DL360 G3 server boots after 30 minutes

[Guest Tony Davis]

I have performed various boot scenarios to locate the slow boot time. I have

found out that if I have USB enabled in the BIOS, then i must have a USB

device plugged in to my server for it to boot normally. If I unplug the

device and reboot(multiple times) it hangs after the splash screen with the

animated progress bar. If I leave USB enabled, boot into safe mode, it hangs

at acpitabl.dat....

 

Now get this.. If I disable USB in the BIOS, then it boots up fine. NO

hangs at all. Only problem is, I can't use any USB devices.

 

Also, while windows is running, if I unplug the USB device, I get an unknown

USB device error, which leads me to believe my USB system drivers are flaky.

 

So your'e going to tell me to leave a USB device plugged in at all times.

Well, that's sounds like a feasable solution, but it shouldn't be that way.

USB ports shouldn't be searching for devices during startup.

 

How can I get a normal boot with USB enabled in the BIOS and no USB devices

connected to my server?

[Guest Charlie Russel - MVP]

Re: DL360 G3 server boots after 30 minutes

 

Talk to HP. There have been numerous updates for this BIOS, hopefully one of

them will resolve it. I have the G5 version of this box and have no such

issues.

 

--

Charlie.

http://msmvps.com/xperts64

http://mvp.support.microsoft.com/profile/charlie.russel

 

 

"Tony Davis" <Tony Davis@discussions.microsoft.com> wrote in message

news:32E7591B-2812-4459-93A2-6777B46B5274@microsoft.com...

>I have performed various boot scenarios to locate the slow boot time. I

>have

> found out that if I have USB enabled in the BIOS, then i must have a USB

> device plugged in to my server for it to boot normally. If I unplug the

> device and reboot(multiple times) it hangs after the splash screen with

> the

> animated progress bar. If I leave USB enabled, boot into safe mode, it

> hangs

> at acpitabl.dat....

>

> Now get this.. If I disable USB in the BIOS, then it boots up fine. NO

> hangs at all. Only problem is, I can't use any USB devices.

>

> Also, while windows is running, if I unplug the USB device, I get an

> unknown

> USB device error, which leads me to believe my USB system drivers are

> flaky.

>

> So your'e going to tell me to leave a USB device plugged in at all times.

> Well, that's sounds like a feasable solution, but it shouldn't be that

> way.

> USB ports shouldn't be searching for devices during startup.

>

> How can I get a normal boot with USB enabled in the BIOS and no USB

> devices

> connected to my server?

[Guest Tony Sperling]

Re: DL360 G3 server boots after 30 minutes

 

If you didn't try it, I think you should go look for a possible BIOS

update - first, you might try finding the 'USB Legacy Support' setting in

BIOS Setup and switch it to whatever it is NOT set to at the moment.

 

Tony. . .

 

 

"Tony Davis" <Tony Davis@discussions.microsoft.com> wrote in message

news:32E7591B-2812-4459-93A2-6777B46B5274@microsoft.com...

> I have performed various boot scenarios to locate the slow boot time. I

have

> found out that if I have USB enabled in the BIOS, then i must have a USB

> device plugged in to my server for it to boot normally. If I unplug the

> device and reboot(multiple times) it hangs after the splash screen with

the

> animated progress bar. If I leave USB enabled, boot into safe mode, it

hangs

> at acpitabl.dat....

>

> Now get this.. If I disable USB in the BIOS, then it boots up fine. NO

> hangs at all. Only problem is, I can't use any USB devices.

>

> Also, while windows is running, if I unplug the USB device, I get an

unknown

> USB device error, which leads me to believe my USB system drivers are

flaky.

>

> So your'e going to tell me to leave a USB device plugged in at all times.

> Well, that's sounds like a feasable solution, but it shouldn't be that

way.

> USB ports shouldn't be searching for devices during startup.

>

> How can I get a normal boot with USB enabled in the BIOS and no USB

devices

> connected to my server?

[Guest Tony Davis]

RE: DL360 G3 server boots after 30 minutes

 

I have updated the bios to the most current version... P31 4.12A 3/3/2005

 

What's weird is that after the splash screen, if the USB mouse is unplugged,

I can see activity on the HD lights. If I plug in the mouse, the logon

screen pops right up. If I leave it unplugged, it literally takes 30 minutes

for Windows to decide that there are no USB devices. HP is no help. They

told me to update my BIOS, well it is updated.

 

Oh well, I thought out there some where, someone had the same problem as me

and had a fix.

 

Thanks,

Tony