Jump to content

3124_vista_x64_logo_1.1.13.0 & SiI3726 Firmware won't install

Guest Denise

By Guest Denise
in Windows XP 64 Bit

 Share

Recommended Posts

Guest Denise

Guest Denise

Posted
Posted

I'm having a lot of problems installing Vista x64 software/firmware. Vista

x64 installed with no problems.

 

I need to install 3124_vista_x64_logo_1.1.13.0 and SiI3726 Firmware and

Firmware Update Utility for the NORCO-4618 Controller Card.

 

I'm able to install only about 1/4 of the programs that I use. Does anyone

have an idea why I can't install Vista x64 programs:

 

This is a list of my pc components:

 

- ASUS A8V-VM SE Socket 939 Micro ATX Motherboard - UDMA133, SATA (RAID)

.. . . . VIA K8M890 + VT8237A

.. . . . 2000/1600 HT/s

.. . . . Dual-channel DDR400, Max 2GB

.. . . . VIA Integrated Gfx in North Bridge K8M890

.. . . . 1 x PCI-E X16, 1 X PCI-E X 1, 2X PCI

.. . . . 2 *ATA133 ,2 x SATA

.. . . . 10/100 LAN

.. . . . 6-Channel audio

- Seagate Barracuda 7200.10 SATA 3.0 Gb/s 320Gb hard drive (RAID array not

set up)

- AMD Athlon Gforce 8400 64 X2 4200+ Toledo 2.2GHz 2 x 512KB L2 Cache Socket

939 Processor

- ARCTIC COOLING Freezer 64 Pro 92mm CPU Cooler

- Corsair 620W PSU

- Ballistix 2x1G RAM, 184-pin DIMM, 128MX64 DDR PC3200, Unbuffered

- NORCO-4618 PCI-X / PCI eSATA / SATA II / SATA I Controller Card RAID

0/1/5/10/JBOD

 

--

Denise

  • Replies 15
  • Created
  • Last Reply

Popular Days

Popular Days

Guest Bobby Johnson

Guest Bobby Johnson

Posted
Posted

Re: 3124_vista_x64_logo_1.1.13.0 & SiI3726 Firmware won't install

 

Based on what you have posted so far, you need to purchase

new hardware to support Vista or go back to XP. Those are

your 2 choices.

 

If the manufacturer/vendor of the hardware doesn't have

drivers to support Vista there is absolutely nothing you can

do about it.

 

 

Denise wrote:

> I'm having a lot of problems installing Vista x64 software/firmware. Vista

> x64 installed with no problems.

>

> I need to install 3124_vista_x64_logo_1.1.13.0 and SiI3726 Firmware and

> Firmware Update Utility for the NORCO-4618 Controller Card.

>

> I'm able to install only about 1/4 of the programs that I use. Does anyone

> have an idea why I can't install Vista x64 programs:

>

> This is a list of my pc components:

>

> - ASUS A8V-VM SE Socket 939 Micro ATX Motherboard - UDMA133, SATA (RAID)

> . . . . VIA K8M890 + VT8237A

> . . . . 2000/1600 HT/s

> . . . . Dual-channel DDR400, Max 2GB

> . . . . VIA Integrated Gfx in North Bridge K8M890

> . . . . 1 x PCI-E X16, 1 X PCI-E X 1, 2X PCI

> . . . . 2 *ATA133 ,2 x SATA

> . . . . 10/100 LAN

> . . . . 6-Channel audio

> - Seagate Barracuda 7200.10 SATA 3.0 Gb/s 320Gb hard drive (RAID array not

> set up)

> - AMD Athlon Gforce 8400 64 X2 4200+ Toledo 2.2GHz 2 x 512KB L2 Cache Socket

> 939 Processor

> - ARCTIC COOLING Freezer 64 Pro 92mm CPU Cooler

> - Corsair 620W PSU

> - Ballistix 2x1G RAM, 184-pin DIMM, 128MX64 DDR PC3200, Unbuffered

> - NORCO-4618 PCI-X / PCI eSATA / SATA II / SATA I Controller Card RAID

> 0/1/5/10/JBOD

>

Guest Tom Ferguson

Guest Tom Ferguson

Posted
Posted

Re: 3124_vista_x64_logo_1.1.13.0 & SiI3726 Firmware won't install

 

Hi,

 

I'm not sure just how much help I can be. So, If you don't mind,a couple of

questions first. Has Vista 64 been installed and successfully run on this

computer before?

 

Is the NORCO controller for SATA II-RAID (5-connectors) and is it PCI or

PCI-Express?

 

DO you have the DVD that usually comes with the motherboard?

--

 

Tom

MSMVP 1998-2007

 

 

 

 

"Denise" <Denise@discussions.microsoft.com> wrote in message

news:E9D48C6B-0372-4897-8215-F075B0A4369B@microsoft.com...

> I'm having a lot of problems installing Vista x64 software/firmware.

> Vista

> x64 installed with no problems.

>

> I need to install 3124_vista_x64_logo_1.1.13.0 and SiI3726 Firmware and

> Firmware Update Utility for the NORCO-4618 Controller Card.

>

> I'm able to install only about 1/4 of the programs that I use. Does

> anyone

> have an idea why I can't install Vista x64 programs:

>

> This is a list of my pc components:

>

> - ASUS A8V-VM SE Socket 939 Micro ATX Motherboard - UDMA133, SATA (RAID)

> . . . . VIA K8M890 + VT8237A

> . . . . 2000/1600 HT/s

> . . . . Dual-channel DDR400, Max 2GB

> . . . . VIA Integrated Gfx in North Bridge K8M890

> . . . . 1 x PCI-E X16, 1 X PCI-E X 1, 2X PCI

> . . . . 2 *ATA133 ,2 x SATA

> . . . . 10/100 LAN

> . . . . 6-Channel audio

> - Seagate Barracuda 7200.10 SATA 3.0 Gb/s 320Gb hard drive (RAID array not

> set up)

> - AMD Athlon Gforce 8400 64 X2 4200+ Toledo 2.2GHz 2 x 512KB L2 Cache

> Socket

> 939 Processor

> - ARCTIC COOLING Freezer 64 Pro 92mm CPU Cooler

> - Corsair 620W PSU

> - Ballistix 2x1G RAM, 184-pin DIMM, 128MX64 DDR PC3200, Unbuffered

> - NORCO-4618 PCI-X / PCI eSATA / SATA II / SATA I Controller Card RAID

> 0/1/5/10/JBOD

>

> --

> Denise

>

>

Guest andy

Guest andy

Posted
Posted

Re: 3124_vista_x64_logo_1.1.13.0 & SiI3726 Firmware won't install

 

On Tue, 1 Jul 2008 15:29:00 -0700, Denise

<Denise@discussions.microsoft.com> wrote:

>I'm having a lot of problems installing Vista x64 software/firmware. Vista

>x64 installed with no problems.

>

>I need to install 3124_vista_x64_logo_1.1.13.0 and SiI3726 Firmware and

>Firmware Update Utility for the NORCO-4618 Controller Card.

 

The NORCO-4618 uses the Silicon Image SiI3124-2 chip

(http://www.siliconimage.com/support/supportsearchresults.aspx?pid=27&cid=15&ctid=2&osid=0&),

not the SiI3726.

>

>I'm able to install only about 1/4 of the programs that I use. Does anyone

>have an idea why I can't install Vista x64 programs:

>

>This is a list of my pc components:

>

>- ASUS A8V-VM SE Socket 939 Micro ATX Motherboard - UDMA133, SATA (RAID)

>. . . . VIA K8M890 + VT8237A

>. . . . 2000/1600 HT/s

>. . . . Dual-channel DDR400, Max 2GB

>. . . . VIA Integrated Gfx in North Bridge K8M890

>. . . . 1 x PCI-E X16, 1 X PCI-E X 1, 2X PCI

>. . . . 2 *ATA133 ,2 x SATA

>. . . . 10/100 LAN

>. . . . 6-Channel audio

>- Seagate Barracuda 7200.10 SATA 3.0 Gb/s 320Gb hard drive (RAID array not

>set up)

>- AMD Athlon Gforce 8400 64 X2 4200+ Toledo 2.2GHz 2 x 512KB L2 Cache Socket

>939 Processor

>- ARCTIC COOLING Freezer 64 Pro 92mm CPU Cooler

>- Corsair 620W PSU

>- Ballistix 2x1G RAM, 184-pin DIMM, 128MX64 DDR PC3200, Unbuffered

>- NORCO-4618 PCI-X / PCI eSATA / SATA II / SATA I Controller Card RAID

>0/1/5/10/JBOD

Guest Denise

Guest Denise

Posted
Posted

Re: 3124_vista_x64_logo_1.1.13.0 & SiI3726 Firmware won't install

 

Vista x64 wasn't previously installed on my pc. I started out with XP Pro

x64 but wanted to switch to Vista x64 because it appears that Microsoft has

left XP Pro x64 behind and is running with Vista x64.

 

The Norco controller card is for SATA II. I don't have a RAID Array set up.

I connect my SATA II ext hdds to it. I don't have my motherboard's manual

with me and I can't remember the name of the port right now but it's

connected to the "long" port. It always worked very well with XP Pro x64

after I installed the software and firmware for it.

 

I have the motherboard's installation disk but Vista x64 wouldn't install

it. I tried it to auto run and manually.

--

Denise

 

 

 

 

"Tom Ferguson" wrote:

> Hi,

>

> I'm not sure just how much help I can be. So, If you don't mind,a couple of

> questions first. Has Vista 64 been installed and successfully run on this

> computer before?

>

> Is the NORCO controller for SATA II-RAID (5-connectors) and is it PCI or

> PCI-Express?

>

> DO you have the DVD that usually comes with the motherboard?

> --

>

> Tom

> MSMVP 1998-2007

>

>

>

>

> "Denise" <Denise@discussions.microsoft.com> wrote in message

> news:E9D48C6B-0372-4897-8215-F075B0A4369B@microsoft.com...

> > I'm having a lot of problems installing Vista x64 software/firmware.

> > Vista

> > x64 installed with no problems.

> >

> > I need to install 3124_vista_x64_logo_1.1.13.0 and SiI3726 Firmware and

> > Firmware Update Utility for the NORCO-4618 Controller Card.

> >

> > I'm able to install only about 1/4 of the programs that I use. Does

> > anyone

> > have an idea why I can't install Vista x64 programs:

> >

> > This is a list of my pc components:

> >

> > - ASUS A8V-VM SE Socket 939 Micro ATX Motherboard - UDMA133, SATA (RAID)

> > . . . . VIA K8M890 + VT8237A

> > . . . . 2000/1600 HT/s

> > . . . . Dual-channel DDR400, Max 2GB

> > . . . . VIA Integrated Gfx in North Bridge K8M890

> > . . . . 1 x PCI-E X16, 1 X PCI-E X 1, 2X PCI

> > . . . . 2 *ATA133 ,2 x SATA

> > . . . . 10/100 LAN

> > . . . . 6-Channel audio

> > - Seagate Barracuda 7200.10 SATA 3.0 Gb/s 320Gb hard drive (RAID array not

> > set up)

> > - AMD Athlon Gforce 8400 64 X2 4200+ Toledo 2.2GHz 2 x 512KB L2 Cache

> > Socket

> > 939 Processor

> > - ARCTIC COOLING Freezer 64 Pro 92mm CPU Cooler

> > - Corsair 620W PSU

> > - Ballistix 2x1G RAM, 184-pin DIMM, 128MX64 DDR PC3200, Unbuffered

> > - NORCO-4618 PCI-X / PCI eSATA / SATA II / SATA I Controller Card RAID

> > 0/1/5/10/JBOD

> >

> > --

> > Denise

> >

> >

>

>

Guest Denise

Guest Denise

Posted
Posted

Re: 3124_vista_x64_logo_1.1.13.0 & SiI3726 Firmware won't install

 

According to the manufacturer of a SATA hub that I purchased, I need both.

3124 is for the controller card and 3726 is for the hub. The hub wouldn't

turn on so I returned it to the manufacturer for a replacement so I can't say

how a working replacement will work with 3726 installed.

--

Denise

 

~ If you don''t know where you came from, you won''t know where you''re going.

 

 

"andy" wrote:

> On Tue, 1 Jul 2008 15:29:00 -0700, Denise

> <Denise@discussions.microsoft.com> wrote:

>

> >I'm having a lot of problems installing Vista x64 software/firmware. Vista

> >x64 installed with no problems.

> >

> >I need to install 3124_vista_x64_logo_1.1.13.0 and SiI3726 Firmware and

> >Firmware Update Utility for the NORCO-4618 Controller Card.

>

> The NORCO-4618 uses the Silicon Image SiI3124-2 chip

> (http://www.siliconimage.com/support/supportsearchresults.aspx?pid=27&cid=15&ctid=2&osid=0&),

> not the SiI3726.

>

> >

> >I'm able to install only about 1/4 of the programs that I use. Does anyone

> >have an idea why I can't install Vista x64 programs:

> >

> >This is a list of my pc components:

> >

> >- ASUS A8V-VM SE Socket 939 Micro ATX Motherboard - UDMA133, SATA (RAID)

> >. . . . VIA K8M890 + VT8237A

> >. . . . 2000/1600 HT/s

> >. . . . Dual-channel DDR400, Max 2GB

> >. . . . VIA Integrated Gfx in North Bridge K8M890

> >. . . . 1 x PCI-E X16, 1 X PCI-E X 1, 2X PCI

> >. . . . 2 *ATA133 ,2 x SATA

> >. . . . 10/100 LAN

> >. . . . 6-Channel audio

> >- Seagate Barracuda 7200.10 SATA 3.0 Gb/s 320Gb hard drive (RAID array not

> >set up)

> >- AMD Athlon Gforce 8400 64 X2 4200+ Toledo 2.2GHz 2 x 512KB L2 Cache Socket

> >939 Processor

> >- ARCTIC COOLING Freezer 64 Pro 92mm CPU Cooler

> >- Corsair 620W PSU

> >- Ballistix 2x1G RAM, 184-pin DIMM, 128MX64 DDR PC3200, Unbuffered

> >- NORCO-4618 PCI-X / PCI eSATA / SATA II / SATA I Controller Card RAID

> >0/1/5/10/JBOD

>

>

Guest Tom Ferguson

Guest Tom Ferguson

Posted
Posted

Re: 3124_vista_x64_logo_1.1.13.0 & SiI3726 Firmware won't install

 

OK. So Vista 64 is now installed and running _except_ you cannot use your

external SATA drives (the Norco controller is not working). And you cannot

get some of your software to install.

 

Is that the situation?

 

Thanks in advance.

--

 

Tom

MSMVP 1998-2007

 

 

"Denise" <Denise@discussions.microsoft.com> wrote in message

news:718758B8-EF8A-4DB5-9745-5F49EC12CB37@microsoft.com...

> Vista x64 wasn't previously installed on my pc. I started out with XP Pro

> x64 but wanted to switch to Vista x64 because it appears that Microsoft

> has

> left XP Pro x64 behind and is running with Vista x64.

>

> The Norco controller card is for SATA II. I don't have a RAID Array set

> up.

> I connect my SATA II ext hdds to it. I don't have my motherboard's manual

> with me and I can't remember the name of the port right now but it's

> connected to the "long" port. It always worked very well with XP Pro x64

> after I installed the software and firmware for it.

>

> I have the motherboard's installation disk but Vista x64 wouldn't install

> it. I tried it to auto run and manually.

> --

> Denise

>

>

>

>

> "Tom Ferguson" wrote:

>

>> Hi,

>>

>> I'm not sure just how much help I can be. So, If you don't mind,a couple

>> of

>> questions first. Has Vista 64 been installed and successfully run on this

>> computer before?

>>

>> Is the NORCO controller for SATA II-RAID (5-connectors) and is it PCI or

>> PCI-Express?

>>

>> DO you have the DVD that usually comes with the motherboard?

>> --

>>

>> Tom

>> MSMVP 1998-2007

>>

>>

>>

>>

>> "Denise" <Denise@discussions.microsoft.com> wrote in message

>> news:E9D48C6B-0372-4897-8215-F075B0A4369B@microsoft.com...

>> > I'm having a lot of problems installing Vista x64 software/firmware.

>> > Vista

>> > x64 installed with no problems.

>> >

>> > I need to install 3124_vista_x64_logo_1.1.13.0 and SiI3726 Firmware and

>> > Firmware Update Utility for the NORCO-4618 Controller Card.

>> >

>> > I'm able to install only about 1/4 of the programs that I use. Does

>> > anyone

>> > have an idea why I can't install Vista x64 programs:

>> >

>> > This is a list of my pc components:

>> >

>> > - ASUS A8V-VM SE Socket 939 Micro ATX Motherboard - UDMA133, SATA

>> > (RAID)

>> > . . . . VIA K8M890 + VT8237A

>> > . . . . 2000/1600 HT/s

>> > . . . . Dual-channel DDR400, Max 2GB

>> > . . . . VIA Integrated Gfx in North Bridge K8M890

>> > . . . . 1 x PCI-E X16, 1 X PCI-E X 1, 2X PCI

>> > . . . . 2 *ATA133 ,2 x SATA

>> > . . . . 10/100 LAN

>> > . . . . 6-Channel audio

>> > - Seagate Barracuda 7200.10 SATA 3.0 Gb/s 320Gb hard drive (RAID array

>> > not

>> > set up)

>> > - AMD Athlon Gforce 8400 64 X2 4200+ Toledo 2.2GHz 2 x 512KB L2 Cache

>> > Socket

>> > 939 Processor

>> > - ARCTIC COOLING Freezer 64 Pro 92mm CPU Cooler

>> > - Corsair 620W PSU

>> > - Ballistix 2x1G RAM, 184-pin DIMM, 128MX64 DDR PC3200, Unbuffered

>> > - NORCO-4618 PCI-X / PCI eSATA / SATA II / SATA I Controller Card RAID

>> > 0/1/5/10/JBOD

>> >

>> > --

>> > Denise

>> >

>> >

>>

>>

Guest Denise

Guest Denise

Posted
Posted

Re: 3124_vista_x64_logo_1.1.13.0 & SiI3726 Firmware won't install

 

Since I couldn't get programs to run because I received a message that said

that they were "missing a file," and because Vista x64 wouldn't install my

motherboard's software, and because I couldn't get Vista x64 to install

Silicon Image files that I needed for my controller card and SATA hub, I

decided to format back to XP Pro x64. My computer components aren't

compatible with Vista x64.

--

Denise

 

 

 

 

"Tom Ferguson" wrote:

> OK. So Vista 64 is now installed and running _except_ you cannot use your

> external SATA drives (the Norco controller is not working). And you cannot

> get some of your software to install.

>

> Is that the situation?

>

> Thanks in advance.

> --

>

> Tom

> MSMVP 1998-2007

>

>

> "Denise" <Denise@discussions.microsoft.com> wrote in message

> news:718758B8-EF8A-4DB5-9745-5F49EC12CB37@microsoft.com...

> > Vista x64 wasn't previously installed on my pc. I started out with XP Pro

> > x64 but wanted to switch to Vista x64 because it appears that Microsoft

> > has

> > left XP Pro x64 behind and is running with Vista x64.

> >

> > The Norco controller card is for SATA II. I don't have a RAID Array set

> > up.

> > I connect my SATA II ext hdds to it. I don't have my motherboard's manual

> > with me and I can't remember the name of the port right now but it's

> > connected to the "long" port. It always worked very well with XP Pro x64

> > after I installed the software and firmware for it.

> >

> > I have the motherboard's installation disk but Vista x64 wouldn't install

> > it. I tried it to auto run and manually.

> > --

> > Denise

> >

> >

> >

> >

> > "Tom Ferguson" wrote:

> >

> >> Hi,

> >>

> >> I'm not sure just how much help I can be. So, If you don't mind,a couple

> >> of

> >> questions first. Has Vista 64 been installed and successfully run on this

> >> computer before?

> >>

> >> Is the NORCO controller for SATA II-RAID (5-connectors) and is it PCI or

> >> PCI-Express?

> >>

> >> DO you have the DVD that usually comes with the motherboard?

> >> --

> >>

> >> Tom

> >> MSMVP 1998-2007

> >>

> >>

> >>

> >>

> >> "Denise" <Denise@discussions.microsoft.com> wrote in message

> >> news:E9D48C6B-0372-4897-8215-F075B0A4369B@microsoft.com...

> >> > I'm having a lot of problems installing Vista x64 software/firmware.

> >> > Vista

> >> > x64 installed with no problems.

> >> >

> >> > I need to install 3124_vista_x64_logo_1.1.13.0 and SiI3726 Firmware and

> >> > Firmware Update Utility for the NORCO-4618 Controller Card.

> >> >

> >> > I'm able to install only about 1/4 of the programs that I use. Does

> >> > anyone

> >> > have an idea why I can't install Vista x64 programs:

> >> >

> >> > This is a list of my pc components:

> >> >

> >> > - ASUS A8V-VM SE Socket 939 Micro ATX Motherboard - UDMA133, SATA

> >> > (RAID)

> >> > . . . . VIA K8M890 + VT8237A

> >> > . . . . 2000/1600 HT/s

> >> > . . . . Dual-channel DDR400, Max 2GB

> >> > . . . . VIA Integrated Gfx in North Bridge K8M890

> >> > . . . . 1 x PCI-E X16, 1 X PCI-E X 1, 2X PCI

> >> > . . . . 2 *ATA133 ,2 x SATA

> >> > . . . . 10/100 LAN

> >> > . . . . 6-Channel audio

> >> > - Seagate Barracuda 7200.10 SATA 3.0 Gb/s 320Gb hard drive (RAID array

> >> > not

> >> > set up)

> >> > - AMD Athlon Gforce 8400 64 X2 4200+ Toledo 2.2GHz 2 x 512KB L2 Cache

> >> > Socket

> >> > 939 Processor

> >> > - ARCTIC COOLING Freezer 64 Pro 92mm CPU Cooler

> >> > - Corsair 620W PSU

> >> > - Ballistix 2x1G RAM, 184-pin DIMM, 128MX64 DDR PC3200, Unbuffered

> >> > - NORCO-4618 PCI-X / PCI eSATA / SATA II / SATA I Controller Card RAID

> >> > 0/1/5/10/JBOD

> >> >

> >> > --

> >> > Denise

> >> >

> >> >

> >>

> >>

>

>

Guest Tom Ferguson

Guest Tom Ferguson

Posted
Posted

Re: 3124_vista_x64_logo_1.1.13.0 & SiI3726 Firmware won't install

 

Understandable. Perhaps dual booting would be an option for you. It would

allow you to try out Vista 64 bit as you locate compatible software for your

needs.

 

For whatever its worth to you:

There does appear to be support files for the Norco controller for Vista 64

on the www site of the Silicon Image chip maker.

http://www.sci-worx.com/support/supportsearchresults.aspx?pid=27&cid=3&ctid=2&osid=10&

Note that the URL ends with an &. That might have to be typed into the

browser if you use copy/paste.

 

I believe the Asus MoBo is Vista 64 compatible. However, you would have to

download a bunch of files and make them available to supply the needed

drivers after you install Vista. I would burn them to a CD. Makes it easier

to keep them for any needed later use as well.

http://support.asus.com/download/download.aspx?SLanguage=en-us

 

All the best.

--

 

Tom

MSMVP 1998-2007

 

 

 

"Denise" <Denise@discussions.microsoft.com> wrote in message

news:0401BA0C-06C0-462A-AC0B-213755FB2451@microsoft.com...

> Since I couldn't get programs to run because I received a message that

> said

> that they were "missing a file," and because Vista x64 wouldn't install my

> motherboard's software, and because I couldn't get Vista x64 to install

> Silicon Image files that I needed for my controller card and SATA hub, I

> decided to format back to XP Pro x64. My computer components aren't

> compatible with Vista x64.

> --

> Denise

>

>

>

>

> "Tom Ferguson" wrote:

>

>> OK. So Vista 64 is now installed and running _except_ you cannot use your

>> external SATA drives (the Norco controller is not working). And you

>> cannot

>> get some of your software to install.

>>

>> Is that the situation?

>>

>> Thanks in advance.

>> --

>>

>> Tom

>> MSMVP 1998-2007

>>

>>

>> "Denise" <Denise@discussions.microsoft.com> wrote in message

>> news:718758B8-EF8A-4DB5-9745-5F49EC12CB37@microsoft.com...

>> > Vista x64 wasn't previously installed on my pc. I started out with XP

>> > Pro

>> > x64 but wanted to switch to Vista x64 because it appears that Microsoft

>> > has

>> > left XP Pro x64 behind and is running with Vista x64.

>> >

>> > The Norco controller card is for SATA II. I don't have a RAID Array

>> > set

>> > up.

>> > I connect my SATA II ext hdds to it. I don't have my motherboard's

>> > manual

>> > with me and I can't remember the name of the port right now but it's

>> > connected to the "long" port. It always worked very well with XP Pro

>> > x64

>> > after I installed the software and firmware for it.

>> >

>> > I have the motherboard's installation disk but Vista x64 wouldn't

>> > install

>> > it. I tried it to auto run and manually.

>> > --

>> > Denise

>> >

>> >

>> >

>> >

>> > "Tom Ferguson" wrote:

>> >

>> >> Hi,

>> >>

>> >> I'm not sure just how much help I can be. So, If you don't mind,a

>> >> couple

>> >> of

>> >> questions first. Has Vista 64 been installed and successfully run on

>> >> this

>> >> computer before?

>> >>

>> >> Is the NORCO controller for SATA II-RAID (5-connectors) and is it PCI

>> >> or

>> >> PCI-Express?

>> >>

>> >> DO you have the DVD that usually comes with the motherboard?

>> >> --

>> >>

>> >> Tom

>> >> MSMVP 1998-2007

>> >>

>> >>

>> >>

>> >>

>> >> "Denise" <Denise@discussions.microsoft.com> wrote in message

>> >> news:E9D48C6B-0372-4897-8215-F075B0A4369B@microsoft.com...

>> >> > I'm having a lot of problems installing Vista x64 software/firmware.

>> >> > Vista

>> >> > x64 installed with no problems.

>> >> >

>> >> > I need to install 3124_vista_x64_logo_1.1.13.0 and SiI3726 Firmware

>> >> > and

>> >> > Firmware Update Utility for the NORCO-4618 Controller Card.

>> >> >

>> >> > I'm able to install only about 1/4 of the programs that I use. Does

>> >> > anyone

>> >> > have an idea why I can't install Vista x64 programs:

>> >> >

>> >> > This is a list of my pc components:

>> >> >

>> >> > - ASUS A8V-VM SE Socket 939 Micro ATX Motherboard - UDMA133, SATA

>> >> > (RAID)

>> >> > . . . . VIA K8M890 + VT8237A

>> >> > . . . . 2000/1600 HT/s

>> >> > . . . . Dual-channel DDR400, Max 2GB

>> >> > . . . . VIA Integrated Gfx in North Bridge K8M890

>> >> > . . . . 1 x PCI-E X16, 1 X PCI-E X 1, 2X PCI

>> >> > . . . . 2 *ATA133 ,2 x SATA

>> >> > . . . . 10/100 LAN

>> >> > . . . . 6-Channel audio

>> >> > - Seagate Barracuda 7200.10 SATA 3.0 Gb/s 320Gb hard drive (RAID

>> >> > array

>> >> > not

>> >> > set up)

>> >> > - AMD Athlon Gforce 8400 64 X2 4200+ Toledo 2.2GHz 2 x 512KB L2

>> >> > Cache

>> >> > Socket

>> >> > 939 Processor

>> >> > - ARCTIC COOLING Freezer 64 Pro 92mm CPU Cooler

>> >> > - Corsair 620W PSU

>> >> > - Ballistix 2x1G RAM, 184-pin DIMM, 128MX64 DDR PC3200, Unbuffered

>> >> > - NORCO-4618 PCI-X / PCI eSATA / SATA II / SATA I Controller Card

>> >> > RAID

>> >> > 0/1/5/10/JBOD

>> >> >

>> >> > --

>> >> > Denise

>> >> >

>> >> >

>> >>

>> >>

>>

>>

Guest Denise

Guest Denise

Posted
Posted

Re: 3124_vista_x64_logo_1.1.13.0 & SiI3726 Firmware won't install

 

I downloaded the Vista x64 drivers and firmware but it wouldn't install them.

I think that, because my motherboard software wouldn't install, nothing

would've worked right. I could've gone around the net, picking up files here

and there to replace those on my motherboard disk, but it wouldn't have been

worth it.

--

Denise

 

 

 

 

"Tom Ferguson" wrote:

> Understandable. Perhaps dual booting would be an option for you. It would

> allow you to try out Vista 64 bit as you locate compatible software for your

> needs.

>

> For whatever its worth to you:

> There does appear to be support files for the Norco controller for Vista 64

> on the www site of the Silicon Image chip maker.

> http://www.sci-worx.com/support/supportsearchresults.aspx?pid=27&cid=3&ctid=2&osid=10&

> Note that the URL ends with an &. That might have to be typed into the

> browser if you use copy/paste.

>

> I believe the Asus MoBo is Vista 64 compatible. However, you would have to

> download a bunch of files and make them available to supply the needed

> drivers after you install Vista. I would burn them to a CD. Makes it easier

> to keep them for any needed later use as well.

> http://support.asus.com/download/download.aspx?SLanguage=en-us

>

> All the best.

> --

>

> Tom

> MSMVP 1998-2007

>

>

>

> "Denise" <Denise@discussions.microsoft.com> wrote in message

> news:0401BA0C-06C0-462A-AC0B-213755FB2451@microsoft.com...

> > Since I couldn't get programs to run because I received a message that

> > said

> > that they were "missing a file," and because Vista x64 wouldn't install my

> > motherboard's software, and because I couldn't get Vista x64 to install

> > Silicon Image files that I needed for my controller card and SATA hub, I

> > decided to format back to XP Pro x64. My computer components aren't

> > compatible with Vista x64.

> > --

> > Denise

> >

> >

> >

> >

> > "Tom Ferguson" wrote:

> >

> >> OK. So Vista 64 is now installed and running _except_ you cannot use your

> >> external SATA drives (the Norco controller is not working). And you

> >> cannot

> >> get some of your software to install.

> >>

> >> Is that the situation?

> >>

> >> Thanks in advance.

> >> --

> >>

> >> Tom

> >> MSMVP 1998-2007

> >>

> >>

> >> "Denise" <Denise@discussions.microsoft.com> wrote in message

> >> news:718758B8-EF8A-4DB5-9745-5F49EC12CB37@microsoft.com...

> >> > Vista x64 wasn't previously installed on my pc. I started out with XP

> >> > Pro

> >> > x64 but wanted to switch to Vista x64 because it appears that Microsoft

> >> > has

> >> > left XP Pro x64 behind and is running with Vista x64.

> >> >

> >> > The Norco controller card is for SATA II. I don't have a RAID Array

> >> > set

> >> > up.

> >> > I connect my SATA II ext hdds to it. I don't have my motherboard's

> >> > manual

> >> > with me and I can't remember the name of the port right now but it's

> >> > connected to the "long" port. It always worked very well with XP Pro

> >> > x64

> >> > after I installed the software and firmware for it.

> >> >

> >> > I have the motherboard's installation disk but Vista x64 wouldn't

> >> > install

> >> > it. I tried it to auto run and manually.

> >> > --

> >> > Denise

> >> >

> >> >

> >> >

> >> >

> >> > "Tom Ferguson" wrote:

> >> >

> >> >> Hi,

> >> >>

> >> >> I'm not sure just how much help I can be. So, If you don't mind,a

> >> >> couple

> >> >> of

> >> >> questions first. Has Vista 64 been installed and successfully run on

> >> >> this

> >> >> computer before?

> >> >>

> >> >> Is the NORCO controller for SATA II-RAID (5-connectors) and is it PCI

> >> >> or

> >> >> PCI-Express?

> >> >>

> >> >> DO you have the DVD that usually comes with the motherboard?

> >> >> --

> >> >>

> >> >> Tom

> >> >> MSMVP 1998-2007

> >> >>

> >> >>

> >> >>

> >> >>

> >> >> "Denise" <Denise@discussions.microsoft.com> wrote in message

> >> >> news:E9D48C6B-0372-4897-8215-F075B0A4369B@microsoft.com...

> >> >> > I'm having a lot of problems installing Vista x64 software/firmware.

> >> >> > Vista

> >> >> > x64 installed with no problems.

> >> >> >

> >> >> > I need to install 3124_vista_x64_logo_1.1.13.0 and SiI3726 Firmware

> >> >> > and

> >> >> > Firmware Update Utility for the NORCO-4618 Controller Card.

> >> >> >

> >> >> > I'm able to install only about 1/4 of the programs that I use. Does

> >> >> > anyone

> >> >> > have an idea why I can't install Vista x64 programs:

> >> >> >

> >> >> > This is a list of my pc components:

> >> >> >

> >> >> > - ASUS A8V-VM SE Socket 939 Micro ATX Motherboard - UDMA133, SATA

> >> >> > (RAID)

> >> >> > . . . . VIA K8M890 + VT8237A

> >> >> > . . . . 2000/1600 HT/s

> >> >> > . . . . Dual-channel DDR400, Max 2GB

> >> >> > . . . . VIA Integrated Gfx in North Bridge K8M890

> >> >> > . . . . 1 x PCI-E X16, 1 X PCI-E X 1, 2X PCI

> >> >> > . . . . 2 *ATA133 ,2 x SATA

> >> >> > . . . . 10/100 LAN

> >> >> > . . . . 6-Channel audio

> >> >> > - Seagate Barracuda 7200.10 SATA 3.0 Gb/s 320Gb hard drive (RAID

> >> >> > array

> >> >> > not

> >> >> > set up)

> >> >> > - AMD Athlon Gforce 8400 64 X2 4200+ Toledo 2.2GHz 2 x 512KB L2

> >> >> > Cache

> >> >> > Socket

> >> >> > 939 Processor

> >> >> > - ARCTIC COOLING Freezer 64 Pro 92mm CPU Cooler

> >> >> > - Corsair 620W PSU

> >> >> > - Ballistix 2x1G RAM, 184-pin DIMM, 128MX64 DDR PC3200, Unbuffered

> >> >> > - NORCO-4618 PCI-X / PCI eSATA / SATA II / SATA I Controller Card

> >> >> > RAID

> >> >> > 0/1/5/10/JBOD

> >> >> >

> >> >> > --

> >> >> > Denise

> >> >> >

> >> >> >

> >> >>

> >> >>

> >>

> >>

>

>

Guest Denise

Guest Denise

Posted
Posted

Re: 3124_vista_x64_logo_1.1.13.0 & SiI3726 Firmware won't install

 

I've been reading some articles on the internet about installing XP Pro x64

after having Vista x64 installed. It took me 4 attempts to format my pc back

to XP Pro x64. I've downloaded new 3124 and 3726 files for the controller

card and the SATA hub several time but, each time, there is no .exe file to

install them.

 

Does anyone have an idea about something I can do so that these files will

install again? I had no problems installing them when I initially had XP Pro

x64 installed. It was only after I formatted to Vista x64 and back to XP Pro

x64 when this problem arose.

--

Denise

 

 

 

 

"Denise" wrote:

> According to the manufacturer of a SATA hub that I purchased, I need both.

> 3124 is for the controller card and 3726 is for the hub. The hub wouldn't

> turn on so I returned it to the manufacturer for a replacement so I can't say

> how a working replacement will work with 3726 installed.

> --

> Denise

>

> ~ If you don''t know where you came from, you won''t know where you''re going.

>

>

> "andy" wrote:

>

> > On Tue, 1 Jul 2008 15:29:00 -0700, Denise

> > <Denise@discussions.microsoft.com> wrote:

> >

> > >I'm having a lot of problems installing Vista x64 software/firmware. Vista

> > >x64 installed with no problems.

> > >

> > >I need to install 3124_vista_x64_logo_1.1.13.0 and SiI3726 Firmware and

> > >Firmware Update Utility for the NORCO-4618 Controller Card.

> >

> > The NORCO-4618 uses the Silicon Image SiI3124-2 chip

> > (http://www.siliconimage.com/support/supportsearchresults.aspx?pid=27&cid=15&ctid=2&osid=0&),

> > not the SiI3726.

> >

> > >

> > >I'm able to install only about 1/4 of the programs that I use. Does anyone

> > >have an idea why I can't install Vista x64 programs:

> > >

> > >This is a list of my pc components:

> > >

> > >- ASUS A8V-VM SE Socket 939 Micro ATX Motherboard - UDMA133, SATA (RAID)

> > >. . . . VIA K8M890 + VT8237A

> > >. . . . 2000/1600 HT/s

> > >. . . . Dual-channel DDR400, Max 2GB

> > >. . . . VIA Integrated Gfx in North Bridge K8M890

> > >. . . . 1 x PCI-E X16, 1 X PCI-E X 1, 2X PCI

> > >. . . . 2 *ATA133 ,2 x SATA

> > >. . . . 10/100 LAN

> > >. . . . 6-Channel audio

> > >- Seagate Barracuda 7200.10 SATA 3.0 Gb/s 320Gb hard drive (RAID array not

> > >set up)

> > >- AMD Athlon Gforce 8400 64 X2 4200+ Toledo 2.2GHz 2 x 512KB L2 Cache Socket

> > >939 Processor

> > >- ARCTIC COOLING Freezer 64 Pro 92mm CPU Cooler

> > >- Corsair 620W PSU

> > >- Ballistix 2x1G RAM, 184-pin DIMM, 128MX64 DDR PC3200, Unbuffered

> > >- NORCO-4618 PCI-X / PCI eSATA / SATA II / SATA I Controller Card RAID

> > >0/1/5/10/JBOD

> >

> >

Guest Colin Barnhorst

Guest Colin Barnhorst

Posted
Posted

Re: 3124_vista_x64_logo_1.1.13.0 & SiI3726 Firmware won't install

 

"Denise" <Denise@discussions.microsoft.com> wrote in message

news:046714E8-6B05-4A16-946E-B09B2E94F6FB@microsoft.com...

> I've been reading some articles on the internet about installing XP Pro

> x64

> after having Vista x64 installed. It took me 4 attempts to format my pc

> back

> to XP Pro x64. I've downloaded new 3124 and 3726 files for the controller

> card and the SATA hub several time but, each time, there is no .exe file

> to

> install them.

>

> Does anyone have an idea about something I can do so that these files will

> install again? I had no problems installing them when I initially had XP

> Pro

> x64 installed. It was only after I formatted to Vista x64 and back to XP

> Pro

> x64 when this problem arose.

> --

> Denise

>

>

>

>

> "Denise" wrote:

>

>> According to the manufacturer of a SATA hub that I purchased, I need

>> both.

>> 3124 is for the controller card and 3726 is for the hub. The hub

>> wouldn't

>> turn on so I returned it to the manufacturer for a replacement so I can't

>> say

>> how a working replacement will work with 3726 installed.

>> --

>> Denise

>>

>> ~ If you don''t know where you came from, you won''t know where you''re

>> going.

>>

>>

>> "andy" wrote:

>>

>> > On Tue, 1 Jul 2008 15:29:00 -0700, Denise

>> > <Denise@discussions.microsoft.com> wrote:

>> >

>> > >I'm having a lot of problems installing Vista x64 software/firmware.

>> > >Vista

>> > >x64 installed with no problems.

>> > >

>> > >I need to install 3124_vista_x64_logo_1.1.13.0 and SiI3726 Firmware

>> > >and

>> > >Firmware Update Utility for the NORCO-4618 Controller Card.

>> >

>> > The NORCO-4618 uses the Silicon Image SiI3124-2 chip

>> > (http://www.siliconimage.com/support/supportsearchresults.aspx?pid=27&cid=15&ctid=2&osid=0&),

>> > not the SiI3726.

>> >

>> > >

>> > >I'm able to install only about 1/4 of the programs that I use. Does

>> > >anyone

>> > >have an idea why I can't install Vista x64 programs:

>> > >

>> > >This is a list of my pc components:

>> > >

>> > >- ASUS A8V-VM SE Socket 939 Micro ATX Motherboard - UDMA133, SATA

>> > >(RAID)

>> > >. . . . VIA K8M890 + VT8237A

>> > >. . . . 2000/1600 HT/s

>> > >. . . . Dual-channel DDR400, Max 2GB

>> > >. . . . VIA Integrated Gfx in North Bridge K8M890

>> > >. . . . 1 x PCI-E X16, 1 X PCI-E X 1, 2X PCI

>> > >. . . . 2 *ATA133 ,2 x SATA

>> > >. . . . 10/100 LAN

>> > >. . . . 6-Channel audio

>> > >- Seagate Barracuda 7200.10 SATA 3.0 Gb/s 320Gb hard drive (RAID array

>> > >not

>> > >set up)

>> > >- AMD Athlon Gforce 8400 64 X2 4200+ Toledo 2.2GHz 2 x 512KB L2 Cache

>> > >Socket

>> > >939 Processor

>> > >- ARCTIC COOLING Freezer 64 Pro 92mm CPU Cooler

>> > >- Corsair 620W PSU

>> > >- Ballistix 2x1G RAM, 184-pin DIMM, 128MX64 DDR PC3200, Unbuffered

>> > >- NORCO-4618 PCI-X / PCI eSATA / SATA II / SATA I Controller Card RAID

>> > >0/1/5/10/JBOD

>> >

>> >

 

The standard recommendation is to delete the partition and create a new one

and not just reformat. Another possible issue (I can't tell if it applies

to your situation) is that if a SATA optical drive is in play, to set it in

the BIOS to IDE mode.

Guest Jeff Gaines

Guest Jeff Gaines

Posted
Posted

Re: 3124_vista_x64_logo_1.1.13.0 & SiI3726 Firmware won't install

 

On 05/07/2008 in message

<046714E8-6B05-4A16-946E-B09B2E94F6FB@microsoft.com> Denise wrote:

>I've been reading some articles on the internet about installing XP Pro x64

>after having Vista x64 installed. It took me 4 attempts to format my pc

>back

>to XP Pro x64. I've downloaded new 3124 and 3726 files for the controller

>card and the SATA hub several time but, each time, there is no .exe file to

>install them.

>

>Does anyone have an idea about something I can do so that these files will

>install again? I had no problems installing them when I initially had XP

>Pro

>x64 installed. It was only after I formatted to Vista x64 and back to XP

>Pro

>x64 when this problem arose.

 

What type of files are they, e.g. zip, inf etc?

 

If you end up with an inf file you need to "steer" Windows to it:

 

Control Panel -> System -> Hardware Tab ->Device Manager button, select

the device from the list, double click it, Driver Tab -> Update Drive

Button, don't connect to the Internet -> Next, Install From Specific

Location -> Next, browse to the inf file.

 

There really ought to be a more straightforward way, theoretically you can

right click on an inf file and select 'Install' from the menu but it's

never worked for me.

 

--

Jeff Gaines Damerham Hampshire UK

There is no reason anyone would want a computer in their home.

(Ken Olson, president Digital Equipment, 1977)

Guest Denise

Guest Denise

Posted
Posted

Re: 3124_vista_x64_logo_1.1.13.0 & SiI3726 Firmware won't install

 

Surprisingly, te device isn't on the list in Device Manager but it is on the

list of Hardware. When I tried to install the controller card from Hardware,

it said that I don't have the drivers installed for it. I've installed:

 

1. 3124 x86 13200_logo driver

2. 3132 x86 bios 7223

3. SATA Controller Card 3124 x64 1.1.130 logo

4. SiI3114 64-bit Windows SATARAID5 Driver

5. SiI 3124 x64 15110 logo driver

 

 

Before I formatted to Vista x64, I installed:

 

1. SATA Controller Card 3124 x64 1.1.130 logo

2. SiI 3124 64-bit Windows SATARAID5 Driver

 

and it worked.

 

It shouldn't need anything else to work. I don't know what else I can do.

 

After the drivers were installed, I opened some of the folders and the

device that the files need to open are VLC Media Player which, of course, is

completely wrong.

 

 

Any ideas?

 

--

Denise

 

 

 

 

"Jeff Gaines" wrote:

> On 05/07/2008 in message

> <046714E8-6B05-4A16-946E-B09B2E94F6FB@microsoft.com> Denise wrote:

>

> >I've been reading some articles on the internet about installing XP Pro x64

> >after having Vista x64 installed. It took me 4 attempts to format my pc

> >back

> >to XP Pro x64. I've downloaded new 3124 and 3726 files for the controller

> >card and the SATA hub several time but, each time, there is no .exe file to

> >install them.

> >

> >Does anyone have an idea about something I can do so that these files will

> >install again? I had no problems installing them when I initially had XP

> >Pro

> >x64 installed. It was only after I formatted to Vista x64 and back to XP

> >Pro

> >x64 when this problem arose.

>

> What type of files are they, e.g. zip, inf etc?

>

> If you end up with an inf file you need to "steer" Windows to it:

>

> Control Panel -> System -> Hardware Tab ->Device Manager button, select

> the device from the list, double click it, Driver Tab -> Update Drive

> Button, don't connect to the Internet -> Next, Install From Specific

> Location -> Next, browse to the inf file.

>

> There really ought to be a more straightforward way, theoretically you can

> right click on an inf file and select 'Install' from the menu but it's

> never worked for me.

>

> --

> Jeff Gaines Damerham Hampshire UK

> There is no reason anyone would want a computer in their home.

> (Ken Olson, president Digital Equipment, 1977)

>

Guest Denise

Guest Denise

Posted
Posted

Re: 3124_vista_x64_logo_1.1.13.0 & SiI3726 Firmware won't install

 

I was getting tired of trying different drivers in different combinations but

I went into Device Manager one more time to see what was going on, but

nothing changed. But I decided to make Windows happy and give it a shot at

finding a driver for my Maxtor One Touch II ext hhd's, they're firewired.

They don't come with drivers, only Retropect, which is a back-up program.

Well, it started to download files and I figured it would good to finally get

rid of those yellow question marks for those hdds. Then all of a sudden, SCSI

and RAID controllers was there in Device Manager and my 4 SATA ext hdds are

recognized in My Computer!?!! I'm not even going to question it.

--

Denise

 

 

 

 

"Denise" wrote:

> Surprisingly, the device isn't on the list in Device Manager but it is on the

> list of Hardware. When I tried to install the controller card from Hardware,

> it said that I don't have the drivers installed for it. I've installed:

>

> 1. 3124 x86 13200_logo driver

> 2. 3132 x86 bios 7223

> 3. SATA Controller Card 3124 x64 1.1.130 logo

> 4. SiI3114 64-bit Windows SATARAID5 Driver

> 5. SiI 3124 x64 15110 logo driver

>

>

> Before I formatted to Vista x64, I installed:

>

> 1. SATA Controller Card 3124 x64 1.1.130 logo

> 2. SiI 3124 64-bit Windows SATARAID5 Driver

>

> and it worked.

>

> It shouldn't need anything else to work. I don't know what else I can do.

>

> After the drivers were installed, I opened some of the folders and the

> device that the files need to open are VLC Media Player which, of course, is

> completely wrong.

>

>

> Any ideas?

>

> --

> Denise

>

>

>

>

> "Jeff Gaines" wrote:

>

> > On 05/07/2008 in message

> > <046714E8-6B05-4A16-946E-B09B2E94F6FB@microsoft.com> Denise wrote:

> >

> > >I've been reading some articles on the internet about installing XP Pro x64

> > >after having Vista x64 installed. It took me 4 attempts to format my pc

> > >back

> > >to XP Pro x64. I've downloaded new 3124 and 3726 files for the controller

> > >card and the SATA hub several time but, each time, there is no .exe file to

> > >install them.

> > >

> > >Does anyone have an idea about something I can do so that these files will

> > >install again? I had no problems installing them when I initially had XP

> > >Pro

> > >x64 installed. It was only after I formatted to Vista x64 and back to XP

> > >Pro

> > >x64 when this problem arose.

> >

> > What type of files are they, e.g. zip, inf etc?

> >

> > If you end up with an inf file you need to "steer" Windows to it:

> >

> > Control Panel -> System -> Hardware Tab ->Device Manager button, select

> > the device from the list, double click it, Driver Tab -> Update Drive

> > Button, don't connect to the Internet -> Next, Install From Specific

> > Location -> Next, browse to the inf file.

> >

> > There really ought to be a more straightforward way, theoretically you can

> > right click on an inf file and select 'Install' from the menu but it's

> > never worked for me.

> >

> > --

> > Jeff Gaines Damerham Hampshire UK

> > There is no reason anyone would want a computer in their home.

> > (Ken Olson, president Digital Equipment, 1977)

> >

Guest Tom Ferguson

Guest Tom Ferguson

Posted
Posted

Re: 3124_vista_x64_logo_1.1.13.0 & SiI3726 Firmware won't install

 

Good!

 Share
Go to topic listing
×
×
  • Create New...