USB is running at 1.1 when its supposed to be usb 2.0

[Guest dizzyd]

When i put in my flash drive I was prompted that my usb was not running at

full speed? I believe its the above problem? I have an asus M2NE mobo. The

asus update utility is in accessable. Im gonna look on their website. Is

their a patch for xp missing? Any help most welcome.

[Guest philo]

Re: USB is running at 1.1 when its supposed to be usb 2.0

 

 

"dizzyd" <dizzyd@discussions.microsoft.com> wrote in message

news:C04EA350-12CC-45B1-A4A1-3353E79F22B0@microsoft.com...

> When i put in my flash drive I was prompted that my usb was not running at

> full speed? I believe its the above problem? I have an asus M2NE mobo. The

> asus update utility is in accessable. Im gonna look on their website. Is

> their a patch for xp missing? Any help most welcome.

 

 

It might just be the cable you are using.

The USB1 cables are thinner than USB2 cables

[Guest dizzyd]

RE: USB is running at 1.1 when its supposed to be usb 2.0

 

 

 

"dizzyd" wrote:

> When i put in my flash drive I was prompted that my usb was not running at

> full speed? I believe its the above problem? I have an asus M2NE mobo. The

> asus update utility is in accessable. Im gonna look on their website. Is

> their a patch for xp missing? Any help most welcome.

 

This is what

The USB section in control panel says

'The USB mass storage device will function at reduced speed. You must add a

high speed usb host controller to this computer to obtain maximum

performance'?

[Guest R. McCarty]

Re: USB is running at 1.1 when its supposed to be usb 2.0

 

Cables are cables, USB has 4 conductors. There is no such thing as

a USB-1 or USB-2 cable. It's all marketing, The type of Serial data

USB uses doesn't care about the Gauge of wire used in the conductors.

 

"philo" <philo@privacy.net> wrote in message

news:%23nj5AU3wIHA.420@TK2MSFTNGP02.phx.gbl...

>

> "dizzyd" <dizzyd@discussions.microsoft.com> wrote in message

> news:C04EA350-12CC-45B1-A4A1-3353E79F22B0@microsoft.com...

>> When i put in my flash drive I was prompted that my usb was not running

>> at

>> full speed? I believe its the above problem? I have an asus M2NE mobo.

>> The

>> asus update utility is in accessable. Im gonna look on their website. Is

>> their a patch for xp missing? Any help most welcome.

>

>

> It might just be the cable you are using.

> The USB1 cables are thinner than USB2 cables

>

>

[Guest Meinolf Weber]

RE: USB is running at 1.1 when its supposed to be usb 2.0

 

Hello dizzyd,

 

Check here for USB drivers for XP:

http://support.asus.com/download/download.aspx?SLanguage=en-us&model=M2N-E

 

Best regards

 

Meinolf Weber

Disclaimer: This posting is provided "AS IS" with no warranties, and confers

no rights.

** Please do NOT email, only reply to Newsgroups

** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

> asus M2NE

>

[Guest Patrick Keenan]

Re: USB is running at 1.1 when its supposed to be usb 2.0

 

"dizzyd" <dizzyd@discussions.microsoft.com> wrote in message

news:C04EA350-12CC-45B1-A4A1-3353E79F22B0@microsoft.com...

> When i put in my flash drive I was prompted that my usb was not running at

> full speed? I believe its the above problem? I have an asus M2NE mobo. The

> asus update utility is in accessable. Im gonna look on their website. Is

> their a patch for xp missing? Any help most welcome.

 

Do other USB2 devices run at full speed?

 

If not, you may have not installed the motherboard drivers. Your board

would have come with a CD that has the drivers necessary to enable USB2

speeds.

 

HTH

-pk

[Guest dizzyd]

Re: USB is running at 1.1 when its supposed to be usb 2.0

 

Both the mobo usb drivers and asus usb download say if i have service pack 1

or more for xp then usb 2.0 should be installed automatically? Whats going

on? Does anyone else own an asus M2NE mobo and get a similar occurance when

connecting flash drives or other devices?

 

 

 

 

 

 

"Patrick Keenan" wrote:

> "dizzyd" <dizzyd@discussions.microsoft.com> wrote in message

> news:C04EA350-12CC-45B1-A4A1-3353E79F22B0@microsoft.com...

> > When i put in my flash drive I was prompted that my usb was not running at

> > full speed? I believe its the above problem? I have an asus M2NE mobo. The

> > asus update utility is in accessable. Im gonna look on their website. Is

> > their a patch for xp missing? Any help most welcome.

>

> Do other USB2 devices run at full speed?

>

> If not, you may have not installed the motherboard drivers. Your board

> would have come with a CD that has the drivers necessary to enable USB2

> speeds.

>

> HTH

> -pk

>

>

[Guest philo]

Re: USB is running at 1.1 when its supposed to be usb 2.0

 

 

"R. McCarty" <PcEngWork-NoSpam_@mindspring.com> wrote in message

news:e%23Rp9d3wIHA.552@TK2MSFTNGP06.phx.gbl...

> Cables are cables, USB has 4 conductors. There is no such thing as

> a USB-1 or USB-2 cable. It's all marketing, The type of Serial data

> USB uses doesn't care about the Gauge of wire used in the conductors.

>

 

**NO**

 

I recently came across this when friend of mine was trying to access his

external drive...

he was using an old USB cable that was appox 1/4" in diameter. He could only

access the drive at USB1 speed.

 

When we switched over to a cable that was approx 3/8" in diamater the drive

was accessed at USB 2 speeds!

 

It could be the cable!

 

 

 

> "philo" <philo@privacy.net> wrote in message

> news:%23nj5AU3wIHA.420@TK2MSFTNGP02.phx.gbl...

> >

> > "dizzyd" <dizzyd@discussions.microsoft.com> wrote in message

> > news:C04EA350-12CC-45B1-A4A1-3353E79F22B0@microsoft.com...

> >> When i put in my flash drive I was prompted that my usb was not running

> >> at

> >> full speed? I believe its the above problem? I have an asus M2NE mobo.

> >> The

> >> asus update utility is in accessable. Im gonna look on their website.

Is

> >> their a patch for xp missing? Any help most welcome.

> >

> >

> > It might just be the cable you are using.

> > The USB1 cables are thinner than USB2 cables

> >

> >

>

>

[Guest dizzyd]

Re: USB is running at 1.1 when its supposed to be usb 2.0

 

 

 

"dizzyd" wrote:

> Both the mobo usb drivers and asus usb download say if i have service pack 1

> or more for xp then usb 2.0 should be installed automatically? Whats going

> on? Does anyone else own an asus M2NE mobo and get a similar occurance when

> connecting flash drives or other devices? I'd love to get to the bottom of this

>

>

>

>

>

>

> "Patrick Keenan" wrote:

>

> > "dizzyd" <dizzyd@discussions.microsoft.com> wrote in message

> > news:C04EA350-12CC-45B1-A4A1-3353E79F22B0@microsoft.com...

> > > When i put in my flash drive I was prompted that my usb was not running at

> > > full speed? I believe its the above problem? I have an asus M2NE mobo. The

> > > asus update utility is in accessable. Im gonna look on their website. Is

> > > their a patch for xp missing? Any help most welcome.

> >

> > Do other USB2 devices run at full speed?

> >

> > If not, you may have not installed the motherboard drivers. Your board

> > would have come with a CD that has the drivers necessary to enable USB2

> > speeds.

> >

> > HTH

> > -pk

> >

> >

[Guest dizzyd]

Re: USB is running at 1.1 when its supposed to be usb 2.0

 

The other drivers appear to work normally. I Have a printer, usb music

keyboard and a usb mouse but it is harder to notice with these devices and i

dont remember the running low prompt when pluging them in.

 

"dizzyd" wrote:

>

>

> "dizzyd" wrote:

>

> > Both the mobo usb drivers and asus usb download say if i have service pack 1

> > or more for xp then usb 2.0 should be installed automatically? Whats going

> > on? Does anyone else own an asus M2NE mobo and get a similar occurance when

> > connecting flash drives or other devices? I'd love to get to the bottom of this

> >

> >

> >

> >

> >

> >

> > "Patrick Keenan" wrote:

> >

> > > "dizzyd" <dizzyd@discussions.microsoft.com> wrote in message

> > > news:C04EA350-12CC-45B1-A4A1-3353E79F22B0@microsoft.com...

> > > > When i put in my flash drive I was prompted that my usb was not running at

> > > > full speed? I believe its the above problem? I have an asus M2NE mobo. The

> > > > asus update utility is in accessable. Im gonna look on their website. Is

> > > > their a patch for xp missing? Any help most welcome.

> > >

> > > Do other USB2 devices run at full speed?

> > >

> > > If not, you may have not installed the motherboard drivers. Your board

> > > would have come with a CD that has the drivers necessary to enable USB2

> > > speeds.

> > >

> > > HTH

> > > -pk

> > >

> > >

[Guest Patrick Keenan]

Re: USB is running at 1.1 when its supposed to be usb 2.0

 

"dizzyd" <dizzyd@discussions.microsoft.com> wrote in message

news:7A3FDD5F-52CF-4648-ADB9-8D0C3A055197@microsoft.com...

> Both the mobo usb drivers and asus usb download say if i have service pack

> 1

> or more for xp then usb 2.0 should be installed automatically? Whats going

> on? Does anyone else own an asus M2NE mobo and get a similar occurance

> when

> connecting flash drives or other devices?

 

There are *chipset drivers for the motherboard* that are often needed to do

this.

 

Install the chipset driver and see what you get.

 

HTH

-pk

 

>

>

>

>

>

>

> "Patrick Keenan" wrote:

>

>> "dizzyd" <dizzyd@discussions.microsoft.com> wrote in message

>> news:C04EA350-12CC-45B1-A4A1-3353E79F22B0@microsoft.com...

>> > When i put in my flash drive I was prompted that my usb was not running

>> > at

>> > full speed? I believe its the above problem? I have an asus M2NE mobo.

>> > The

>> > asus update utility is in accessable. Im gonna look on their website.

>> > Is

>> > their a patch for xp missing? Any help most welcome.

>>

>> Do other USB2 devices run at full speed?

>>

>> If not, you may have not installed the motherboard drivers. Your board

>> would have come with a CD that has the drivers necessary to enable USB2

>> speeds.

>>

>> HTH

>> -pk

>>

>>

[Guest Patrick Keenan]

Re: USB is running at 1.1 when its supposed to be usb 2.0

 

"dizzyd" <dizzyd@discussions.microsoft.com> wrote in message

news:6647737A-3A9D-49EE-AB2A-4B5A47B1BAFB@microsoft.com...

> The other drivers appear to work normally. I Have a printer, usb music

> keyboard and a usb mouse but it is harder to notice with these devices and

> i

> dont remember the running low prompt when pluging them in.

 

These may be USB 1 devices, as they can't benefit from the higher speeds of

USB2.

 

As it happens, even USB audio interfaces, 24-bit A/D converters, until

recently only used USB1 as the bandwidth of USB2 isn't needed for stereo

inputs. The newer USB2 devices allow more than 2 simultaneous analog

inputs.

 

You should recheck with devices that you know are USB2.

 

In the meantime, install the chipset drivers from the motherboard CD.

 

HTH

-pk

 

> "dizzyd" wrote:

>

>>

>>

>> "dizzyd" wrote:

>>

>> > Both the mobo usb drivers and asus usb download say if i have service

>> > pack 1

>> > or more for xp then usb 2.0 should be installed automatically? Whats

>> > going

>> > on? Does anyone else own an asus M2NE mobo and get a similar occurance

>> > when

>> > connecting flash drives or other devices? I'd love to get to the bottom

>> > of this

>> >

>> >

>> >

>> >

>> >

>> >

>> > "Patrick Keenan" wrote:

>> >

>> > > "dizzyd" <dizzyd@discussions.microsoft.com> wrote in message

>> > > news:C04EA350-12CC-45B1-A4A1-3353E79F22B0@microsoft.com...

>> > > > When i put in my flash drive I was prompted that my usb was not

>> > > > running at

>> > > > full speed? I believe its the above problem? I have an asus M2NE

>> > > > mobo. The

>> > > > asus update utility is in accessable. Im gonna look on their

>> > > > website. Is

>> > > > their a patch for xp missing? Any help most welcome.

>> > >

>> > > Do other USB2 devices run at full speed?

>> > >

>> > > If not, you may have not installed the motherboard drivers. Your

>> > > board

>> > > would have come with a CD that has the drivers necessary to enable

>> > > USB2

>> > > speeds.

>> > >

>> > > HTH

>> > > -pk

>> > >

>> > >

[Guest Panic]

Re: USB is running at 1.1 when its supposed to be usb 2.0

 

 

"dizzyd" <dizzyd@discussions.microsoft.com> wrote in message

news:C04EA350-12CC-45B1-A4A1-3353E79F22B0@microsoft.com...

> When i put in my flash drive I was prompted that my usb was not running at

> full speed? I believe its the above problem? I have an asus M2NE mobo. The

> asus update utility is in accessable. Im gonna look on their website. Is

> their a patch for xp missing? Any help most welcome.

 

USB devices run at the lowest speed of any of the involved devices. Your

computer has to support 2.0; any USB hub has to be USB2.0; and the device

has to be 2.0.

[Guest Allen]

Re: USB is running at 1.1 when its supposed to be usb 2.0

 

philo wrote:

> "R. McCarty" <PcEngWork-NoSpam_@mindspring.com> wrote in message

> news:e%23Rp9d3wIHA.552@TK2MSFTNGP06.phx.gbl...

>> Cables are cables, USB has 4 conductors. There is no such thing as

>> a USB-1 or USB-2 cable. It's all marketing, The type of Serial data

>> USB uses doesn't care about the Gauge of wire used in the conductors.

>>

>

> **NO**

>

> I recently came across this when friend of mine was trying to access his

> external drive...

> he was using an old USB cable that was appox 1/4" in diameter. He could only

> access the drive at USB1 speed.

>

> When we switched over to a cable that was approx 3/8" in diamater the drive

> was accessed at USB 2 speeds!

>

> It could be the cable!

>

 

Better recheck your measurements. Not even main power cables are 3/8".

Perhaps you meant 1/8" and 3/16". Or maybe you meant circumference, not

diameter.

Allen

[Guest R. McCarty]

Re: USB is running at 1.1 when its supposed to be usb 2.0

 

As far as USB cables are concerned I'm aware of only the length

restriction. Also I made a mistake in stating that USB cables have

only 4 conductors, actually the Mini-USB cable has 5.

 

"Allen" <allen@nothere.net> wrote in message

news:484448c8$0$7039$4c368faf@roadrunner.com...

> philo wrote:

>> "R. McCarty" <PcEngWork-NoSpam_@mindspring.com> wrote in message

>> news:e%23Rp9d3wIHA.552@TK2MSFTNGP06.phx.gbl...

>>> Cables are cables, USB has 4 conductors. There is no such thing as

>>> a USB-1 or USB-2 cable. It's all marketing, The type of Serial data

>>> USB uses doesn't care about the Gauge of wire used in the conductors.

>>>

>>

>> **NO**

>>

>> I recently came across this when friend of mine was trying to access his

>> external drive...

>> he was using an old USB cable that was appox 1/4" in diameter. He could

>> only

>> access the drive at USB1 speed.

>>

>> When we switched over to a cable that was approx 3/8" in diamater the

>> drive

>> was accessed at USB 2 speeds!

>>

>> It could be the cable!

>>

>

> Better recheck your measurements. Not even main power cables are 3/8".

> Perhaps you meant 1/8" and 3/16". Or maybe you meant circumference, not

> diameter.

> Allen