Guest Paul Posted August 23, 2008 Posted August 23, 2008 Attempting to install XP x64 on a new computer I just built. I have created the RAID array using the onboard RAID controller and it is listed as 'healthy' during bootup. Windows Setup loads all the necessary files, then crashes before it can enter the installation screen. I get a BSOD with the following error "STOP: 0x0000007B (etc), (etc),(etc)" I understand this to be an error due to an inaccessible boot device. So, I try again this time hitting 'F6' to install third party RAID drivers. Setup tells me it will "load support for the following devices: none" I hit 'S' to specify drivers and it tells me it cannot find a floppy drive installed on my machine. I do not have a floppy drive, nor do I intend on installing one. The RAID drivers are on a CD from my motherboard manufacturer (EVGA), is there a way to install these drivers without needing to install a floppy drive? System Specs: EVGA nForce 780i motherboard Intel E8500 Processor Dual 500GB Seagate Barracuda Hard Drives Thank you for your help!! Paul
Guest Charlie Russel - MVP Posted August 23, 2008 Posted August 23, 2008 Re: Installing XP x64 on SATA RAID 0 No. You must have a floppy drive. (well, OK, you can build a custom, inline, install CD for XP x64 that has them in it. But not trivial.) Borrow a floppy. Buy one for $10 USD. Use a USB Floppy. Whatever method you want. You won't need it after the install, unless or until you have to reinstall. Then you'll need it again. You can remove it after the install completes. This problem is gone in Vista, which accepts CD, USB, or Floppy. But it is still there in XP/2003. -- Charlie. http://msmvps.com/blogs/xperts64 http://mvp.support.microsoft.com/profile/charlie.russel "Paul" <Paul@discussions.microsoft.com> wrote in message news:2DAFF6DF-1B7E-42A5-99CE-1C04FCA80DA3@microsoft.com... > Attempting to install XP x64 on a new computer I just built. I have > created > the RAID array using the onboard RAID controller and it is listed as > 'healthy' during bootup. Windows Setup loads all the necessary files, > then > crashes before it can enter the installation screen. I get a BSOD with > the > following error "STOP: 0x0000007B (etc), (etc),(etc)" I understand this > to > be an error due to an inaccessible boot device. So, I try again this time > hitting 'F6' to install third party RAID drivers. Setup tells me it will > "load support for the following devices: none" I hit 'S' to specify > drivers > and it tells me it cannot find a floppy drive installed on my machine. I > do > not have a floppy drive, nor do I intend on installing one. The RAID > drivers > are on a CD from my motherboard manufacturer (EVGA), is there a way to > install these drivers without needing to install a floppy drive? > > System Specs: > EVGA nForce 780i motherboard > Intel E8500 Processor > Dual 500GB Seagate Barracuda Hard Drives > > Thank you for your help!! > Paul
Guest Paul Posted August 23, 2008 Posted August 23, 2008 Re: Installing XP x64 on SATA RAID 0 Charlie, Thank you for the quick reply. I will locate a floppy. Thanks for your help! Paul "Charlie Russel - MVP" wrote: > No. You must have a floppy drive. (well, OK, you can build a custom, inline, > install CD for XP x64 that has them in it. But not trivial.) > > Borrow a floppy. Buy one for $10 USD. Use a USB Floppy. Whatever method you > want. You won't need it after the install, unless or until you have to > reinstall. Then you'll need it again. You can remove it after the install > completes. > > This problem is gone in Vista, which accepts CD, USB, or Floppy. But it is > still there in XP/2003. > > -- > Charlie. > http://msmvps.com/blogs/xperts64 > http://mvp.support.microsoft.com/profile/charlie.russel > > "Paul" <Paul@discussions.microsoft.com> wrote in message > news:2DAFF6DF-1B7E-42A5-99CE-1C04FCA80DA3@microsoft.com... > > Attempting to install XP x64 on a new computer I just built. I have > > created > > the RAID array using the onboard RAID controller and it is listed as > > 'healthy' during bootup. Windows Setup loads all the necessary files, > > then > > crashes before it can enter the installation screen. I get a BSOD with > > the > > following error "STOP: 0x0000007B (etc), (etc),(etc)" I understand this > > to > > be an error due to an inaccessible boot device. So, I try again this time > > hitting 'F6' to install third party RAID drivers. Setup tells me it will > > "load support for the following devices: none" I hit 'S' to specify > > drivers > > and it tells me it cannot find a floppy drive installed on my machine. I > > do > > not have a floppy drive, nor do I intend on installing one. The RAID > > drivers > > are on a CD from my motherboard manufacturer (EVGA), is there a way to > > install these drivers without needing to install a floppy drive? > > > > System Specs: > > EVGA nForce 780i motherboard > > Intel E8500 Processor > > Dual 500GB Seagate Barracuda Hard Drives > > > > Thank you for your help!! > > Paul >
Guest Carlos Posted August 23, 2008 Posted August 23, 2008 Re: Installing XP x64 on SATA RAID 0 And make sure you have downloaded the latest drivers from here: http://www.evga.com/Support/Drivers/Default.asp Carlos "Paul" wrote: > Charlie, > > Thank you for the quick reply. I will locate a floppy. Thanks for your help! > > Paul > > "Charlie Russel - MVP" wrote: > > > No. You must have a floppy drive. (well, OK, you can build a custom, inline, > > install CD for XP x64 that has them in it. But not trivial.) > > > > Borrow a floppy. Buy one for $10 USD. Use a USB Floppy. Whatever method you > > want. You won't need it after the install, unless or until you have to > > reinstall. Then you'll need it again. You can remove it after the install > > completes. > > > > This problem is gone in Vista, which accepts CD, USB, or Floppy. But it is > > still there in XP/2003. > > > > -- > > Charlie. > > http://msmvps.com/blogs/xperts64 > > http://mvp.support.microsoft.com/profile/charlie.russel > > > > "Paul" <Paul@discussions.microsoft.com> wrote in message > > news:2DAFF6DF-1B7E-42A5-99CE-1C04FCA80DA3@microsoft.com... > > > Attempting to install XP x64 on a new computer I just built. I have > > > created > > > the RAID array using the onboard RAID controller and it is listed as > > > 'healthy' during bootup. Windows Setup loads all the necessary files, > > > then > > > crashes before it can enter the installation screen. I get a BSOD with > > > the > > > following error "STOP: 0x0000007B (etc), (etc),(etc)" I understand this > > > to > > > be an error due to an inaccessible boot device. So, I try again this time > > > hitting 'F6' to install third party RAID drivers. Setup tells me it will > > > "load support for the following devices: none" I hit 'S' to specify > > > drivers > > > and it tells me it cannot find a floppy drive installed on my machine. I > > > do > > > not have a floppy drive, nor do I intend on installing one. The RAID > > > drivers > > > are on a CD from my motherboard manufacturer (EVGA), is there a way to > > > install these drivers without needing to install a floppy drive? > > > > > > System Specs: > > > EVGA nForce 780i motherboard > > > Intel E8500 Processor > > > Dual 500GB Seagate Barracuda Hard Drives > > > > > > Thank you for your help!! > > > Paul > >
Guest XS11E Posted September 17, 2008 Posted September 17, 2008 Re: Installing XP x64 on SATA RAID 0 "Charlie Russel - MVP" <charlie@mvKILLALLSPAMMERSps.org> wrote: > No. You must have a floppy drive. (well, OK, you can build a > custom, inline, install CD for XP x64 that has them in it. But not > trivial.) Not sure about the OP's motherboard but some BIOSs can be set so SATA drives are recognized as IDE drives, mine is one of them and XP installs with no problem and no need to hit F8 during install although my HDs are SATA as are my optical drives. The OP needs to do some searching in his BIOS settings. Alternatively I've heard that there may be some BIOSs that will allow a flash drive to be recognized as a floppy but I'm not sure that's true? -- XS11E, Killing all posts from Google Groups The Usenet Improvement Project: http://improve-usenet.org
Guest Charlie Russel - MVP Posted September 18, 2008 Posted September 18, 2008 Re: Installing XP x64 on SATA RAID 0 There are some that will allow SATA as IDE. But none that I'm aware of that will allow SATA RAID0 as IDE. ;-) I would be surprised if the USB as floppy thing worked for this. Knowing at what a low level this whole thing actually works. (The old NT boot code is some of the most basic code in Windows, I'm told. ) -- Charlie. http://msmvps.com/blogs/xperts64 http://mvp.support.microsoft.com/profile/charlie.russel "XS11E" <xs11e@NOSPAMyahoo.com> wrote in message news:Xns9B1CA75BD5EFAxs11eyahoocom@127.0.0.1... > "Charlie Russel - MVP" <charlie@mvKILLALLSPAMMERSps.org> wrote: > >> No. You must have a floppy drive. (well, OK, you can build a >> custom, inline, install CD for XP x64 that has them in it. But not >> trivial.) > > Not sure about the OP's motherboard but some BIOSs can be set so SATA > drives are recognized as IDE drives, mine is one of them and XP > installs with no problem and no need to hit F8 during install although > my HDs are SATA as are my optical drives. The OP needs to do some > searching in his BIOS settings. > > Alternatively I've heard that there may be some BIOSs that will allow a > flash drive to be recognized as a floppy but I'm not sure that's true? > > > -- > XS11E, Killing all posts from Google Groups > The Usenet Improvement Project: > http://improve-usenet.org
Recommended Posts