Cant Install XP Pro x64

October 28, 2007

Ive decided that I absolutely HATE vista (which came pre-installed on my

computer) and want to install XP Pro x64 on my computer in its place.

I have a 3 HDD RAID 0 configuration, no floppy drive (a 52 in 1 card reader

in its place), and an i680 EVGA MB. Additionally, I was not given any RAID

drivers with the computer, just the OS software and a recovery disk. I have

alot of data already on the 3 other partitions of my RAID drive so I dont

want to destroy the RAID to get XP Pro x64.

During the OS install, I get an error that no HDD was detected. When I

press the F6 (I think that is the key) to install 3rd party SCSI or RAID

controller, I eventually get pushed to another screen that says no floppy was

detected then booted back to the no HDD was detected screen.

So, where is this RAID driver (its not obvious on the EVGA website - just

the newest "motherboard drivers" are there) and once I have the driver, how

do I get the XP Pro x64 installer to install it since I have no floppy?

Any and all help would be greatly appreciated.

October 28, 2007

Re: Cant Install XP Pro x64

1.) There may not _be_ XP x64 drivers for your RAID controller. But if

there are, eVGA would be the place to start. You can also look at the

website for the RAID controller OEM. I don't know that board so don't know

which one it is. If you don't see one for XP x64, look for one for Server

2003 x64. That will work just fine.

2.) You'll almost certainly need to unplug that card reader thing if it

plugs into USB internally, as most do. Having USB hard drives attached

during install tends to screw up the enumeration of hard drives and cause

failures.

3.) There is no easy way around having a floppy for the install. Borrow one

from another machine, or buy an inexpensive one. USB is acceptable in most

cases. The pre-Vista versions of Windows _only_ support floppy for loading

drivers via F6. The only other alternative requires building a special

version of the install CD that has the drivers streamlined into it. It's

non-trivial. Given that the cost of a floppy drive is on the order of $15-20

USD, I'd suggest that's a lot more sensible option.

4.) You say you have a lot of data that you don't want to lose on your RAID

0. Please be aware that having 3 drives in RAID-0 actually INCREASES your

risk of catastrophic failure and total data loss. RAID-0 provides no

redundancy and the failure of any one of the 3 drives will totally screw

you.

--

Charlie.

http://msmvps.com/xperts64

http://mvp.support.microsoft.com/profile/charlie.russel

"Ronis" <Ronis@discussions.microsoft.com> wrote in message

news:0F6C8A58-25CB-40E8-B6B9-1251D5230D89@microsoft.com...

> Ive decided that I absolutely HATE vista (which came pre-installed on my

> computer) and want to install XP Pro x64 on my computer in its place.

>

> I have a 3 HDD RAID 0 configuration, no floppy drive (a 52 in 1 card

> reader

> in its place), and an i680 EVGA MB. Additionally, I was not given any

> RAID

> drivers with the computer, just the OS software and a recovery disk. I

> have

> alot of data already on the 3 other partitions of my RAID drive so I dont

> want to destroy the RAID to get XP Pro x64.

>

> During the OS install, I get an error that no HDD was detected. When I

> press the F6 (I think that is the key) to install 3rd party SCSI or RAID

> controller, I eventually get pushed to another screen that says no floppy

> was

> detected then booted back to the no HDD was detected screen.

>

> So, where is this RAID driver (its not obvious on the EVGA website - just

> the newest "motherboard drivers" are there) and once I have the driver,

> how

> do I get the XP Pro x64 installer to install it since I have no floppy?

>

> Any and all help would be greatly appreciated.

October 28, 2007

Re: Cant Install XP Pro x64

Charlie, ty for your fast response. I will address each of your points:

#1. I found my RAID driver within a very well written HOW TO area of the

EVGA website. Thanks for the reference

#2. Ill try unplugging the card reader if it causes issues down the road -

its currently assigned drives H-L or something silly like that.

#3. Ugh, I cant get around the floppy disk issue? I suppose I can go buy a

USB drive from a local vendor and then return it after im done . . . First

Ill try putting my files on a USB Flash Drive and pray, then probably go buy

a USB floppy.

#4. Thanks for the reminder about RAID and catastrophic failures. I'll save

all my critical files on either a networked HDD or the other non-RAID HDD on

my system. I wanted (and got) sheer speed, I just dont want to reinstall and

update 180GB of programs if I can avoid it.

Thanks so much.

Ron

"Charlie Russel - MVP" wrote:

> 1.) There may not _be_ XP x64 drivers for your RAID controller. But if

> there are, eVGA would be the place to start. You can also look at the

> website for the RAID controller OEM. I don't know that board so don't know

> which one it is. If you don't see one for XP x64, look for one for Server

> 2003 x64. That will work just fine.

>

> 2.) You'll almost certainly need to unplug that card reader thing if it

> plugs into USB internally, as most do. Having USB hard drives attached

> during install tends to screw up the enumeration of hard drives and cause

> failures.

>

> 3.) There is no easy way around having a floppy for the install. Borrow one

> from another machine, or buy an inexpensive one. USB is acceptable in most

> cases. The pre-Vista versions of Windows _only_ support floppy for loading

> drivers via F6. The only other alternative requires building a special

> version of the install CD that has the drivers streamlined into it. It's

> non-trivial. Given that the cost of a floppy drive is on the order of $15-20

> USD, I'd suggest that's a lot more sensible option.

>

> 4.) You say you have a lot of data that you don't want to lose on your RAID

> 0. Please be aware that having 3 drives in RAID-0 actually INCREASES your

> risk of catastrophic failure and total data loss. RAID-0 provides no

> redundancy and the failure of any one of the 3 drives will totally screw

> you.

>

> --

> Charlie.

> http://msmvps.com/xperts64

> http://mvp.support.microsoft.com/profile/charlie.russel

>

> "Ronis" <Ronis@discussions.microsoft.com> wrote in message

> news:0F6C8A58-25CB-40E8-B6B9-1251D5230D89@microsoft.com...

> > Ive decided that I absolutely HATE vista (which came pre-installed on my

> > computer) and want to install XP Pro x64 on my computer in its place.

> >

> > I have a 3 HDD RAID 0 configuration, no floppy drive (a 52 in 1 card

> > reader

> > in its place), and an i680 EVGA MB. Additionally, I was not given any

> > RAID

> > drivers with the computer, just the OS software and a recovery disk. I

> > have

> > alot of data already on the 3 other partitions of my RAID drive so I dont

> > want to destroy the RAID to get XP Pro x64.

> >

> > During the OS install, I get an error that no HDD was detected. When I

> > press the F6 (I think that is the key) to install 3rd party SCSI or RAID

> > controller, I eventually get pushed to another screen that says no floppy

> > was

> > detected then booted back to the no HDD was detected screen.

> >

> > So, where is this RAID driver (its not obvious on the EVGA website - just

> > the newest "motherboard drivers" are there) and once I have the driver,

> > how

> > do I get the XP Pro x64 installer to install it since I have no floppy?

> >

> > Any and all help would be greatly appreciated.

>

October 28, 2007

Re: Cant Install XP Pro x64

Ronis <Ronis@discussions.microsoft.com> wrote:

> #3. Ugh, I cant get around the floppy disk issue? I suppose I can

> go buy a USB drive from a local vendor and then return it after im

> done . . . First Ill try putting my files on a USB Flash Drive and

> pray, then probably go buy a USB floppy.

If I recall correctly, the XP installer demands the files be on drive

"A". If you can make BIOS see the flash drive as drive "A" it will

work, otherwise it probably won't.

--

XS11E, Killing all posts from Google Groups

The Usenet Improvement Project:

http://improve-usenet.org

October 28, 2007

Re: Cant Install XP Pro x64

1.) Good.

2.) Strongly recommended

3.) Nope. Won't work. No workaround short of a slipstreamed install. The XP

x64 install is the same basic NT install that has existed since the original

version of Windows NT - NT 3.1. It's _very_ stupid. I have two floppy

drives - one an ancient internal drive I pulled from a system I was

discarding. The other a USB floppy. I have both in zip-lock bags, sitting on

a shelf in the back of the parts cabinet. They're there for the very few

times I need such a thing. Buy an inexpensive floppy - doesn't need to be

USB, but certainly it could be. But non-USB is cheaper. You'll need it if

you ever need to recover the system, so you might as well hang on to it.

Keep the cable with it, and stick it somewhere for if you ever need it.

4.) Data - no problem. Programs? You're going to have to completely

re-install. You can't "upgrade" to x64, you need to do a clean, fresh,

install. That means wiping and formatting the OS partition.

Charlie.

http://msmvps.com/xperts64

http://mvp.support.microsoft.com/profile/charlie.russel

----- Original Message -----

From: "Ronis" <Ronis@discussions.microsoft.com>

Newsgroups: microsoft.public.windows.64bit.general

Sent: Sunday, October 28, 2007 8:44 AM

Subject: Re: Cant Install XP Pro x64

> Charlie, ty for your fast response. I will address each of your points:

>

> #1. I found my RAID driver within a very well written HOW TO area of the

> EVGA website. Thanks for the reference

>

> #2. Ill try unplugging the card reader if it causes issues down the road -

> its currently assigned drives H-L or something silly like that.

>

> #3. Ugh, I cant get around the floppy disk issue? I suppose I can go buy

> a

> USB drive from a local vendor and then return it after im done . . . First

> Ill try putting my files on a USB Flash Drive and pray, then probably go

> buy

> a USB floppy.

>

> #4. Thanks for the reminder about RAID and catastrophic failures. I'll

> save

> all my critical files on either a networked HDD or the other non-RAID HDD

> on

> my system. I wanted (and got) sheer speed, I just dont want to reinstall

> and

> update 180GB of programs if I can avoid it.

>

> Thanks so much.

>

> Ron

>

> "Charlie Russel - MVP" wrote:

>

>> 1.) There may not _be_ XP x64 drivers for your RAID controller. But if

>> there are, eVGA would be the place to start. You can also look at the

>> website for the RAID controller OEM. I don't know that board so don't

>> know

>> which one it is. If you don't see one for XP x64, look for one for Server

>> 2003 x64. That will work just fine.

>>

>> 2.) You'll almost certainly need to unplug that card reader thing if it

>> plugs into USB internally, as most do. Having USB hard drives attached

>> during install tends to screw up the enumeration of hard drives and cause

>> failures.

>>

>> 3.) There is no easy way around having a floppy for the install. Borrow

>> one

>> from another machine, or buy an inexpensive one. USB is acceptable in

>> most

>> cases. The pre-Vista versions of Windows _only_ support floppy for

>> loading

>> drivers via F6. The only other alternative requires building a special

>> version of the install CD that has the drivers streamlined into it. It's

>> non-trivial. Given that the cost of a floppy drive is on the order of

>> $15-20

>> USD, I'd suggest that's a lot more sensible option.

>>

>> 4.) You say you have a lot of data that you don't want to lose on your

>> RAID

>> 0. Please be aware that having 3 drives in RAID-0 actually INCREASES your

>> risk of catastrophic failure and total data loss. RAID-0 provides no

>> redundancy and the failure of any one of the 3 drives will totally screw

>> you.

>>

>> --

>> Charlie.

>> http://msmvps.com/xperts64

>> http://mvp.support.microsoft.com/profile/charlie.russel

>>

>> "Ronis" <Ronis@discussions.microsoft.com> wrote in message

>> news:0F6C8A58-25CB-40E8-B6B9-1251D5230D89@microsoft.com...

>> > Ive decided that I absolutely HATE vista (which came pre-installed on

>> > my

>> > computer) and want to install XP Pro x64 on my computer in its place.

>> >

>> > I have a 3 HDD RAID 0 configuration, no floppy drive (a 52 in 1 card

>> > reader

>> > in its place), and an i680 EVGA MB. Additionally, I was not given any

>> > RAID

>> > drivers with the computer, just the OS software and a recovery disk. I

>> > have

>> > alot of data already on the 3 other partitions of my RAID drive so I

>> > dont

>> > want to destroy the RAID to get XP Pro x64.

>> >

>> > During the OS install, I get an error that no HDD was detected. When I

>> > press the F6 (I think that is the key) to install 3rd party SCSI or

>> > RAID

>> > controller, I eventually get pushed to another screen that says no

>> > floppy

>> > was

>> > detected then booted back to the no HDD was detected screen.

>> >

>> > So, where is this RAID driver (its not obvious on the EVGA website -

>> > just

>> > the newest "motherboard drivers" are there) and once I have the driver,

>> > how

>> > do I get the XP Pro x64 installer to install it since I have no floppy?

>> >

>> > Any and all help would be greatly appreciated.

>>

--

Charlie.

http://msmvps.com/xperts64

http://mvp.support.microsoft.com/profile/charlie.russel

"Ronis" <Ronis@discussions.microsoft.com> wrote in message

news:AE51821C-DD54-4C71-BFD7-3CABBACF653E@microsoft.com...

> Charlie, ty for your fast response. I will address each of your points:

>

> #1. I found my RAID driver within a very well written HOW TO area of the

> EVGA website. Thanks for the reference

>

> #2. Ill try unplugging the card reader if it causes issues down the road -

> its currently assigned drives H-L or something silly like that.

>

> #3. Ugh, I cant get around the floppy disk issue? I suppose I can go buy

> a

> USB drive from a local vendor and then return it after im done . . . First

> Ill try putting my files on a USB Flash Drive and pray, then probably go

> buy

> a USB floppy.

>

> #4. Thanks for the reminder about RAID and catastrophic failures. I'll

> save

> all my critical files on either a networked HDD or the other non-RAID HDD

> on

> my system. I wanted (and got) sheer speed, I just dont want to reinstall

> and

> update 180GB of programs if I can avoid it.

>

> Thanks so much.

>

> Ron

>

> "Charlie Russel - MVP" wrote:

>

>> 1.) There may not _be_ XP x64 drivers for your RAID controller. But if

>> there are, eVGA would be the place to start. You can also look at the

>> website for the RAID controller OEM. I don't know that board so don't

>> know

>> which one it is. If you don't see one for XP x64, look for one for Server

>> 2003 x64. That will work just fine.

>>

>> 2.) You'll almost certainly need to unplug that card reader thing if it

>> plugs into USB internally, as most do. Having USB hard drives attached

>> during install tends to screw up the enumeration of hard drives and cause

>> failures.

>>

>> 3.) There is no easy way around having a floppy for the install. Borrow

>> one

>> from another machine, or buy an inexpensive one. USB is acceptable in

>> most

>> cases. The pre-Vista versions of Windows _only_ support floppy for

>> loading

>> drivers via F6. The only other alternative requires building a special

>> version of the install CD that has the drivers streamlined into it. It's

>> non-trivial. Given that the cost of a floppy drive is on the order of

>> $15-20

>> USD, I'd suggest that's a lot more sensible option.

>>

>> 4.) You say you have a lot of data that you don't want to lose on your

>> RAID

>> 0. Please be aware that having 3 drives in RAID-0 actually INCREASES your

>> risk of catastrophic failure and total data loss. RAID-0 provides no

>> redundancy and the failure of any one of the 3 drives will totally screw

>> you.

>>

>> --

>> Charlie.

>> http://msmvps.com/xperts64

>> http://mvp.support.microsoft.com/profile/charlie.russel

>>

>> "Ronis" <Ronis@discussions.microsoft.com> wrote in message

>> news:0F6C8A58-25CB-40E8-B6B9-1251D5230D89@microsoft.com...

>> > Ive decided that I absolutely HATE vista (which came pre-installed on

>> > my

>> > computer) and want to install XP Pro x64 on my computer in its place.

>> >

>> > I have a 3 HDD RAID 0 configuration, no floppy drive (a 52 in 1 card

>> > reader

>> > in its place), and an i680 EVGA MB. Additionally, I was not given any

>> > RAID

>> > drivers with the computer, just the OS software and a recovery disk. I

>> > have

>> > alot of data already on the 3 other partitions of my RAID drive so I

>> > dont

>> > want to destroy the RAID to get XP Pro x64.

>> >

>> > During the OS install, I get an error that no HDD was detected. When I

>> > press the F6 (I think that is the key) to install 3rd party SCSI or

>> > RAID

>> > controller, I eventually get pushed to another screen that says no

>> > floppy

>> > was

>> > detected then booted back to the no HDD was detected screen.

>> >

>> > So, where is this RAID driver (its not obvious on the EVGA website -

>> > just

>> > the newest "motherboard drivers" are there) and once I have the driver,

>> > how

>> > do I get the XP Pro x64 installer to install it since I have no floppy?

>> >

>> > Any and all help would be greatly appreciated.

>>

October 28, 2007

Re: Cant Install XP Pro x64

Try looking in the devices in control panel hardware tab. Go down to SCSI

controllers and raid devices, you can usually see the id for the raid setup.

Do a search on google for the drivers. The driver setup will end with a

Textoemsetup file if the driver is then transferred to a removable drive,

floppy, or flash card it can be referenced when asked for. It is usually

done with the floppy drive because that is how installation is setup. Look

in windows explorer and see if card reader shows in explorer, You may need

to go into bios and set machine to boot from cd first, removable drives

second then hdd's.

"Ronis" <Ronis@discussions.microsoft.com> wrote in message

news:0F6C8A58-25CB-40E8-B6B9-1251D5230D89@microsoft.com...

> Ive decided that I absolutely HATE vista (which came pre-installed on my

> computer) and want to install XP Pro x64 on my computer in its place.

>

> I have a 3 HDD RAID 0 configuration, no floppy drive (a 52 in 1 card

> reader

> in its place), and an i680 EVGA MB. Additionally, I was not given any

> RAID

> drivers with the computer, just the OS software and a recovery disk. I

> have

> alot of data already on the 3 other partitions of my RAID drive so I dont

> want to destroy the RAID to get XP Pro x64.

>

> During the OS install, I get an error that no HDD was detected. When I

> press the F6 (I think that is the key) to install 3rd party SCSI or RAID

> controller, I eventually get pushed to another screen that says no floppy

> was

> detected then booted back to the no HDD was detected screen.

>

> So, where is this RAID driver (its not obvious on the EVGA website - just

> the newest "motherboard drivers" are there) and once I have the driver,

> how

> do I get the XP Pro x64 installer to install it since I have no floppy?

>

> Any and all help would be greatly appreciated.

October 28, 2007

Re: Cant Install XP Pro x64

I forgot to mention that when you go into bios only work with "Boot

Priority" leave "HDD" section alone as this determines which hard drive is

the boot drive. You still might need to have a floppy drive if bios will not

set card reader a a boot device before hdd's and recognize it as "A" drive.

Remember also that xp64 drivers are limited and you may be best suited by xp

pro x32. Thr raid drivers might be available but I have found that such

things as printer and scanner drivers have not been ported for x64 and with

the advent of Vista64 most of the attention seems to go to drivers for that

x64 OS. xp pro 32 will work just fine if you have it...Aloha

"Randy Gentry" <Gentryr001@hawaii.rr.com> wrote in message

news:eRKt%23jYGIHA.4684@TK2MSFTNGP06.phx.gbl...

> Try looking in the devices in control panel hardware tab. Go down to SCSI

> controllers and raid devices, you can usually see the id for the raid

> setup. Do a search on google for the drivers. The driver setup will end

> with a Textoemsetup file if the driver is then transferred to a removable

> drive, floppy, or flash card it can be referenced when asked for. It is

> usually done with the floppy drive because that is how installation is

> setup. Look in windows explorer and see if card reader shows in explorer,

> You may need to go into bios and set machine to boot from cd first,

> removable drives second then hdd's.

> "Ronis" <Ronis@discussions.microsoft.com> wrote in message

> news:0F6C8A58-25CB-40E8-B6B9-1251D5230D89@microsoft.com...

>> Ive decided that I absolutely HATE vista (which came pre-installed on my

>> computer) and want to install XP Pro x64 on my computer in its place.

>>

>> I have a 3 HDD RAID 0 configuration, no floppy drive (a 52 in 1 card

>> reader

>> in its place), and an i680 EVGA MB. Additionally, I was not given any

>> RAID

>> drivers with the computer, just the OS software and a recovery disk. I

>> have

>> alot of data already on the 3 other partitions of my RAID drive so I dont

>> want to destroy the RAID to get XP Pro x64.

>>

>> During the OS install, I get an error that no HDD was detected. When I

>> press the F6 (I think that is the key) to install 3rd party SCSI or RAID

>> controller, I eventually get pushed to another screen that says no floppy

>> was

>> detected then booted back to the no HDD was detected screen.

>>

>> So, where is this RAID driver (its not obvious on the EVGA website - just

>> the newest "motherboard drivers" are there) and once I have the driver,

>> how

>> do I get the XP Pro x64 installer to install it since I have no floppy?

>>

>> Any and all help would be greatly appreciated.

>

October 29, 2007

Re: Cant Install XP Pro x64

Thank you all for the outpouring of support and info. The reason I need a 64

bit OS is that my computer has 8 GB of RAM and 2x8800GTX cards. I usually

have 1-1.5 GB of free RAM when Im running under full speed, so I cant do a

32bit OS.

I found a super cheap USB Floppy at newegg.com for $17+shipping, and thats

pretty cheap. Unfortunately, I dont have a free floppy drive bay as my 52 in

1 card reader filled it. No matter, so long as the USB Floppy will work, I

can go buy a $50 drive from Staples (the closest vendor), install, return it

and wait for my $17 drive to arrive.

Im not sure I understood what Randy wrote about changing boot order as I

already have to boot from the CD to install the OS. If I could trick the

computer into thinking the USB port on my 52 in 1 card reader was drive A . .

..

Thank you all, I believe my problem will be solved by the time my post

actually goes live as Staples is 3 blocks from my house.

Thank you all very much for the support.

Ron

Changing drive

"Randy Gentry" wrote:

> I forgot to mention that when you go into bios only work with "Boot

> Priority" leave "HDD" section alone as this determines which hard drive is

> the boot drive. You still might need to have a floppy drive if bios will not

> set card reader a a boot device before hdd's and recognize it as "A" drive.

> Remember also that xp64 drivers are limited and you may be best suited by xp

> pro x32. Thr raid drivers might be available but I have found that such

> things as printer and scanner drivers have not been ported for x64 and with

> the advent of Vista64 most of the attention seems to go to drivers for that

> x64 OS. xp pro 32 will work just fine if you have it...Aloha

> "Randy Gentry" <Gentryr001@hawaii.rr.com> wrote in message

> news:eRKt%23jYGIHA.4684@TK2MSFTNGP06.phx.gbl...

> > Try looking in the devices in control panel hardware tab. Go down to SCSI

> > controllers and raid devices, you can usually see the id for the raid

> > setup. Do a search on google for the drivers. The driver setup will end

> > with a Textoemsetup file if the driver is then transferred to a removable

> > drive, floppy, or flash card it can be referenced when asked for. It is

> > usually done with the floppy drive because that is how installation is

> > setup. Look in windows explorer and see if card reader shows in explorer,

> > You may need to go into bios and set machine to boot from cd first,

> > removable drives second then hdd's.

> > "Ronis" <Ronis@discussions.microsoft.com> wrote in message

> > news:0F6C8A58-25CB-40E8-B6B9-1251D5230D89@microsoft.com...

> >> Ive decided that I absolutely HATE vista (which came pre-installed on my

> >> computer) and want to install XP Pro x64 on my computer in its place.

> >>

> >> I have a 3 HDD RAID 0 configuration, no floppy drive (a 52 in 1 card

> >> reader

> >> in its place), and an i680 EVGA MB. Additionally, I was not given any

> >> RAID

> >> drivers with the computer, just the OS software and a recovery disk. I

> >> have

> >> alot of data already on the 3 other partitions of my RAID drive so I dont

> >> want to destroy the RAID to get XP Pro x64.

> >>

> >> During the OS install, I get an error that no HDD was detected. When I

> >> press the F6 (I think that is the key) to install 3rd party SCSI or RAID

> >> controller, I eventually get pushed to another screen that says no floppy

> >> was

> >> detected then booted back to the no HDD was detected screen.

> >>

> >> So, where is this RAID driver (its not obvious on the EVGA website - just

> >> the newest "motherboard drivers" are there) and once I have the driver,

> >> how

> >> do I get the XP Pro x64 installer to install it since I have no floppy?

> >>

> >> Any and all help would be greatly appreciated.

> >

>

October 29, 2007

Re: Cant Install XP Pro x64

Hi, Ronis.

> Unfortunately, I dont have a free floppy drive bay as my 52 in

> 1 card reader filled it.

No matter. Just connect the cables (power and data) to the floppy outside

the computer case. Especially since this is to be a very temporary

arrangement.

RC

--

R. C. White, CPA

San Marcos, TX

rc@grandecom.net

Microsoft Windows MVP

(Running Windows Live Mail beta 2 in Vista Ultimate x64)

"Ronis" <Ronis@discussions.microsoft.com> wrote in message

news:D1631451-7056-4A7D-9209-AF12FC0C9659@microsoft.com...

> Thank you all for the outpouring of support and info. The reason I need a

> 64

> bit OS is that my computer has 8 GB of RAM and 2x8800GTX cards. I usually

> have 1-1.5 GB of free RAM when Im running under full speed, so I cant do a

> 32bit OS.

>

> I found a super cheap USB Floppy at newegg.com for $17+shipping, and thats

> pretty cheap. Unfortunately, I dont have a free floppy drive bay as my 52

> in

> 1 card reader filled it. No matter, so long as the USB Floppy will work,

> I

> can go buy a $50 drive from Staples (the closest vendor), install, return

> it

> and wait for my $17 drive to arrive.

>

> Im not sure I understood what Randy wrote about changing boot order as I

> already have to boot from the CD to install the OS. If I could trick the

> computer into thinking the USB port on my 52 in 1 card reader was drive A

> . .

> .

>

> Thank you all, I believe my problem will be solved by the time my post

> actually goes live as Staples is 3 blocks from my house.

>

> Thank you all very much for the support.

>

> Ron

November 2, 2007

Re: Cant Install XP Pro x64

"Ronis" <Ronis@discussions.microsoft.com> wrote in message

news:0F6C8A58-25CB-40E8-B6B9-1251D5230D89@microsoft.com...

> Ive decided that I absolutely HATE vista (which came pre-installed on my

> computer) and want to install XP Pro x64 on my computer in its place.

>

> I have a 3 HDD RAID 0 configuration, no floppy drive (a 52 in 1 card

> reader

> in its place), and an i680 EVGA MB. Additionally, I was not given any

> RAID

> drivers with the computer, just the OS software and a recovery disk. I

> have

> alot of data already on the 3 other partitions of my RAID drive so I dont

> want to destroy the RAID to get XP Pro x64.

>

> During the OS install, I get an error that no HDD was detected. When I

> press the F6 (I think that is the key) to install 3rd party SCSI or RAID

> controller, I eventually get pushed to another screen that says no floppy

> was

> detected then booted back to the no HDD was detected screen.

>

> So, where is this RAID driver (its not obvious on the EVGA website - just

> the newest "motherboard drivers" are there) and once I have the driver,

> how

> do I get the XP Pro x64 installer to install it since I have no floppy?

>

> Any and all help would be greatly appreciated.

I ran into that situation 18 months ago when I built my current desktop. I

had to flash the BIOS just to use the X2 4800+ CPU and also load the RAID

drivers. It's simple. You either use a floppy drive temporarily or

(possibly, haven't tried this yet) CD. I just used a 3.5" floppy drive for

doing this, myself.

McG.

Sign In

Cant Install XP Pro x64

Recommended Posts

Guest Ronis

Popular Days

Popular Days

Guest Charlie Russel - MVP

Guest Ronis

Guest XS11E

Guest Charlie Russel - MVP

Guest Randy Gentry

Guest Randy Gentry

Guest Ronis

Guest R. C. White

Guest McG.

Similar Content

Cant play Netflix or Youtube on ios 18.2

cant delete files

After Installing the latest windows 11 updateI cant access windows.

I cant install bluetooth

cant download realtek audio console

Browse

Activity

Site Info