steve161064

I SHUT DOWN TOO NO HARM WAITING BETTER FOR PSU AND INTERNALS I THINK.

HI lollie.. you will get all the help you need on ere no problem. enjoy your stay...

ok thanks mate ill set it at standard and see how i go from there thanks for all your help this is a great forum for help. i have told a lot of my mates about this forum now and they say they going to have a look at it. thanks again steve.

THIS IS MY BIOS READING.. ROBUST GRAPHICS BOOSTER---AUTO. CPU CLOCK RATIO----12X. FINE CPU CLOCK RATIO----+0.5. CPU FREQUENCY---3.18GHZ(255X12.5) CLOCK CHIP CONTROL CPU HOST CLOCK---ENABLED CPU HOST FREQUENCY(MHZ)---(255) PCI FREQUENCY(MHZ)----AUTO C.I.A.2.-----DISABLED DRAM PERFORMANCE CONTROL PERFORMANCE ENHANCE----TURBO (G) MCH FREQUENCY LATCH---AUTO SYSTEM MEMORY MULTIPLIER(SPD)---AUTO MEMORY FREQUENCY(MHZ)----667 850 DRAM TIMING SELECTIBLE (SPD)---AUTO XCAS LATENCY----5 AUTO XTRCD-----5 AUTO XTRP----------5 AUTO XTRAS-------15 AUTO HOPE THIS HELPS TO SEE HOW MY COMPUTER IS RUNNING...........THANKS AGAIN STEVE...

hi thanks for the info mate this has helped me a lot [THANKS TO ALL] who have comented. i am now running at 3.19ghz and seems fine for now. just these ram speeds dont understand much about these. i think in bios ram speed reading is 667 and 800 sounds un balanced to me ....thanks in advance steve p.s. i will get back to you with proper readings on ram thanks again .steve.

ok mate thanks for all the info thinking of putting it all back to stock for now i know wat u mean about addictive was like that few months ago. but built a few rigs since then all stock. catch you 2moz if you on thanks again steve..

sorry thats using speedfan cpu cooler is an artic freezer pro 7.

hi zinglebarbe temp at 42-44 at moment thats using coretemp thanks steve.

thanks for info now changed it in bios to 12x and fsb at 250. in windows now says 3.19ghz in cpuz must of got it wrong fsb changes between x12.5 and x6.0 this is dual core cpu ....thanks steve this board differant from last board i had in bios.

ok zinglebarb ill have a look at things see wat i can change never thought about northbridge.thanks for all the info going to go and have a look at bios now thanks again steve. this is cpuz reading now core voltage---1.120v core speed--1440.1mhz multiplier--x6.0 bus speed--240.0mhz rated fsb--960.1 when i go into windows it says 3.0.ghz thanks steve..

ok thanks toothtech ill have a look on there now get back to you all later......thanks steve.

OK ITS JUST THIS NEW BOARD JUST TRIAL AND ERROR GOT IT TOO 3.2GHZ BUT AFTER SO LONG GET BLUE SCREEN. SO VOLTAGE PROB I THINK.......NOT OVERCLOCKED FOR FEW MONTH NOW JUST THOUGHT ID ASK A FEW QUESTIONS TO SEE IF ANYBODY WOULD HAVE ANY ANSWERS THANKS AGAIN STEVE..

ok thanks for the info i think ill leave it on auto then seems to be ok at the moment. can you tell me wat you run the bus at and multiplier thanks steve..

sorted the other comp now ..the abit a17. just another question if you can help. my computer is a custom build its a gigabyte ga-ep43-ds3l/s3l motherboard with an e5200 2.50ghz cpu. and 2gb kingston ram. i have overclocked to 2.80ghz but wat would you say is the best voltage to set this at.............thanks in advance steve.....ps the cpu cooler is an artic freezer pro 7...........thanks ...steve

re graphics card problem hi i have saved the site to my favorouits list. im sure i will be here again sometime as people are realy helpful on ere. i have told my mates at work about your site so if they get stuck with anything they will get help realy quick on your site. my next attempt to upgrade is a new processer as the one i have at moment is a 2.80 ghz. this will be in the near future i hope..........thanks again for all your help steve :D

re graphics card problem hi sorry took so long to get back to you. got graphics card working now. i lost a vital file in windows and had to swap to my old hard drive to sort it or i would had have to reformat my hardrive ...thanks for all your help.steve..

re graphics card problem hi thanks again will try this later and will get back to you as everyone still in bed at my house at moment .thanks again steve.

re graphics card problem hi thanks for getting back to me again...yes i plug moniter into new card and i get the loading sreen then as it trys to go into windows i just get black sreen. i can get into bios with new card in ..........thanks again steve.

re graphics card hi me again enabled pci/vga.and still does not work still get black sreen...had graphics card tested no problems with graphics card. is there anything else i can try......thanks steve.:confused:

re graphics card hi thanks for all the help you have given me.....yes it does have options but not touched these........it just says press enter i am going to put graphics card in today again and try what you have told me. i will get back to you and let you know how i got on. also i have told a few of my friends about the site and how helpful you have been..this site now is top of my favourits list. thanks and keep up the good work..........steve...great site.

re graphics card problem this is what i see in intergrated periferals..... SIS ONCHIP IDE DEVICE. SIS ONCHIP PCI DEVICE. ONBOARD SUPER IO DEVICE. INIT DISPLAY FIRST...(AGP)is this right do i just enable pci/vga in pnp/pci.. because in pnp/pci its somthing saying ESCD BUT THIS IS ALSO DISABLED. DO I ENABLE THIS TO....THANKS STEVE.

re graphics card do i just enable pci/vga and it will see my new graphics card .then install the drivers when i get back into windows....thanks.steve.

re graphics card hi tried going into pnp/pci it says...PCI/VGA .....DEISABLED. that is with no graphics card in my motherboard. will it show A.G.P. when i put graphics card in A.G.P. slot. it just says enable /disable. .thanks .steve.

re graphics card problem ok i will try that tomorrow and let you know on this post thanks for all the help. thanks for getting back to me. im at work in morning at 4.30 am so dont think i have enough time to sort out tonight.......thanks.....steve.

re..graphics card hi sorry about this all this new to me(BIOS) .when i put graphics card in i just get a black screen so can not do anything .take it out and plug back into motherboard graphics and my computer displays ok.think this is what you mean by onboard graphics i hope.but dont know how to enable the other card which i put in.........sorry .steve.