file is missing or corrupt: ntoskrnl.exe

[Guest Op]

I get the error message at boot. I am setting a new computer.

 

I have one HD which has Windows 98 on C: (FAT) and WINNT (NTFS)installed on D:

 

Windows 98 boots fine. Windows 2000 used to boot fine too. After having

installing Windows 2000 fine (it booted, worked fine) I downloaded Service Pack 4

from microsoft. I haven't installed any other program.

 

It installed fine. After rebooting I get the error. Emergency console see the

directory WINNT fine and NTOSKRNL.EXE is there OK.

 

What should I have in my BOOT.INI? I sure the files are fine (not missing or

corrupt) but somehow Boot won't just see D: even though emergency repair does.

 

The computer I am working has worked fine for years. I started the installation

process just the start from scratch an do a clean reinstall.

[Guest John John]

Re: file is missing or corrupt: ntoskrnl.exe

 

Post the contents of the boot.ini file here and someone will go over it

with you and suggest possible changes or additions.

 

John

 

Op wrote:

> I get the error message at boot. I am setting a new computer.

>

> I have one HD which has Windows 98 on C: (FAT) and WINNT (NTFS)installed on D:

>

> Windows 98 boots fine. Windows 2000 used to boot fine too. After having

> installing Windows 2000 fine (it booted, worked fine) I downloaded Service Pack 4

> from microsoft. I haven't installed any other program.

>

> It installed fine. After rebooting I get the error. Emergency console see the

> directory WINNT fine and NTOSKRNL.EXE is there OK.

>

> What should I have in my BOOT.INI? I sure the files are fine (not missing or

> corrupt) but somehow Boot won't just see D: even though emergency repair does.

>

> The computer I am working has worked fine for years. I started the installation

> process just the start from scratch an do a clean reinstall.

[Guest Op]

Re: file is missing or corrupt: ntoskrnl.exe

 

John John <audetweld@nbnet.nb.ca> wrote:

>Post the contents of the boot.ini file here and someone will go over it

>with you and suggest possible changes or additions.

>

>John

>

>Op wrote:

>

>> I get the error message at boot. I am setting a new computer.

>>

>> I have one HD which has Windows 98 on C: (FAT) and WINNT (NTFS)installed on D:

>>

>> Windows 98 boots fine. Windows 2000 used to boot fine too. After having

>> installing Windows 2000 fine (it booted, worked fine) I downloaded Service Pack 4

>> from microsoft. I haven't installed any other program.

>>

>> It installed fine. After rebooting I get the error. Emergency console see the

>> directory WINNT fine and NTOSKRNL.EXE is there OK.

>>

>> What should I have in my BOOT.INI? I sure the files are fine (not missing or

>> corrupt) but somehow Boot won't just see D: even though emergency repair does.

>>

>> The computer I am working has worked fine for years. I started the installation

>> process just the start from scratch an do a clean reinstall.

 

 

I decided to install Win2000 again. Now the installation process goes as far as

"Saving settings" (the final page of installation process) and blue screens with

"IRQL_NOT_LESS_OR_EQUAL" blah blah blah "ntoskrnl.exe"

 

I've tried it like five or six times and same thing everytime. :(

[Guest Pegasus \(MVP\)]

Re: file is missing or corrupt: ntoskrnl.exe

 

 

"Op" <1@invalid.com> wrote in message

news:nqk9g39om77fopdktgm863h8copn6uguri@4ax.com...

> John John <audetweld@nbnet.nb.ca> wrote:

>

>>Post the contents of the boot.ini file here and someone will go over it

>>with you and suggest possible changes or additions.

>>

>>John

>>

>>Op wrote:

>>

>>> I get the error message at boot. I am setting a new computer.

>>>

>>> I have one HD which has Windows 98 on C: (FAT) and WINNT (NTFS)installed

>>> on D:

>>>

>>> Windows 98 boots fine. Windows 2000 used to boot fine too. After having

>>> installing Windows 2000 fine (it booted, worked fine) I downloaded

>>> Service Pack 4

>>> from microsoft. I haven't installed any other program.

>>>

>>> It installed fine. After rebooting I get the error. Emergency console

>>> see the

>>> directory WINNT fine and NTOSKRNL.EXE is there OK.

>>>

>>> What should I have in my BOOT.INI? I sure the files are fine (not

>>> missing or

>>> corrupt) but somehow Boot won't just see D: even though emergency repair

>>> does.

>>>

>>> The computer I am working has worked fine for years. I started the

>>> installation

>>> process just the start from scratch an do a clean reinstall.

>

>

> I decided to install Win2000 again. Now the installation process goes as

> far as

> "Saving settings" (the final page of installation process) and blue

> screens with

> "IRQL_NOT_LESS_OR_EQUAL" blah blah blah "ntoskrnl.exe"

>

> I've tried it like five or six times and same thing everytime. :(

 

Please describe exactly how you are re-installing Windows.

[Guest John John]

Re: file is missing or corrupt: ntoskrnl.exe

 

Op wrote:

> John John <audetweld@nbnet.nb.ca> wrote:

>

>

>>Post the contents of the boot.ini file here and someone will go over it

>>with you and suggest possible changes or additions.

>>

>>John

>>

>>Op wrote:

>>

>>

>>>I get the error message at boot. I am setting a new computer.

>>>

>>>I have one HD which has Windows 98 on C: (FAT) and WINNT (NTFS)installed on D:

>>>

>>>Windows 98 boots fine. Windows 2000 used to boot fine too. After having

>>>installing Windows 2000 fine (it booted, worked fine) I downloaded Service Pack 4

>>>from microsoft. I haven't installed any other program.

>>>

>>>It installed fine. After rebooting I get the error. Emergency console see the

>>>directory WINNT fine and NTOSKRNL.EXE is there OK.

>>>

>>>What should I have in my BOOT.INI? I sure the files are fine (not missing or

>>>corrupt) but somehow Boot won't just see D: even though emergency repair does.

>>>

>>>The computer I am working has worked fine for years. I started the installation

>>>process just the start from scratch an do a clean reinstall.

>

>

>

> I decided to install Win2000 again. Now the installation process goes as far as

> "Saving settings" (the final page of installation process) and blue screens with

> "IRQL_NOT_LESS_OR_EQUAL" blah blah blah "ntoskrnl.exe"

>

> I've tried it like five or six times and same thing everytime. :(

 

Did you disconnect all unnecessary external hardware before you

reinstalled? When you install an operating system the only external

hardware that should be attached to the computer are the monitor,

keyboard and mouse.

 

John

 

PS: That blah blah blah stuff are important parameters in the bugcheck

error message. It may help someone find an answer to the problem if

they know the 4 parameters.

[Guest Op]

Re: file is missing or corrupt: ntoskrnl.exe

 

John John <audetweld@nbnet.nb.ca> wrote:

>> I decided to install Win2000 again. Now the installation process goes as far as

>> "Saving settings" (the final page of installation process) and blue screens with

>> "IRQL_NOT_LESS_OR_EQUAL" blah blah blah "ntoskrnl.exe"

>>

>> I've tried it like five or six times and same thing everytime. :(

>

>Did you disconnect all unnecessary external hardware before you

>reinstalled? When you install an operating system the only external

>hardware that should be attached to the computer are the monitor,

>keyboard and mouse.

>

>John

>

>PS: That blah blah blah stuff are important parameters in the bugcheck

>error message. It may help someone find an answer to the problem if

>they know the 4 parameters.

 

I managed to get Win2000 installed after numerous attempts but I believe some

files were not installed properly. Now when I do something Windows generates some

sort of error. For example if I bring up "control panel" I get a script error. I

also get "Explorer has generated errors and will be closed ...".

 

I tried doing an emergency repair procedure from the Win2000 installation CD. It

dis it's job but I don't think it copied anything to the HD. It only seemed to

check the HD and not copy any files.

 

I can get to Internet but most pages including upgrade pages pop up a script

error.

 

Could I just copy the contents of SYSTEM32 from another computer to this computer

if the problem is that a dll is bad or corrupt? My installation CD says it has

service pack 1.

[Guest John John]

Re: file is missing or corrupt: ntoskrnl.exe

 

Op wrote:

> John John <audetweld@nbnet.nb.ca> wrote:

>

>

>>>I decided to install Win2000 again. Now the installation process goes as far as

>>>"Saving settings" (the final page of installation process) and blue screens with

>>>"IRQL_NOT_LESS_OR_EQUAL" blah blah blah "ntoskrnl.exe"

>>>

>>>I've tried it like five or six times and same thing everytime. :(

>>

>>Did you disconnect all unnecessary external hardware before you

>>reinstalled? When you install an operating system the only external

>>hardware that should be attached to the computer are the monitor,

>>keyboard and mouse.

>>

>>John

>>

>>PS: That blah blah blah stuff are important parameters in the bugcheck

>>error message. It may help someone find an answer to the problem if

>>they know the 4 parameters.

>

>

> I managed to get Win2000 installed after numerous attempts but I believe some

> files were not installed properly. Now when I do something Windows generates some

> sort of error. For example if I bring up "control panel" I get a script error. I

> also get "Explorer has generated errors and will be closed ...".

>

> I tried doing an emergency repair procedure from the Win2000 installation CD. It

> dis it's job but I don't think it copied anything to the HD. It only seemed to

> check the HD and not copy any files.

>

> I can get to Internet but most pages including upgrade pages pop up a script

> error.

>

> Could I just copy the contents of SYSTEM32 from another computer to this computer

> if the problem is that a dll is bad or corrupt?

 

If it were only one or two files I would say that you could give it a

try but I cannot advise that you copy the whole contents of the system32

folder from another machine, that would most likely make matters much

worse than they are now.

 

Try to do a proper "in-place upgrade" aka Repair Install.

 

How to perform an in-place upgrade of Windows 2000

http://support.microsoft.com/kb/292175

 

 

My installation CD says it has service pack 1.

 

After you do the in-place upgrade reapply SP4 and post SP4 hotfixes.

 

John

[Guest Op]

Re: file is missing or corrupt: ntoskrnl.exe

 

I found the culprit: bad memory. Memtest reported lots of errors.

 

Man did I put an effort: I disassembled three computers for parts, cables, hds! I

should have tried memtest first! the computer in question used to work for years

with no problems.

[Guest John John]

Re: file is missing or corrupt: ntoskrnl.exe

 

Thanks for letting us know how you fixed it.

 

John

 

Op wrote:

> I found the culprit: bad memory. Memtest reported lots of errors.

>

> Man did I put an effort: I disassembled three computers for parts, cables, hds! I

> should have tried memtest first! the computer in question used to work for years

> with no problems.