How to install Win2000 on e: after installing XP64 on c:

[Guest Zootal]

I have XP64 installed on my c: partition. I want to install win2000 on my e:

partition, which is a 30GB ntfs partition. I did so, and 3/4 through the

install it locked up. I rebooted, and it was unable to continue the install.

So, I booted back to XP, and much to my surprise, I get a Win2000 could not

start error. My boot.ini seems to be intact. As near as I can tell, the

Win2000 install to e: wiped my XP install on c:. Is this a known issue with

win2000? Was I just lucky (un)? I'm thinking I should install Win2000 first,

then XP.

[Guest Zootal]

Re: How to install Win2000 on e: after installing XP64 on c:

 

Problem solved - Win2000 didn't touch XP, but it *did* overwrite ntldr.

Fortunately, I had a backup copy from my XP install.

 

Panic averted. So, before I break something LOL. Is there any reason I can't

do a Win2000 install to e: after doing an XP install to c:?

 

 

"Zootal" <Don't send me any freaking spam at zootal dot com remove the don't

send me any freaking spam> wrote in message

news:ebK%23zmrOIHA.6060@TK2MSFTNGP05.phx.gbl...

>I have XP64 installed on my c: partition. I want to install win2000 on my

>e: partition, which is a 30GB ntfs partition. I did so, and 3/4 through the

>install it locked up. I rebooted, and it was unable to continue the

>install. So, I booted back to XP, and much to my surprise, I get a Win2000

>could not start error. My boot.ini seems to be intact. As near as I can

>tell, the Win2000 install to e: wiped my XP install on c:. Is this a known

>issue with win2000? Was I just lucky (un)? I'm thinking I should install

>Win2000 first, then XP.

>

[Guest Dave Patrick]

Re: How to install Win2000 on e: after installing XP64 on c:

 

Can you post boot.ini ?

 

--

 

Regards,

 

Dave Patrick ....Please no email replies - reply in newsgroup.

Microsoft Certified Professional

Microsoft MVP [Windows]

http://www.microsoft.com/protect

 

"Zootal" wrote:

>I have XP64 installed on my c: partition. I want to install win2000 on my

>e: partition, which is a 30GB ntfs partition. I did so, and 3/4 through the

>install it locked up. I rebooted, and it was unable to continue the

>install. So, I booted back to XP, and much to my surprise, I get a Win2000

>could not start error. My boot.ini seems to be intact. As near as I can

>tell, the Win2000 install to e: wiped my XP install on c:. Is this a known

>issue with win2000? Was I just lucky (un)? I'm thinking I should install

>Win2000 first, then XP.

>

[Guest Dave Patrick]

Re: How to install Win2000 on e: after installing XP64 on c:

 

How big is the disk? Read these carefully.

 

http://support.microsoft.com/kb/234048

http://support.microsoft.com/kb/305098

 

 

--

 

Regards,

 

Dave Patrick ....Please no email replies - reply in newsgroup.

Microsoft Certified Professional

Microsoft MVP [Windows]

http://www.microsoft.com/protect

 

"Zootal" wrote:

> Problem solved - Win2000 didn't touch XP, but it *did* overwrite ntldr.

> Fortunately, I had a backup copy from my XP install.

>

> Panic averted. So, before I break something LOL. Is there any reason I

> can't do a Win2000 install to e: after doing an XP install to c:?

>

>

> "Zootal" <Don't send me any freaking spam at zootal dot com remove the

> don't send me any freaking spam> wrote in message

> news:ebK%23zmrOIHA.6060@TK2MSFTNGP05.phx.gbl...

>>I have XP64 installed on my c: partition. I want to install win2000 on my

>>e: partition, which is a 30GB ntfs partition. I did so, and 3/4 through

>>the install it locked up. I rebooted, and it was unable to continue the

>>install. So, I booted back to XP, and much to my surprise, I get a Win2000

>>could not start error. My boot.ini seems to be intact. As near as I can

>>tell, the Win2000 install to e: wiped my XP install on c:. Is this a known

>>issue with win2000? Was I just lucky (un)? I'm thinking I should install

>>Win2000 first, then XP.

>>

>

>

[Guest Zootal]

Re: How to install Win2000 on e: after installing XP64 on c:

 

Sorry - I deleted it along with ntldr, and restored them. That fixed the

problem, fortunately.

 

"Dave Patrick" <DSPatrick@nospam.gmail.com> wrote in message

news:Oe$eMtrOIHA.4712@TK2MSFTNGP04.phx.gbl...

> Can you post boot.ini ?

>

> --

>

> Regards,

>

> Dave Patrick ....Please no email replies - reply in newsgroup.

> Microsoft Certified Professional

> Microsoft MVP [Windows]

> http://www.microsoft.com/protect

>

> "Zootal" wrote:

>>I have XP64 installed on my c: partition. I want to install win2000 on my

>>e: partition, which is a 30GB ntfs partition. I did so, and 3/4 through

>>the install it locked up. I rebooted, and it was unable to continue the

>>install. So, I booted back to XP, and much to my surprise, I get a Win2000

>>could not start error. My boot.ini seems to be intact. As near as I can

>>tell, the Win2000 install to e: wiped my XP install on c:. Is this a known

>>issue with win2000? Was I just lucky (un)? I'm thinking I should install

>>Win2000 first, then XP.

>>

>

[Guest Zootal]

Re: How to install Win2000 on e: after installing XP64 on c:

 

I did get it working, but it's not very stable, and it appears there are no

Win2000 drivers for my graphics card - ATI 3850. Plus in order to get XP to

boot, I have to swap out the ntldr file for the xp version. Then to go into

win2000, I have to swap in the Win2k version LOL. This just isn't right. I'm

about to write this off as a bad idea, it's getting to the point where it's

more trouble then it's worth.

 

Any ideas how to get Win2000 to use an ATI 3850? None of the drivers I've

found so far will work - Windows won't install them.

 

"Dave Patrick" <DSPatrick@nospam.gmail.com> wrote in message

news:u9zK8vrOIHA.4440@TK2MSFTNGP06.phx.gbl...

> How big is the disk? Read these carefully.

>

> http://support.microsoft.com/kb/234048

> http://support.microsoft.com/kb/305098

>

>

> --

>

> Regards,

>

> Dave Patrick ....Please no email replies - reply in newsgroup.

> Microsoft Certified Professional

> Microsoft MVP [Windows]

> http://www.microsoft.com/protect

>

> "Zootal" wrote:

>> Problem solved - Win2000 didn't touch XP, but it *did* overwrite ntldr.

>> Fortunately, I had a backup copy from my XP install.

>>

>> Panic averted. So, before I break something LOL. Is there any reason I

>> can't do a Win2000 install to e: after doing an XP install to c:?

>>

>>

>> "Zootal" <Don't send me any freaking spam at zootal dot com remove the

>> don't send me any freaking spam> wrote in message

>> news:ebK%23zmrOIHA.6060@TK2MSFTNGP05.phx.gbl...

>>>I have XP64 installed on my c: partition. I want to install win2000 on my

>>>e: partition, which is a 30GB ntfs partition. I did so, and 3/4 through

>>>the install it locked up. I rebooted, and it was unable to continue the

>>>install. So, I booted back to XP, and much to my surprise, I get a

>>>Win2000 could not start error. My boot.ini seems to be intact. As near as

>>>I can tell, the Win2000 install to e: wiped my XP install on c:. Is this

>>>a known issue with win2000? Was I just lucky (un)? I'm thinking I should

>>>install Win2000 first, then XP.

>>>

>>

>>

>

[Guest Dave Patrick]

Re: How to install Win2000 on e: after installing XP64 on c:

 

You didn't answer. There's no need to swap the older versions of boot sector

files. You're probably out of luck on the driver.

 

 

--

 

Regards,

 

Dave Patrick ....Please no email replies - reply in newsgroup.

Microsoft Certified Professional

Microsoft MVP [Windows]

http://www.microsoft.com/protect

 

"Zootal" wrote:

>I did get it working, but it's not very stable, and it appears there are no

>Win2000 drivers for my graphics card - ATI 3850. Plus in order to get XP to

>boot, I have to swap out the ntldr file for the xp version. Then to go into

>win2000, I have to swap in the Win2k version LOL. This just isn't right.

>I'm about to write this off as a bad idea, it's getting to the point where

>it's more trouble then it's worth.

>

> Any ideas how to get Win2000 to use an ATI 3850? None of the drivers I've

> found so far will work - Windows won't install them.

[Guest Zootal]

Re: How to install Win2000 on e: after installing XP64 on c:

 

Sorry..too many threads...wasn't sure what I was asked. I think you asked

hard drive size. It is 160GB, and my second is 750GB. I installed Win2000 on

a 30GB partition on the 160GB drive, but since it did not span the ~137GB

boundary, it worked find. I had to patch it to SP4 and make the registry

tweak to get it to recognize my bigger partitions, but once I did that it is

working fine.

 

And I discovered that while XP won't work with the ntldr file that Win2000

setup left behind, Win2000 actually does work with the XP version. So, no

swapping ntldr files <whew!>.

 

The only holdup is video drivers. I have a working driver for the onboard

Ati 1250, but it's not very stable and tends to lock up from time to time.

Diamond's website says that the 3850 card supports Win2000, but the disk

that came with the card doesn't have any Win2k drivers on it. And their

online tech support registration has been broken for a month. My warm fuzzy

about Diamond is fading fast. Looks like I make a phone call to them

tomorrow :)

 

 

"Dave Patrick" <DSPatrick@nospam.gmail.com> wrote in message

news:uxHQtMuOIHA.4948@TK2MSFTNGP02.phx.gbl...

> You didn't answer. There's no need to swap the older versions of boot

> sector files. You're probably out of luck on the driver.

>

>

> --

>

> Regards,

>

> Dave Patrick ....Please no email replies - reply in newsgroup.

> Microsoft Certified Professional

> Microsoft MVP [Windows]

> http://www.microsoft.com/protect

>

> "Zootal" wrote:

>>I did get it working, but it's not very stable, and it appears there are

>>no Win2000 drivers for my graphics card - ATI 3850. Plus in order to get

>>XP to boot, I have to swap out the ntldr file for the xp version. Then to

>>go into win2000, I have to swap in the Win2k version LOL. This just isn't

>>right. I'm about to write this off as a bad idea, it's getting to the

>>point where it's more trouble then it's worth.

>>

>> Any ideas how to get Win2000 to use an ATI 3850? None of the drivers I've

>> found so far will work - Windows won't install them.

>