Guest Marcus Posted June 16, 2008 Posted June 16, 2008 I've set up a home server, which acts as a router by using the Routing and Remote Access tool in Windows Server 2003. It works fine, but yesterday my brother told me that he wanted to host an AOC game, so I need to map a bunch of ports (like TCP Ports 28800-29000) to his computer. In Routing and Remote Access tool, I can just map these port one by one. But there are 200 ports in this case! So what can I do to map these ports efficiently. Thank you very much.
Guest Phillip Windell Posted June 16, 2008 Posted June 16, 2008 Re: Map a range a port to a computer in server 2003 Most likely they are outbound,..not inbound. So you don't do anything. RRAS lets everything outbound be default. If they are inbound forget RRAS,...remove (or disable) one nic on the RRAS box and remove RRAS. But a cheap NAT Device (Linksys, DLink, whatever) and replace the RRAS box with the NAT Device. -- Phillip Windell http://www.wandtv.com The views expressed, are my own and not those of my employer, or Microsoft, or anyone else associated with me, including my cats. ----------------------------------------------------- "Marcus" <Marcus@discussions.microsoft.com> wrote in message news:A3D99D8B-7133-4E06-8C36-D282EEAEA2F3@microsoft.com... > I've set up a home server, which acts as a router by using the Routing and > Remote Access tool in Windows Server 2003. > It works fine, but yesterday my brother told me that he wanted to host an > AOC game, so I need to map a bunch of ports (like TCP Ports 28800-29000) > to > his computer. > In Routing and Remote Access tool, I can just map these port one by one. > But > there are 200 ports in this case! So what can I do to map these ports > efficiently. > > Thank you very much.
Recommended Posts