Guest canna Posted November 9, 2007 Posted November 9, 2007 When the 2000 screen apear the loading bar gets about 3 quarters across and BSOD appears. It mentions about a virus and says run CHDSK /F. How can I fix this? I really need the files on the laptop for work. I got the laptop from a friend but it does not have a 2000 disk with it. I have gone to bootdisk. com and downloaded 4 disks and 2 .exe files. These are currently on my memory stick. The laptop doesn't have a floppy drive do I need to put these files on a CD? Many thanks in advance for your help. Canna
Guest Pegasus \(MVP\) Posted November 9, 2007 Posted November 9, 2007 Re: Win 2000 pro won't boot "canna" <canna@discussions.microsoft.com> wrote in message news:846809D4-8139-40AC-BB7B-9D7BB73CF8C2@microsoft.com... > When the 2000 screen apear the loading bar gets about 3 quarters across > and > BSOD appears. It mentions about a virus and says run CHDSK /F. > > How can I fix this? I really need the files on the laptop for work. I got > the laptop from a friend but it does not have a 2000 disk with it. > > I have gone to bootdisk. com and downloaded 4 disks and 2 .exe files. > These > are currently on my memory stick. The laptop doesn't have a floppy drive > do I > need to put these files on a CD? > > Many thanks in advance for your help. > > Canna Here are a few options: - Try booting in Safe Mode, by pressing F8 early during the boot phase. - Boot the machine with a Bart PE boot CD (http://www.bootdisk.com), then copy the files to a flash disk. - Remove the disk, then install it in an external USB case so that you can access your files on some other PC. This would be a good time to review your backup policy. In a robust installation, important files always reside on at least two independent media.
Guest mtkagal Posted November 9, 2007 Posted November 9, 2007 RE: Win 2000 pro won't boot You should be able to copy the files from the memory stick to your laptop by using the USB port. Did you try to run the CHDSK /F from the Start and then run area? "canna" wrote: > When the 2000 screen apear the loading bar gets about 3 quarters across and > BSOD appears. It mentions about a virus and says run CHDSK /F. > > How can I fix this? I really need the files on the laptop for work. I got > the laptop from a friend but it does not have a 2000 disk with it. > > I have gone to bootdisk. com and downloaded 4 disks and 2 .exe files. These > are currently on my memory stick. The laptop doesn't have a floppy drive do I > need to put these files on a CD? > > Many thanks in advance for your help. > > Canna
Guest canna Posted November 12, 2007 Posted November 12, 2007 Re: Win 2000 pro won't boot Thanks for your response. I should have mentioned that it BSOD's even in safe mode, infact every option I select from the F8 menu just BSOD's. BART PE requires a Windows 2000 installation disk which I don't have. I'm currently searching and asking people if they could lend me their copy but not many home users seem to run win 2000. Is there anything else I could try in the meantime? Thanks "Pegasus (MVP)" wrote: > > "canna" <canna@discussions.microsoft.com> wrote in message > news:846809D4-8139-40AC-BB7B-9D7BB73CF8C2@microsoft.com... > > When the 2000 screen apear the loading bar gets about 3 quarters across > > and > > BSOD appears. It mentions about a virus and says run CHDSK /F. > > > > How can I fix this? I really need the files on the laptop for work. I got > > the laptop from a friend but it does not have a 2000 disk with it. > > > > I have gone to bootdisk. com and downloaded 4 disks and 2 .exe files. > > These > > are currently on my memory stick. The laptop doesn't have a floppy drive > > do I > > need to put these files on a CD? > > > > Many thanks in advance for your help. > > > > Canna > > Here are a few options: > - Try booting in Safe Mode, by pressing F8 early during the boot phase. > - Boot the machine with a Bart PE boot CD (http://www.bootdisk.com), > then copy the files to a flash disk. > - Remove the disk, then install it in an external USB case so that you > can access your files on some other PC. > > This would be a good time to review your backup policy. > In a robust installation, important files always reside on at > least two independent media. > > >
Guest Pegasus \(MVP\) Posted November 12, 2007 Posted November 12, 2007 Re: Win 2000 pro won't boot This is incorrect. A Bart PE boot CD requires a WinXP Professional CD. There should be lots of those around. "canna" <canna@discussions.microsoft.com> wrote in message news:1B79CB20-7A9F-4F1E-979F-F257AE0B2CA9@microsoft.com... > Thanks for your response. I should have mentioned that it BSOD's even in > safe > mode, infact every option I select from the F8 menu just BSOD's. > > BART PE requires a Windows 2000 installation disk which I don't have. I'm > currently searching and asking people if they could lend me their copy but > not many home users seem to run win 2000. > > Is there anything else I could try in the meantime? > > Thanks > > "Pegasus (MVP)" wrote: > >> >> "canna" <canna@discussions.microsoft.com> wrote in message >> news:846809D4-8139-40AC-BB7B-9D7BB73CF8C2@microsoft.com... >> > When the 2000 screen apear the loading bar gets about 3 quarters across >> > and >> > BSOD appears. It mentions about a virus and says run CHDSK /F. >> > >> > How can I fix this? I really need the files on the laptop for work. I >> > got >> > the laptop from a friend but it does not have a 2000 disk with it. >> > >> > I have gone to bootdisk. com and downloaded 4 disks and 2 .exe files. >> > These >> > are currently on my memory stick. The laptop doesn't have a floppy >> > drive >> > do I >> > need to put these files on a CD? >> > >> > Many thanks in advance for your help. >> > >> > Canna >> >> Here are a few options: >> - Try booting in Safe Mode, by pressing F8 early during the boot phase. >> - Boot the machine with a Bart PE boot CD (http://www.bootdisk.com), >> then copy the files to a flash disk. >> - Remove the disk, then install it in an external USB case so that you >> can access your files on some other PC. >> >> This would be a good time to review your backup policy. >> In a robust installation, important files always reside on at >> least two independent media. >> >> >>
Guest canna Posted November 12, 2007 Posted November 12, 2007 Re: Win 2000 pro won't boot Thanks, I have a XP OEM PC at home. Would the recovery disk from this work? Thanks "Pegasus (MVP)" wrote: > This is incorrect. A Bart PE boot CD requires a WinXP > Professional CD. There should be lots of those around. > > "canna" <canna@discussions.microsoft.com> wrote in message > news:1B79CB20-7A9F-4F1E-979F-F257AE0B2CA9@microsoft.com... > > Thanks for your response. I should have mentioned that it BSOD's even in > > safe > > mode, infact every option I select from the F8 menu just BSOD's. > > > > BART PE requires a Windows 2000 installation disk which I don't have. I'm > > currently searching and asking people if they could lend me their copy but > > not many home users seem to run win 2000. > > > > Is there anything else I could try in the meantime? > > > > Thanks > > > > "Pegasus (MVP)" wrote: > > > >> > >> "canna" <canna@discussions.microsoft.com> wrote in message > >> news:846809D4-8139-40AC-BB7B-9D7BB73CF8C2@microsoft.com... > >> > When the 2000 screen apear the loading bar gets about 3 quarters across > >> > and > >> > BSOD appears. It mentions about a virus and says run CHDSK /F. > >> > > >> > How can I fix this? I really need the files on the laptop for work. I > >> > got > >> > the laptop from a friend but it does not have a 2000 disk with it. > >> > > >> > I have gone to bootdisk. com and downloaded 4 disks and 2 .exe files. > >> > These > >> > are currently on my memory stick. The laptop doesn't have a floppy > >> > drive > >> > do I > >> > need to put these files on a CD? > >> > > >> > Many thanks in advance for your help. > >> > > >> > Canna > >> > >> Here are a few options: > >> - Try booting in Safe Mode, by pressing F8 early during the boot phase. > >> - Boot the machine with a Bart PE boot CD (http://www.bootdisk.com), > >> then copy the files to a flash disk. > >> - Remove the disk, then install it in an external USB case so that you > >> can access your files on some other PC. > >> > >> This would be a good time to review your backup policy. > >> In a robust installation, important files always reside on at > >> least two independent media. > >> > >> > >> > > >
Guest Pegasus \(MVP\) Posted November 12, 2007 Posted November 12, 2007 Re: Win 2000 pro won't boot It does not matter what you have at home. What matters is that you need a WinXP Professional CD. The emphasis is on "CD"! Manufacturing the Bart PE CD can take you anything between half an hour and three hours, depending on you level of skill and experience. Removing the disk might be a quicker option. "canna" <canna@discussions.microsoft.com> wrote in message news:93CB117E-273D-4B58-8822-CD0E69E4E874@microsoft.com... > Thanks, I have a XP OEM PC at home. Would the recovery disk from this > work? > > Thanks > > "Pegasus (MVP)" wrote: > >> This is incorrect. A Bart PE boot CD requires a WinXP >> Professional CD. There should be lots of those around. >> >> "canna" <canna@discussions.microsoft.com> wrote in message >> news:1B79CB20-7A9F-4F1E-979F-F257AE0B2CA9@microsoft.com... >> > Thanks for your response. I should have mentioned that it BSOD's even >> > in >> > safe >> > mode, infact every option I select from the F8 menu just BSOD's. >> > >> > BART PE requires a Windows 2000 installation disk which I don't have. >> > I'm >> > currently searching and asking people if they could lend me their copy >> > but >> > not many home users seem to run win 2000. >> > >> > Is there anything else I could try in the meantime? >> > >> > Thanks >> > >> > "Pegasus (MVP)" wrote: >> > >> >> >> >> "canna" <canna@discussions.microsoft.com> wrote in message >> >> news:846809D4-8139-40AC-BB7B-9D7BB73CF8C2@microsoft.com... >> >> > When the 2000 screen apear the loading bar gets about 3 quarters >> >> > across >> >> > and >> >> > BSOD appears. It mentions about a virus and says run CHDSK /F. >> >> > >> >> > How can I fix this? I really need the files on the laptop for work. >> >> > I >> >> > got >> >> > the laptop from a friend but it does not have a 2000 disk with it. >> >> > >> >> > I have gone to bootdisk. com and downloaded 4 disks and 2 .exe >> >> > files. >> >> > These >> >> > are currently on my memory stick. The laptop doesn't have a floppy >> >> > drive >> >> > do I >> >> > need to put these files on a CD? >> >> > >> >> > Many thanks in advance for your help. >> >> > >> >> > Canna >> >> >> >> Here are a few options: >> >> - Try booting in Safe Mode, by pressing F8 early during the boot >> >> phase. >> >> - Boot the machine with a Bart PE boot CD (http://www.bootdisk.com), >> >> then copy the files to a flash disk. >> >> - Remove the disk, then install it in an external USB case so that you >> >> can access your files on some other PC. >> >> >> >> This would be a good time to review your backup policy. >> >> In a robust installation, important files always reside on at >> >> least two independent media. >> >> >> >> >> >> >> >> >>
Guest canna Posted November 12, 2007 Posted November 12, 2007 Re: Win 2000 pro won't boot So if I remove the disk from the laptop, how would I make it work on my XP PC and how would I get the files? Do I need a cable? Won't the error on the disk just appear the same as on the laptop? Sorry about all the questions, i have never done this before as you can probably tell. Thanks for taking the time to respond and your help. "Pegasus (MVP)" wrote: > It does not matter what you have at home. What matters > is that you need a WinXP Professional CD. The emphasis > is on "CD"! > > Manufacturing the Bart PE CD can take you anything > between half an hour and three hours, depending on you > level of skill and experience. Removing the disk might > be a quicker option. > > > "canna" <canna@discussions.microsoft.com> wrote in message > news:93CB117E-273D-4B58-8822-CD0E69E4E874@microsoft.com... > > Thanks, I have a XP OEM PC at home. Would the recovery disk from this > > work? > > > > Thanks > > > > "Pegasus (MVP)" wrote: > > > >> This is incorrect. A Bart PE boot CD requires a WinXP > >> Professional CD. There should be lots of those around. > >> > >> "canna" <canna@discussions.microsoft.com> wrote in message > >> news:1B79CB20-7A9F-4F1E-979F-F257AE0B2CA9@microsoft.com... > >> > Thanks for your response. I should have mentioned that it BSOD's even > >> > in > >> > safe > >> > mode, infact every option I select from the F8 menu just BSOD's. > >> > > >> > BART PE requires a Windows 2000 installation disk which I don't have. > >> > I'm > >> > currently searching and asking people if they could lend me their copy > >> > but > >> > not many home users seem to run win 2000. > >> > > >> > Is there anything else I could try in the meantime? > >> > > >> > Thanks > >> > > >> > "Pegasus (MVP)" wrote: > >> > > >> >> > >> >> "canna" <canna@discussions.microsoft.com> wrote in message > >> >> news:846809D4-8139-40AC-BB7B-9D7BB73CF8C2@microsoft.com... > >> >> > When the 2000 screen apear the loading bar gets about 3 quarters > >> >> > across > >> >> > and > >> >> > BSOD appears. It mentions about a virus and says run CHDSK /F. > >> >> > > >> >> > How can I fix this? I really need the files on the laptop for work. > >> >> > I > >> >> > got > >> >> > the laptop from a friend but it does not have a 2000 disk with it. > >> >> > > >> >> > I have gone to bootdisk. com and downloaded 4 disks and 2 .exe > >> >> > files. > >> >> > These > >> >> > are currently on my memory stick. The laptop doesn't have a floppy > >> >> > drive > >> >> > do I > >> >> > need to put these files on a CD? > >> >> > > >> >> > Many thanks in advance for your help. > >> >> > > >> >> > Canna > >> >> > >> >> Here are a few options: > >> >> - Try booting in Safe Mode, by pressing F8 early during the boot > >> >> phase. > >> >> - Boot the machine with a Bart PE boot CD (http://www.bootdisk.com), > >> >> then copy the files to a flash disk. > >> >> - Remove the disk, then install it in an external USB case so that you > >> >> can access your files on some other PC. > >> >> > >> >> This would be a good time to review your backup policy. > >> >> In a robust installation, important files always reside on at > >> >> least two independent media. > >> >> > >> >> > >> >> > >> > >> > >> > > >
Guest Pegasus \(MVP\) Posted November 12, 2007 Posted November 12, 2007 Re: Win 2000 pro won't boot I answered your question in my very first reply. Which part is it that you find unclear? "canna" <canna@discussions.microsoft.com> wrote in message news:0DA11093-FCF0-4B66-BDE9-DC122798FA51@microsoft.com... > So if I remove the disk from the laptop, how would I make it work on my XP > PC > and how would I get the files? > > Do I need a cable? Won't the error on the disk just appear the same as on > the laptop? > > Sorry about all the questions, i have never done this before as you can > probably tell. > > Thanks for taking the time to respond and your help. > > > "Pegasus (MVP)" wrote: > >> It does not matter what you have at home. What matters >> is that you need a WinXP Professional CD. The emphasis >> is on "CD"! >> >> Manufacturing the Bart PE CD can take you anything >> between half an hour and three hours, depending on you >> level of skill and experience. Removing the disk might >> be a quicker option. >> >> >> "canna" <canna@discussions.microsoft.com> wrote in message >> news:93CB117E-273D-4B58-8822-CD0E69E4E874@microsoft.com... >> > Thanks, I have a XP OEM PC at home. Would the recovery disk from this >> > work? >> > >> > Thanks >> > >> > "Pegasus (MVP)" wrote: >> > >> >> This is incorrect. A Bart PE boot CD requires a WinXP >> >> Professional CD. There should be lots of those around. >> >> >> >> "canna" <canna@discussions.microsoft.com> wrote in message >> >> news:1B79CB20-7A9F-4F1E-979F-F257AE0B2CA9@microsoft.com... >> >> > Thanks for your response. I should have mentioned that it BSOD's >> >> > even >> >> > in >> >> > safe >> >> > mode, infact every option I select from the F8 menu just BSOD's. >> >> > >> >> > BART PE requires a Windows 2000 installation disk which I don't >> >> > have. >> >> > I'm >> >> > currently searching and asking people if they could lend me their >> >> > copy >> >> > but >> >> > not many home users seem to run win 2000. >> >> > >> >> > Is there anything else I could try in the meantime? >> >> > >> >> > Thanks >> >> > >> >> > "Pegasus (MVP)" wrote: >> >> > >> >> >> >> >> >> "canna" <canna@discussions.microsoft.com> wrote in message >> >> >> news:846809D4-8139-40AC-BB7B-9D7BB73CF8C2@microsoft.com... >> >> >> > When the 2000 screen apear the loading bar gets about 3 quarters >> >> >> > across >> >> >> > and >> >> >> > BSOD appears. It mentions about a virus and says run CHDSK /F. >> >> >> > >> >> >> > How can I fix this? I really need the files on the laptop for >> >> >> > work. >> >> >> > I >> >> >> > got >> >> >> > the laptop from a friend but it does not have a 2000 disk with >> >> >> > it. >> >> >> > >> >> >> > I have gone to bootdisk. com and downloaded 4 disks and 2 .exe >> >> >> > files. >> >> >> > These >> >> >> > are currently on my memory stick. The laptop doesn't have a >> >> >> > floppy >> >> >> > drive >> >> >> > do I >> >> >> > need to put these files on a CD? >> >> >> > >> >> >> > Many thanks in advance for your help. >> >> >> > >> >> >> > Canna >> >> >> >> >> >> Here are a few options: >> >> >> - Try booting in Safe Mode, by pressing F8 early during the boot >> >> >> phase. >> >> >> - Boot the machine with a Bart PE boot CD (http://www.bootdisk.com), >> >> >> then copy the files to a flash disk. >> >> >> - Remove the disk, then install it in an external USB case so that >> >> >> you >> >> >> can access your files on some other PC. >> >> >> >> >> >> This would be a good time to review your backup policy. >> >> >> In a robust installation, important files always reside on at >> >> >> least two independent media. >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >>
Recommended Posts