

>>> domain have internet access if needed.

>>>

>>> Best regards

>>>

>>> Meinolf Weber

>>> Disclaimer: This posting is provided "AS IS" with no warranties, and

>>> confers no rights.

>>> ** Please do NOT email, only reply to Newsgroups

>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

>>>> It's a Win2008 DataCenter (AD DS, and I do have it connected to the

>>>> internet, during install it did ask me if I wanted/should create it

>>>> a a Delagate, but I didn't, This is my primary Master, the way I

>>>> can remove it from the internet is to change the Gateway IP or do I

>>>> have to reinstall AD DS?)..., and I will be adding a XP Pro desktop

>>>> (software Development) and a Win2000 Labtop.

>>>>

>>>> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message

>>>> news:ff16fb669e19e8ca9040b2e22441@msnews.microsoft.com...

>>>>

>>>>> Hello Eric,

>>>>>

>>>>> I assume it's a Vista machine? Then check this all:

>>>>> -Network Discovery has to be enabled

>>>>> -You must have a Domain DNS server as primary on the NIC settings,

>>>>> NO

>>>>> internet DNS servers

>>>>> -Use the FQDN of the domain to join, like mycompany.com

>>>>> -The time difference between vista & domain must be < 5 mn

>>>>> -File Sharing has to be enabled

>>>>> Best regards

>>>>> Meinolf Weber

>>>>> Disclaimer: This posting is provided "AS IS" with no warranties,

>>>>> and

>>>>> confers no rights.

>>>>> ** Please do NOT email, only reply to Newsgroups

>>>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

>>>>>> Before I start adding computers to AD do I still need to turn on

>>>>>> Network Discovery?

>>>>>>

>

June 1, 2008

Re: Before adding desktops to....

Hello Eric,

Server:

ip 192.168.0.102

sm 255.......

dg 192.168.0.1

dns 192.168.0.102

Client:

ip 192.168.0.101

sm 255.......

dg 192.168.0.1

dns 192.168.0.102

Best regards

Meinolf Weber

Disclaimer: This posting is provided "AS IS" with no warranties, and confers

no rights.

** Please do NOT email, only reply to Newsgroups

** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

> Thanks Weber!...

>

> while I got you here, I tried to add my WinXP Pro to my domain and I

> get the access is denied.

>

> Win2008 Data Center NIC is configured:

> IPv4

> IP 192.168.0.102

> subnet 255..............

> D Gateway 192.168.0.1 (My Dynex Router to a Clear Wire

> Hub

> for the internet)

> Perf DNS Server 127.0.0.1

> WinXP Pro NIC is configured:

> IP 192.168.0.101

> subnet 255..............

> D Gatway 19.168.0.1

> Perf DNS Sever 192.168.0.1

> I know this is wrong, but could you reconfigure this to how is should

> look? I would appreciate it..

>

> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message

> news:ff16fb669e5998ca9159a63e8342@msnews.microsoft.com...

>

>> Hello Eric,

>>

>> Maybe here:

>> http://www.microsoft.com/events/series/msdnwindowsserver2008.aspx

>> Also look here:

>> https://www.microsoft.com/downloads/details.aspx?FamilyID=518d870c-fa

>> 3e-4f6a-97f5-acaf31de6dce&displaylang=en

>> Best regards

>>

>> Meinolf Weber

>> Disclaimer: This posting is provided "AS IS" with no warranties, and

>> confers no rights.

>> ** Please do NOT email, only reply to Newsgroups

>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

>>> Is there a Webcast and/or Virtual Lab you can link me to that would

>>> show how to setup a small AD DS, Adding Desktop, etc... server?

>>>

>>> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message

>>> news:ff16fb669e3388ca909d6e07aaf1@msnews.microsoft.com...

>>>

>>>> Hello Eric,

>>>>

>>>> On the DC you can use the default settings to connect the clients

>>>> to the domain. For the ip configuration please post an unedited

>>>> ipconfig /all. You have to use an ip from a private ip range not

>>>> from the public internal in the domain. Also clients have to use

>>>> only domain internal ip's and also DNS server. On the DC/DNS server

>>>> you have to setup forwarders to the ISP's DNS server, so all

>>>> clients in the domain have internet access if needed.

>>>>

>>>> Best regards

>>>>

>>>> Meinolf Weber

>>>> Disclaimer: This posting is provided "AS IS" with no warranties,

>>>> and

>>>> confers no rights.

>>>> ** Please do NOT email, only reply to Newsgroups

>>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

>>>>> It's a Win2008 DataCenter (AD DS, and I do have it connected to

>>>>> the internet, during install it did ask me if I wanted/should

>>>>> create it a a Delagate, but I didn't, This is my primary Master,

>>>>> the way I can remove it from the internet is to change the Gateway

>>>>> IP or do I have to reinstall AD DS?)..., and I will be adding a XP

>>>>> Pro desktop (software Development) and a Win2000 Labtop.

>>>>>

>>>>> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message

>>>>> news:ff16fb669e19e8ca9040b2e22441@msnews.microsoft.com...

>>>>>

>>>>>> Hello Eric,

>>>>>>

>>>>>> I assume it's a Vista machine? Then check this all:

>>>>>> -Network Discovery has to be enabled

>>>>>> -You must have a Domain DNS server as primary on the NIC

>>>>>> settings,

>>>>>> NO

>>>>>> internet DNS servers

>>>>>> -Use the FQDN of the domain to join, like mycompany.com

>>>>>> -The time difference between vista & domain must be < 5 mn

>>>>>> -File Sharing has to be enabled

>>>>>> Best regards

>>>>>> Meinolf Weber

>>>>>> Disclaimer: This posting is provided "AS IS" with no warranties,

>>>>>> and

>>>>>> confers no rights.

>>>>>> ** Please do NOT email, only reply to Newsgroups

>>>>>> ** HELP us help YOU!!!

>>>>>> http://www.blakjak.demon.co.uk/mul_crss.htm

>>>>>>> Before I start adding computers to AD do I still need to turn on

>>>>>>> Network Discovery?

>>>>>>>

June 1, 2008

Re: Before adding desktops to....

Awh! Thanks Weber,

I also was using the wrong user to add the XP, I was using a non-admin.

"Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message

news:ff16fb669e89c8ca9250a0b918a0@msnews.microsoft.com...

> Hello Eric,

>

> Server:

>

> ip 192.168.0.102

> sm 255.......

> dg 192.168.0.1

> dns 192.168.0.102

>

> Client:

>

> ip 192.168.0.101

> sm 255.......

> dg 192.168.0.1

> dns 192.168.0.102

>

> Best regards

>

> Meinolf Weber

> Disclaimer: This posting is provided "AS IS" with no warranties, and

> confers no rights.

> ** Please do NOT email, only reply to Newsgroups

> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

>

>> Thanks Weber!...

>>

>> while I got you here, I tried to add my WinXP Pro to my domain and I

>> get the access is denied.

>>

>> Win2008 Data Center NIC is configured:

>> IPv4

>> IP 192.168.0.102

>> subnet 255..............

>> D Gateway 192.168.0.1 (My Dynex Router to a Clear Wire

>> Hub

>> for the internet)

>> Perf DNS Server 127.0.0.1

>> WinXP Pro NIC is configured:

>> IP 192.168.0.101

>> subnet 255..............

>> D Gatway 19.168.0.1

>> Perf DNS Sever 192.168.0.1

>> I know this is wrong, but could you reconfigure this to how is should

>> look? I would appreciate it..

>>

>> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message

>> news:ff16fb669e5998ca9159a63e8342@msnews.microsoft.com...

>>

>>> Hello Eric,

>>>

>>> Maybe here:

>>> http://www.microsoft.com/events/series/msdnwindowsserver2008.aspx

>>> Also look here:

>>> https://www.microsoft.com/downloads/details.aspx?FamilyID=518d870c-fa

>>> 3e-4f6a-97f5-acaf31de6dce&displaylang=en

>>> Best regards

>>>

>>> Meinolf Weber

>>> Disclaimer: This posting is provided "AS IS" with no warranties, and

>>> confers no rights.

>>> ** Please do NOT email, only reply to Newsgroups

>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

>>>> Is there a Webcast and/or Virtual Lab you can link me to that would

>>>> show how to setup a small AD DS, Adding Desktop, etc... server?

>>>>

>>>> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message

>>>> news:ff16fb669e3388ca909d6e07aaf1@msnews.microsoft.com...

>>>>

>>>>> Hello Eric,

>>>>>

>>>>> On the DC you can use the default settings to connect the clients

>>>>> to the domain. For the ip configuration please post an unedited

>>>>> ipconfig /all. You have to use an ip from a private ip range not

>>>>> from the public internal in the domain. Also clients have to use

>>>>> only domain internal ip's and also DNS server. On the DC/DNS server

>>>>> you have to setup forwarders to the ISP's DNS server, so all

>>>>> clients in the domain have internet access if needed.

>>>>>

>>>>> Best regards

>>>>>

>>>>> Meinolf Weber

>>>>> Disclaimer: This posting is provided "AS IS" with no warranties,

>>>>> and

>>>>> confers no rights.

>>>>> ** Please do NOT email, only reply to Newsgroups

>>>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

>>>>>> It's a Win2008 DataCenter (AD DS, and I do have it connected to

>>>>>> the internet, during install it did ask me if I wanted/should

>>>>>> create it a a Delagate, but I didn't, This is my primary Master,

>>>>>> the way I can remove it from the internet is to change the Gateway

>>>>>> IP or do I have to reinstall AD DS?)..., and I will be adding a XP

>>>>>> Pro desktop (software Development) and a Win2000 Labtop.

>>>>>>

>>>>>> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message

>>>>>> news:ff16fb669e19e8ca9040b2e22441@msnews.microsoft.com...

>>>>>>

>>>>>>> Hello Eric,

>>>>>>>

>>>>>>> I assume it's a Vista machine? Then check this all:

>>>>>>> -Network Discovery has to be enabled

>>>>>>> -You must have a Domain DNS server as primary on the NIC

>>>>>>> settings,

>>>>>>> NO

>>>>>>> internet DNS servers

>>>>>>> -Use the FQDN of the domain to join, like mycompany.com

>>>>>>> -The time difference between vista & domain must be < 5 mn

>>>>>>> -File Sharing has to be enabled

>>>>>>> Best regards

>>>>>>> Meinolf Weber

>>>>>>> Disclaimer: This posting is provided "AS IS" with no warranties,

>>>>>>> and

>>>>>>> confers no rights.

>>>>>>> ** Please do NOT email, only reply to Newsgroups

>>>>>>> ** HELP us help YOU!!!

>>>>>>> http://www.blakjak.demon.co.uk/mul_crss.htm

>>>>>>>> Before I start adding computers to AD do I still need to turn on

>>>>>>>> Network Discovery?

>>>>>>>>

>

June 2, 2008

Re: Before adding desktops to....

Hello Eric,

So it works now?

Best regards

Meinolf Weber

Disclaimer: This posting is provided "AS IS" with no warranties, and confers

no rights.

** Please do NOT email, only reply to Newsgroups

** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

> Awh! Thanks Weber,

>

> I also was using the wrong user to add the XP, I was using a

> non-admin.

>

> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message

> news:ff16fb669e89c8ca9250a0b918a0@msnews.microsoft.com...

>

>> Hello Eric,

>>

>> Server:

>>

>> ip 192.168.0.102

>> sm 255.......

>> dg 192.168.0.1

>> dns 192.168.0.102

>> Client:

>>

>> ip 192.168.0.101

>> sm 255.......

>> dg 192.168.0.1

>> dns 192.168.0.102

>> Best regards

>>

>> Meinolf Weber

>> Disclaimer: This posting is provided "AS IS" with no warranties, and

>> confers no rights.

>> ** Please do NOT email, only reply to Newsgroups

>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

>>> Thanks Weber!...

>>>

>>> while I got you here, I tried to add my WinXP Pro to my domain and I

>>> get the access is denied.

>>>

>>> Win2008 Data Center NIC is configured:

>>> IPv4

>>> IP 192.168.0.102

>>> subnet 255..............

>>> D Gateway 192.168.0.1 (My Dynex Router to a Clear Wire

>>> Hub

>>> for the internet)

>>> Perf DNS Server 127.0.0.1

>>> WinXP Pro NIC is configured:

>>> IP 192.168.0.101

>>> subnet 255..............

>>> D Gatway 19.168.0.1

>>> Perf DNS Sever 192.168.0.1

>>> I know this is wrong, but could you reconfigure this to how is

>>> should

>>> look? I would appreciate it..

>>> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message

>>> news:ff16fb669e5998ca9159a63e8342@msnews.microsoft.com...

>>>

>>>> Hello Eric,

>>>>

>>>> Maybe here:

>>>> http://www.microsoft.com/events/series/msdnwindowsserver2008.aspx

>>>> Also look here:

>>>> https://www.microsoft.com/downloads/details.aspx?FamilyID=518d870c-

>>>> fa

>>>> 3e-4f6a-97f5-acaf31de6dce&displaylang=en

>>>> Best regards

>>>> Meinolf Weber

>>>> Disclaimer: This posting is provided "AS IS" with no warranties,

>>>> and

>>>> confers no rights.

>>>> ** Please do NOT email, only reply to Newsgroups

>>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

>>>>> Is there a Webcast and/or Virtual Lab you can link me to that

>>>>> would show how to setup a small AD DS, Adding Desktop, etc...

>>>>> server?

>>>>>

>>>>> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message

>>>>> news:ff16fb669e3388ca909d6e07aaf1@msnews.microsoft.com...

>>>>>

>>>>>> Hello Eric,

>>>>>>

>>>>>> On the DC you can use the default settings to connect the clients

>>>>>> to the domain. For the ip configuration please post an unedited

>>>>>> ipconfig /all. You have to use an ip from a private ip range not

>>>>>> from the public internal in the domain. Also clients have to use

>>>>>> only domain internal ip's and also DNS server. On the DC/DNS

>>>>>> server you have to setup forwarders to the ISP's DNS server, so

>>>>>> all clients in the domain have internet access if needed.

>>>>>>

>>>>>> Best regards

>>>>>>

>>>>>> Meinolf Weber

>>>>>> Disclaimer: This posting is provided "AS IS" with no warranties,

>>>>>> and

>>>>>> confers no rights.

>>>>>> ** Please do NOT email, only reply to Newsgroups

>>>>>> ** HELP us help YOU!!!

>>>>>> http://www.blakjak.demon.co.uk/mul_crss.htm

>>>>>>> It's a Win2008 DataCenter (AD DS, and I do have it connected to

>>>>>>> the internet, during install it did ask me if I wanted/should

>>>>>>> create it a a Delagate, but I didn't, This is my primary

>>>>>>> Master, the way I can remove it from the internet is to change

>>>>>>> the Gateway IP or do I have to reinstall AD DS?)..., and I will

>>>>>>> be adding a XP Pro desktop (software Development) and a Win2000

>>>>>>> Labtop.

>>>>>>>

>>>>>>> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message

>>>>>>> news:ff16fb669e19e8ca9040b2e22441@msnews.microsoft.com...

>>>>>>>

>>>>>>>> Hello Eric,

>>>>>>>>

>>>>>>>> I assume it's a Vista machine? Then check this all:

>>>>>>>> -Network Discovery has to be enabled

>>>>>>>> -You must have a Domain DNS server as primary on the NIC

>>>>>>>> settings,

>>>>>>>> NO

>>>>>>>> internet DNS servers

>>>>>>>> -Use the FQDN of the domain to join, like mycompany.com

>>>>>>>> -The time difference between vista & domain must be < 5 mn

>>>>>>>> -File Sharing has to be enabled

>>>>>>>> Best regards

>>>>>>>> Meinolf Weber

>>>>>>>> Disclaimer: This posting is provided "AS IS" with no

>>>>>>>> warranties,

>>>>>>>> and

>>>>>>>> confers no rights.

>>>>>>>> ** Please do NOT email, only reply to Newsgroups

>>>>>>>> ** HELP us help YOU!!!

>>>>>>>> http://www.blakjak.demon.co.uk/mul_crss.htm

>>>>>>>>> Before I start adding computers to AD do I still need to turn

>>>>>>>>> on Network Discovery?

>>>>>>>>>

Sign In

Before adding desktops to....

Recommended Posts

Guest Eric Miller

Popular Days

Popular Days

Guest Meinolf Weber

Guest Eric Miller

Guest Meinolf Weber

Guest Eric Miller

Guest Meinolf Weber

Guest Eric Miller

Guest Meinolf Weber

Guest Eric Miller

Guest Meinolf Weber

Similar Content

Launching program automatically before log in

anyone experienced this issue before?

Unable to change Desktop Image

Keep selective desktop icons for users

there is no "new desktop" button in task view.

Browse

Activity

Site Info