Wireless PCI adapter for Windows 2000

[Guest void.no.spam.com@gmail.com]

I am looking for a wireless PCI adapter that supports WPA on Windows

2000. Since Windows 2000 does not have the Wireless Zero

Configuration service like XP does, then the wireless PCI adapter

needs to come with its own utility that lets you use WPA.

 

I also would like the adapter's software to run as a Windows service

(as opposed to running only when a user logs in) - that way the system

can respond to pings or share requests if no one is logged in. The

software should also allow limited user accounts to use the wireless

connection.

 

Any recommendations?

[Guest Philip Herlihy]

Re: Wireless PCI adapter for Windows 2000

 

void.no.spam.com@gmail.com wrote:

> I am looking for a wireless PCI adapter that supports WPA on Windows

> 2000. Since Windows 2000 does not have the Wireless Zero

> Configuration service like XP does, then the wireless PCI adapter

> needs to come with its own utility that lets you use WPA.

>

> I also would like the adapter's software to run as a Windows service

> (as opposed to running only when a user logs in) - that way the system

> can respond to pings or share requests if no one is logged in. The

> software should also allow limited user accounts to use the wireless

> connection.

>

> Any recommendations?

 

My experience of using PCI adapters is that they only connect when

logged on. Instead, I use an external "bridge" device which connects to

the PC using Ethernet. Many Wireless Access Points will operate in this

mode (I've used ones from US Robotics and Netgear), as well as devices

designed solely for this function. Of course, if you're going to use an

Ethernet connected device, you might consider HomePlug/Powerline.

 

Phil, London

[Guest Aaron Leonard]

Re: Wireless PCI adapter for Windows 2000

 

 

~ I am looking for a wireless PCI adapter that supports WPA on Windows

~ 2000. Since Windows 2000 does not have the Wireless Zero

~ Configuration service like XP does, then the wireless PCI adapter

~ needs to come with its own utility that lets you use WPA.

~

~ I also would like the adapter's software to run as a Windows service

~ (as opposed to running only when a user logs in) - that way the system

~ can respond to pings or share requests if no one is logged in. The

~ software should also allow limited user accounts to use the wireless

~ connection.

~

~ Any recommendations?

 

I believe that the Cisco PI21AG will meet all of the stated requirements.

 

Aaron

[Guest void.no.spam.com@gmail.com]

Re: Wireless PCI adapter for Windows 2000

 

On Jul 7, 12:56 pm, Aaron Leonard <Aa...@Cisco.COM> wrote:

> ~ I am looking for a wireless PCI adapter that supports WPA on Windows

> ~ 2000.  Since Windows 2000 does not have the Wireless Zero

> ~ Configuration service like XP does, then the wireless PCI adapter

> ~ needs to come with its own utility that lets you use WPA.

> ~

> ~ I also would like the adapter's software to run as a Windows service

> ~ (as opposed to running only when a user logs in) - that way the system

> ~ can respond to pings or share requests if no one is logged in.  The

> ~ software should also allow limited user accounts to use the wireless

> ~ connection.

> ~

> ~ Any recommendations?

>

> I believe that the Cisco PI21AG will meet all of the stated requirements.

 

Do you know if I can use WPA-PSK with the Cisco adapter? There is

this FAQ at cisco.com:

 

http://www.cisco.com/en/US/products/hw/wireless/ps4555/products_qanda_item09186a0080094cdc.shtml

 

"Q. Can I configure Wi-Fi Protected Access-Pre-Shared Key (WPA-PSK)

with the help of the Aironet Client Utility (ACU)?

 

A. WPA provides a PSK version that is intended for use in small

office, home office (SOHO) or home wireless networks. Cisco ACU does

not support WPA-PSK. The Wireless Zero Configuration utility from

Microsoft Windows supports WPA-PSK for most wireless cards."

 

 

So either the adapter doesn't support WPA-PSK, or that FAQ is

referring to an older adapter.

 

Another thing I forgot to mention is that my computer has PCI 2.1

slots. The only thing I can find about the PI21AG is that it is "PCI

Rev. 2.3 compliant". Any idea if it works with PCI 2.1?

[Guest Bill Kearney]

Re: Wireless PCI adapter for Windows 2000

 

> Any recommendations?

 

Get one of the wired ethernet adapters instead. That way nothing has to

change on the w2k box. It can use it's plain old ethernet driver and not

have to worry about any other driver or utility software.

 

-Bill Kearney

[Guest Aaron Leonard]

Re: Wireless PCI adapter for Windows 2000

 

On Mon, 7 Jul 2008 10:42:44 -0700 (PDT), "void.no.spam.com@gmail.com" <void.no.spam.com@gmail.com> wrote:

 

~ On Jul 7, 12:56 pm, Aaron Leonard <Aa...@Cisco.COM> wrote:

~ > ~ I am looking for a wireless PCI adapter that supports WPA on Windows

~ > ~ 2000.  Since Windows 2000 does not have the Wireless Zero

~ > ~ Configuration service like XP does, then the wireless PCI adapter

~ > ~ needs to come with its own utility that lets you use WPA.

~ > ~

~ > ~ I also would like the adapter's software to run as a Windows service

~ > ~ (as opposed to running only when a user logs in) - that way the system

~ > ~ can respond to pings or share requests if no one is logged in.  The

~ > ~ software should also allow limited user accounts to use the wireless

~ > ~ connection.

~ > ~

~ > ~ Any recommendations?

~ >

~ > I believe that the Cisco PI21AG will meet all of the stated requirements.

~

~ Do you know if I can use WPA-PSK with the Cisco adapter? There is

~ this FAQ at cisco.com:

~

~ http://www.cisco.com/en/US/products/hw/wireless/ps4555/products_qanda_item09186a0080094cdc.shtml

~

~ "Q. Can I configure Wi-Fi Protected Access-Pre-Shared Key (WPA-PSK)

~ with the help of the Aironet Client Utility (ACU)?

~

~ A. WPA provides a PSK version that is intended for use in small

~ office, home office (SOHO) or home wireless networks. Cisco ACU does

~ not support WPA-PSK. The Wireless Zero Configuration utility from

~ Microsoft Windows supports WPA-PSK for most wireless cards."

 

~ So either the adapter doesn't support WPA-PSK, or that FAQ is

~ referring to an older adapter.

 

The latter case applies. ACU is the client utility for our older

350 series adapters. The client utility for our current CB21AG/PI21AG

adapters is called ADU, and it does support PSK. See a configuration

example here:

 

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008054339e.shtml#config_ca2

 

~ Another thing I forgot to mention is that my computer has PCI 2.1

~ slots. The only thing I can find about the PI21AG is that it is "PCI

~ Rev. 2.3 compliant". Any idea if it works with PCI 2.1?

 

Oops. The PI21AG does require PCI 2.3 and is not supported (and probably will

not work) with PCI 2.1.

 

Could you use a wireless bridge, such as a Linksys WET54G?

 

Aaron

[Guest void.no.spam.com@gmail.com]

Re: Wireless PCI adapter for Windows 2000

 

Aaron Leonard wrote:

>On Mon, 7 Jul 2008 10:42:44 -0700 (PDT), "void.no.spam.com@gmail.com"

><void.no.spam.com@gmail.com> wrote:

>

>~ On Jul 7, 12:56 pm, Aaron Leonard <Aa...@Cisco.COM> wrote:

>~ > ~ I am looking for a wireless PCI adapter that supports WPA on Windows

>~ > ~ 2000.  Since Windows 2000 does not have the Wireless Zero

>~ > ~ Configuration service like XP does, then the wireless PCI adapter

>~ > ~ needs to come with its own utility that lets you use WPA.

>~ > ~

>~ > ~ I also would like the adapter's software to run as a Windows service

>~ > ~ (as opposed to running only when a user logs in) - that way the

>system

>~ > ~ can respond to pings or share requests if no one is logged in.  The

>~ > ~ software should also allow limited user accounts to use the wireless

>~ > ~ connection.

>~ > ~

>~ > ~ Any recommendations?

>~ >

>~ > I believe that the Cisco PI21AG will meet all of the stated

>requirements.

>~

>~ Do you know if I can use WPA-PSK with the Cisco adapter? There is

>~ this FAQ at cisco.com:

>~

>~

>http://www.cisco.com/en/US/products/hw/wireless/ps4555/products_qanda_item09186a0080094cdc.shtml

>~

>~ "Q. Can I configure Wi-Fi Protected Access-Pre-Shared Key (WPA-PSK)

>~ with the help of the Aironet Client Utility (ACU)?

>~

>~ A. WPA provides a PSK version that is intended for use in small

>~ office, home office (SOHO) or home wireless networks. Cisco ACU does

>~ not support WPA-PSK. The Wireless Zero Configuration utility from

>~ Microsoft Windows supports WPA-PSK for most wireless cards."

>

>~ So either the adapter doesn't support WPA-PSK, or that FAQ is

>~ referring to an older adapter.

>

>The latter case applies. ACU is the client utility for our older

>350 series adapters. The client utility for our current CB21AG/PI21AG

>adapters is called ADU, and it does support PSK. See a configuration

>example here:

>

>http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008054339e.shtml#config_ca2

 

That is good to know.

 

>~ Another thing I forgot to mention is that my computer has PCI 2.1

>~ slots. The only thing I can find about the PI21AG is that it is "PCI

>~ Rev. 2.3 compliant". Any idea if it works with PCI 2.1?

>

>Oops. The PI21AG does require PCI 2.3 and is not supported (and probably

>will

>not work) with PCI 2.1.

 

I used the Cisco Chat feature on your web site and spoke with a sales rep.

I asked him, and he said it is backwards compatible with PCI 2.1, but that it would run at a slightly slower bus speed.

 

>Could you use a wireless bridge, such as a Linksys WET54G?

 

I will look into that.

[Guest Aaron Leonard]

Re: Wireless PCI adapter for Windows 2000

 

 

 

~ >~ Another thing I forgot to mention is that my computer has PCI 2.1

~ >~ slots. The only thing I can find about the PI21AG is that it is "PCI

~ >~ Rev. 2.3 compliant". Any idea if it works with PCI 2.1?

~ >

~ >Oops. The PI21AG does require PCI 2.3 and is not supported (and probably

~ >will

~ >not work) with PCI 2.1.

~

~ I used the Cisco Chat feature on your web site and spoke with a sales rep.

~ I asked him, and he said it is backwards compatible with PCI 2.1, but that it would run at a slightly slower bus speed.

 

A sales rep would say that, wouldn't he? :^)

 

I know for a fact that some customers have tried unsuccessfully to use the PI21AG with

computers that have a PCI 2.1 bus. That said, I guess you could give it a go with

your particular systems and see if it works, and get a refund if not.

 

Cheers,

 

Aaron

 

----

 

 

~ >Could you use a wireless bridge, such as a Linksys WET54G?

~

~ I will look into that.