(p5n32-sli SE) coax DD output doesnt work in Vista x64 (software D

[Guest markm75]

I've struggled with this for a while.. and now i think ive narrowed down the

problem...

 

With the Asus P5N32-sli se onboard Realtek audio.. it will not output dolby

digital via the SPDIF via software players like PowerDVD, Windows Media

Player etc on x64 Vista...

 

On this same x64 Vista.. I can goto control panel.. audio.. playback

devices.. the digital audio one.. properties and send Dolby test signals fine

and clear to the receiver.

 

But on the same x64 Vista, if i attempt to use PowerDVD (set to output over

spdif).. it will freeze up.. I also tried WinDVD, it wouldnt freeze, but no

audio was heard.. With Media Player it didnt output any sound Via spdif...

 

I'm at a loss on x64.. as i tried x86 briefly.. the sound coming from

PowerDVD did output Dolby Digital...

 

Anyone happen to have this board.. and has found a way to get Dolby over

spdif under x64 vista?

 

I'm guessing its a limitation of the software under x64, not the hardware or

the realtek drivers?

 

 

Thanks in advance..

[Guest Colin Barnhorst]

Re: (p5n32-sli SE) coax DD output doesnt work in Vista x64 (software D

 

Some of the features of the Realtek driver for Vista x64 may not be enabled

yet. That is the case with a number of drivers. I have a box with a P5N32

SLI SE Deluxe. I had many issues. Be sure your BIOS is at 0704. I do not

use dolby, however.

 

"markm75" <markm75@discussions.microsoft.com> wrote in message

news:4CBF54A1-8F08-440C-BCAD-C25609DDB856@microsoft.com...

> I've struggled with this for a while.. and now i think ive narrowed down

> the

> problem...

>

> With the Asus P5N32-sli se onboard Realtek audio.. it will not output

> dolby

> digital via the SPDIF via software players like PowerDVD, Windows Media

> Player etc on x64 Vista...

>

> On this same x64 Vista.. I can goto control panel.. audio.. playback

> devices.. the digital audio one.. properties and send Dolby test signals

> fine

> and clear to the receiver.

>

> But on the same x64 Vista, if i attempt to use PowerDVD (set to output

> over

> spdif).. it will freeze up.. I also tried WinDVD, it wouldnt freeze, but

> no

> audio was heard.. With Media Player it didnt output any sound Via spdif...

>

> I'm at a loss on x64.. as i tried x86 briefly.. the sound coming from

> PowerDVD did output Dolby Digital...

>

> Anyone happen to have this board.. and has found a way to get Dolby over

> spdif under x64 vista?

>

> I'm guessing its a limitation of the software under x64, not the hardware

> or

> the realtek drivers?

>

>

> Thanks in advance..

>

[Guest markm75]

Re: (p5n32-sli SE) coax DD output doesnt work in Vista x64 (softwa

 

Re: (p5n32-sli SE) coax DD output doesnt work in Vista x64 (softwa

 

 

 

"Colin Barnhorst" wrote:

> Some of the features of the Realtek driver for Vista x64 may not be enabled

> yet. That is the case with a number of drivers. I have a box with a P5N32

> SLI SE Deluxe. I had many issues. Be sure your BIOS is at 0704. I do not

> use dolby, however.

>

 

Yeah thats the latest bios i have.

 

Actually.. when you goto playback devices.. the digital one.. properties..

and do a test on dolby digital.. it works fine there.. just not through ANY

software DVD player that i've tried (tried 3 so far)..

[Guest Carlos]

RE: (p5n32-sli SE) coax DD output doesnt work in Vista x64 (software D

 

Hi,

I'm not a Realtek audio user but I guess you should also set your speaker

output to SPDIF in Realtek's control panel (that icon on systray) so that

both driver and OS are on the same page (or output).

Carlos

 

"markm75" wrote:

> I've struggled with this for a while.. and now i think ive narrowed down the

> problem...

>

> With the Asus P5N32-sli se onboard Realtek audio.. it will not output dolby

> digital via the SPDIF via software players like PowerDVD, Windows Media

> Player etc on x64 Vista...

>

> On this same x64 Vista.. I can goto control panel.. audio.. playback

> devices.. the digital audio one.. properties and send Dolby test signals fine

> and clear to the receiver.

>

> But on the same x64 Vista, if i attempt to use PowerDVD (set to output over

> spdif).. it will freeze up.. I also tried WinDVD, it wouldnt freeze, but no

> audio was heard.. With Media Player it didnt output any sound Via spdif...

>

> I'm at a loss on x64.. as i tried x86 briefly.. the sound coming from

> PowerDVD did output Dolby Digital...

>

> Anyone happen to have this board.. and has found a way to get Dolby over

> spdif under x64 vista?

>

> I'm guessing its a limitation of the software under x64, not the hardware or

> the realtek drivers?

>

>

> Thanks in advance..

>

[Guest markm75]

RE: (p5n32-sli SE) coax DD output doesnt work in Vista x64 (softwa

 

RE: (p5n32-sli SE) coax DD output doesnt work in Vista x64 (softwa

 

 

 

"Carlos" wrote:

> Hi,

> I'm not a Realtek audio user but I guess you should also set your speaker

> output to SPDIF in Realtek's control panel (that icon on systray) so that

> both driver and OS are on the same page (or output).

> Carlos

>

 

 

Actually.. my realtek control panel doesnt have a spdif output option per

say.. it has a speaker config.. but only choices are 2, 4, 6, 8 speakers, no

spdif option.

 

This is the case in both x64 and x86 vista.

[Guest Carlos]

RE: (p5n32-sli SE) coax DD output doesnt work in Vista x64 (softwa

 

RE: (p5n32-sli SE) coax DD output doesnt work in Vista x64 (softwa

 

So you say that you can get SPDIF Dolby output in Vista x86 but not in Vista

x64 in this same PC?

Is Vista x86 Realtek Control Panel different from the x64 version?

Do the release notes of the x64 Realtek drivers say anything about SPDIF

support?

Are you using the latest drivers?

AC97 (not high-def) drivers can be downloaded from here:

http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=23&PFid=23&Level=4&Conn=3&DownTypeID=3&GetDown=false#AC

and they are version 6251

 

High-Definition drivers can be downloaded from here:

http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownTypeID=3&GetDown=false#High Definition Audio Codecs

and they are R1.68

 

Which one you choose will depend on the particular Realtek chipset you have

embedded in your motherboard.

 

I guess your best option might be to check (if they exist) Realtek forums.

The closest thing I found are FAQ's here:

http://www.realtek.com.tw/faqs/faqsFamlist.aspx?Langid=1&PNid=1&PFid=2&Level=2&Conn=1

 

I am a CreativeLabs user and have found solutions to actual problems in

their Vista forums.

 

Best of luck.

Carlos

 

"markm75" wrote:

>

>

> "Carlos" wrote:

>

> > Hi,

> > I'm not a Realtek audio user but I guess you should also set your speaker

> > output to SPDIF in Realtek's control panel (that icon on systray) so that

> > both driver and OS are on the same page (or output).

> > Carlos

> >

>

>

> Actually.. my realtek control panel doesnt have a spdif output option per

> say.. it has a speaker config.. but only choices are 2, 4, 6, 8 speakers, no

> spdif option.

>

> This is the case in both x64 and x86 vista.

>

[Guest Colin Barnhorst]

Re: (p5n32-sli SE) coax DD output doesnt work in Vista x64 (softwa

 

Re: (p5n32-sli SE) coax DD output doesnt work in Vista x64 (softwa

 

I don't think the final feature set is enabled yet.

 

"Carlos" <Carlos@discussions.microsoft.com> wrote in message

news:E8A0646A-C66F-4113-94A2-250FFE4EA107@microsoft.com...

> So you say that you can get SPDIF Dolby output in Vista x86 but not in

> Vista

> x64 in this same PC?

> Is Vista x86 Realtek Control Panel different from the x64 version?

> Do the release notes of the x64 Realtek drivers say anything about SPDIF

> support?

> Are you using the latest drivers?

> AC97 (not high-def) drivers can be downloaded from here:

> http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=23&PFid=23&Level=4&Conn=3&DownTypeID=3&GetDown=false#AC

> and they are version 6251

>

> High-Definition drivers can be downloaded from here:

> http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownTypeID=3&GetDown=false#High

> Definition Audio Codecs

> and they are R1.68

>

> Which one you choose will depend on the particular Realtek chipset you

> have

> embedded in your motherboard.

>

> I guess your best option might be to check (if they exist) Realtek forums.

> The closest thing I found are FAQ's here:

> http://www.realtek.com.tw/faqs/faqsFamlist.aspx?Langid=1&PNid=1&PFid=2&Level=2&Conn=1

>

> I am a CreativeLabs user and have found solutions to actual problems in

> their Vista forums.

>

> Best of luck.

> Carlos

>

> "markm75" wrote:

>

>>

>>

>> "Carlos" wrote:

>>

>> > Hi,

>> > I'm not a Realtek audio user but I guess you should also set your

>> > speaker

>> > output to SPDIF in Realtek's control panel (that icon on systray) so

>> > that

>> > both driver and OS are on the same page (or output).

>> > Carlos

>> >

>>

>>

>> Actually.. my realtek control panel doesnt have a spdif output option per

>> say.. it has a speaker config.. but only choices are 2, 4, 6, 8 speakers,

>> no

>> spdif option.

>>

>> This is the case in both x64 and x86 vista.

>>

[Guest Carlos]

Re: (p5n32-sli SE) coax DD output doesnt work in Vista x64 (softwa

 

Re: (p5n32-sli SE) coax DD output doesnt work in Vista x64 (softwa

 

My guess is the same.

Even CreativeLabs (aka Soundblaster) has no final full-featured drivers

after one year of Vista RTM existence.

They still have no permanent solution for the bass-redirection feature on

some cards.

There were may profound changes in the Vista audio subsystem and it seems

that the audio chipset manufacturers have not been able to catch up, though I

don't excuse them.

Carlos

 

"Colin Barnhorst" wrote:

> I don't think the final feature set is enabled yet.

>

> "Carlos" <Carlos@discussions.microsoft.com> wrote in message

> news:E8A0646A-C66F-4113-94A2-250FFE4EA107@microsoft.com...

> > So you say that you can get SPDIF Dolby output in Vista x86 but not in

> > Vista

> > x64 in this same PC?

> > Is Vista x86 Realtek Control Panel different from the x64 version?

> > Do the release notes of the x64 Realtek drivers say anything about SPDIF

> > support?

> > Are you using the latest drivers?

> > AC97 (not high-def) drivers can be downloaded from here:

> > http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=23&PFid=23&Level=4&Conn=3&DownTypeID=3&GetDown=false#AC

> > and they are version 6251

> >

> > High-Definition drivers can be downloaded from here:

> > http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownTypeID=3&GetDown=false#High

> > Definition Audio Codecs

> > and they are R1.68

> >

> > Which one you choose will depend on the particular Realtek chipset you

> > have

> > embedded in your motherboard.

> >

> > I guess your best option might be to check (if they exist) Realtek forums.

> > The closest thing I found are FAQ's here:

> > http://www.realtek.com.tw/faqs/faqsFamlist.aspx?Langid=1&PNid=1&PFid=2&Level=2&Conn=1

> >

> > I am a CreativeLabs user and have found solutions to actual problems in

> > their Vista forums.

> >

> > Best of luck.

> > Carlos

> >

> > "markm75" wrote:

> >

> >>

> >>

> >> "Carlos" wrote:

> >>

> >> > Hi,

> >> > I'm not a Realtek audio user but I guess you should also set your

> >> > speaker

> >> > output to SPDIF in Realtek's control panel (that icon on systray) so

> >> > that

> >> > both driver and OS are on the same page (or output).

> >> > Carlos

> >> >

> >>

> >>

> >> Actually.. my realtek control panel doesnt have a spdif output option per

> >> say.. it has a speaker config.. but only choices are 2, 4, 6, 8 speakers,

> >> no

> >> spdif option.

> >>

> >> This is the case in both x64 and x86 vista.

> >>

>

[Guest Colin Barnhorst]

Re: (p5n32-sli SE) coax DD output doesnt work in Vista x64 (softwa

 

Re: (p5n32-sli SE) coax DD output doesnt work in Vista x64 (softwa

 

nVidia's 169.25 has comments in the Help file that mention that some of the

nVidia Center options are not enabled in x64 but are "coming real soon now."

 

"Carlos" <Carlos@discussions.microsoft.com> wrote in message

news:20BD19D4-3E60-4672-8DAC-3D60532D9F21@microsoft.com...

> My guess is the same.

> Even CreativeLabs (aka Soundblaster) has no final full-featured drivers

> after one year of Vista RTM existence.

> They still have no permanent solution for the bass-redirection feature on

> some cards.

> There were may profound changes in the Vista audio subsystem and it seems

> that the audio chipset manufacturers have not been able to catch up,

> though I

> don't excuse them.

> Carlos

>

> "Colin Barnhorst" wrote:

>

>> I don't think the final feature set is enabled yet.

>>

>> "Carlos" <Carlos@discussions.microsoft.com> wrote in message

>> news:E8A0646A-C66F-4113-94A2-250FFE4EA107@microsoft.com...

>> > So you say that you can get SPDIF Dolby output in Vista x86 but not in

>> > Vista

>> > x64 in this same PC?

>> > Is Vista x86 Realtek Control Panel different from the x64 version?

>> > Do the release notes of the x64 Realtek drivers say anything about

>> > SPDIF

>> > support?

>> > Are you using the latest drivers?

>> > AC97 (not high-def) drivers can be downloaded from here:

>> > http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=23&PFid=23&Level=4&Conn=3&DownTypeID=3&GetDown=false#AC

>> > and they are version 6251

>> >

>> > High-Definition drivers can be downloaded from here:

>> > http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownTypeID=3&GetDown=false#High

>> > Definition Audio Codecs

>> > and they are R1.68

>> >

>> > Which one you choose will depend on the particular Realtek chipset you

>> > have

>> > embedded in your motherboard.

>> >

>> > I guess your best option might be to check (if they exist) Realtek

>> > forums.

>> > The closest thing I found are FAQ's here:

>> > http://www.realtek.com.tw/faqs/faqsFamlist.aspx?Langid=1&PNid=1&PFid=2&Level=2&Conn=1

>> >

>> > I am a CreativeLabs user and have found solutions to actual problems in

>> > their Vista forums.

>> >

>> > Best of luck.

>> > Carlos

>> >

>> > "markm75" wrote:

>> >

>> >>

>> >>

>> >> "Carlos" wrote:

>> >>

>> >> > Hi,

>> >> > I'm not a Realtek audio user but I guess you should also set your

>> >> > speaker

>> >> > output to SPDIF in Realtek's control panel (that icon on systray) so

>> >> > that

>> >> > both driver and OS are on the same page (or output).

>> >> > Carlos

>> >> >

>> >>

>> >>

>> >> Actually.. my realtek control panel doesnt have a spdif output option

>> >> per

>> >> say.. it has a speaker config.. but only choices are 2, 4, 6, 8

>> >> speakers,

>> >> no

>> >> spdif option.

>> >>

>> >> This is the case in both x64 and x86 vista.

>> >>

>>

[Guest Carlos]

Re: (p5n32-sli SE) coax DD output doesnt work in Vista x64 (softwa

 

Re: (p5n32-sli SE) coax DD output doesnt work in Vista x64 (softwa

 

"Real soon" in NVidia's timescale might be sometime around... let me see...

2011?

:)

Carlos

 

"Colin Barnhorst" wrote:

> nVidia's 169.25 has comments in the Help file that mention that some of the

> nVidia Center options are not enabled in x64 but are "coming real soon now."

>

> "Carlos" <Carlos@discussions.microsoft.com> wrote in message

> news:20BD19D4-3E60-4672-8DAC-3D60532D9F21@microsoft.com...

> > My guess is the same.

> > Even CreativeLabs (aka Soundblaster) has no final full-featured drivers

> > after one year of Vista RTM existence.

> > They still have no permanent solution for the bass-redirection feature on

> > some cards.

> > There were may profound changes in the Vista audio subsystem and it seems

> > that the audio chipset manufacturers have not been able to catch up,

> > though I

> > don't excuse them.

> > Carlos

> >

> > "Colin Barnhorst" wrote:

> >

> >> I don't think the final feature set is enabled yet.

> >>

> >> "Carlos" <Carlos@discussions.microsoft.com> wrote in message

> >> news:E8A0646A-C66F-4113-94A2-250FFE4EA107@microsoft.com...

> >> > So you say that you can get SPDIF Dolby output in Vista x86 but not in

> >> > Vista

> >> > x64 in this same PC?

> >> > Is Vista x86 Realtek Control Panel different from the x64 version?

> >> > Do the release notes of the x64 Realtek drivers say anything about

> >> > SPDIF

> >> > support?

> >> > Are you using the latest drivers?

> >> > AC97 (not high-def) drivers can be downloaded from here:

> >> > http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=23&PFid=23&Level=4&Conn=3&DownTypeID=3&GetDown=false#AC

> >> > and they are version 6251

> >> >

> >> > High-Definition drivers can be downloaded from here:

> >> > http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownTypeID=3&GetDown=false#High

> >> > Definition Audio Codecs

> >> > and they are R1.68

> >> >

> >> > Which one you choose will depend on the particular Realtek chipset you

> >> > have

> >> > embedded in your motherboard.

> >> >

> >> > I guess your best option might be to check (if they exist) Realtek

> >> > forums.

> >> > The closest thing I found are FAQ's here:

> >> > http://www.realtek.com.tw/faqs/faqsFamlist.aspx?Langid=1&PNid=1&PFid=2&Level=2&Conn=1

> >> >

> >> > I am a CreativeLabs user and have found solutions to actual problems in

> >> > their Vista forums.

> >> >

> >> > Best of luck.

> >> > Carlos

> >> >

> >> > "markm75" wrote:

> >> >

> >> >>

> >> >>

> >> >> "Carlos" wrote:

> >> >>

> >> >> > Hi,

> >> >> > I'm not a Realtek audio user but I guess you should also set your

> >> >> > speaker

> >> >> > output to SPDIF in Realtek's control panel (that icon on systray) so

> >> >> > that

> >> >> > both driver and OS are on the same page (or output).

> >> >> > Carlos

> >> >> >

> >> >>

> >> >>

> >> >> Actually.. my realtek control panel doesnt have a spdif output option

> >> >> per

> >> >> say.. it has a speaker config.. but only choices are 2, 4, 6, 8

> >> >> speakers,

> >> >> no

> >> >> spdif option.

> >> >>

> >> >> This is the case in both x64 and x86 vista.

> >> >>

> >>

>