WMI Issue from Remote

[Guest Thorsten Schmitt]

Hi,

 

we use different W2K3 version (x86, IA64, x64), all with current hotfixes

and SPs. Additionl, for remote administration we use SSH and Telnet (ataman)

When I run the following command:

"wmic os get caption"

I receive the correct answer from the OS when I run the command locally.

also, when I perform the command remotely on x86 AND x84 machines I get the

correct answer. BUT:

When I run this command on IA64 remotely (locally NO problem) I receive the

following error message:

ERROR:

Code = 0x80041002

Description = Not found

Facility = WMI

 

Does anybody have an idea, whats wrong here?

 

Thanks and Best Regards,

Thorsten

[Guest Charlie Russel - MVP]

Re: WMI Issue from Remote

 

Thorsten - do you have other WMI issues remotely to that IA64 box? Or is it

just trying to run this particular command? Usually if there's a problem

with remote, but not local, the issue is something in the setup for running

remote WMI commands (firewall, WinRM configuration, etc.) that would show on

all remote WMI commands.

 

(I'm shooting in the dark here, since I don't run IA64 at all, and there

aren't many folks on the NG who do either.)

 

--

Charlie.

http://msmvps.com/xperts64

http://mvp.support.microsoft.com/profile/charlie.russel

 

 

"Thorsten Schmitt" <ThorstenSchmitt@discussions.microsoft.com> wrote in

message news:98F6FEC3-74E0-423B-B0DD-4232C3DA5D35@microsoft.com...

> Hi,

>

> we use different W2K3 version (x86, IA64, x64), all with current hotfixes

> and SPs. Additionl, for remote administration we use SSH and Telnet

> (ataman)

> When I run the following command:

> "wmic os get caption"

> I receive the correct answer from the OS when I run the command locally.

> also, when I perform the command remotely on x86 AND x84 machines I get

> the

> correct answer. BUT:

> When I run this command on IA64 remotely (locally NO problem) I receive

> the

> following error message:

> ERROR:

> Code = 0x80041002

> Description = Not found

> Facility = WMI

>

> Does anybody have an idea, whats wrong here?

>

> Thanks and Best Regards,

> Thorsten

>

[Guest Thorsten Schmitt]

Re: WMI Issue from Remote

 

Hi,

 

I have tried several Commands, others are working. But surely I have not

tried all possible WMI commands ;-)

There is no firewall active, also WRM is not active. This server is almost a

default installation in our company. I also tried to reset the WMI

(wmidiag.vbs) but this did not help.

 

Best Regards,

Thorsten

 

 

"Charlie Russel - MVP" wrote:

> Thorsten - do you have other WMI issues remotely to that IA64 box? Or is it

> just trying to run this particular command? Usually if there's a problem

> with remote, but not local, the issue is something in the setup for running

> remote WMI commands (firewall, WinRM configuration, etc.) that would show on

> all remote WMI commands.

>

> (I'm shooting in the dark here, since I don't run IA64 at all, and there

> aren't many folks on the NG who do either.)

>

> --

> Charlie.

> http://msmvps.com/xperts64

> http://mvp.support.microsoft.com/profile/charlie.russel

>

>

> "Thorsten Schmitt" <ThorstenSchmitt@discussions.microsoft.com> wrote in

> message news:98F6FEC3-74E0-423B-B0DD-4232C3DA5D35@microsoft.com...

> > Hi,

> >

> > we use different W2K3 version (x86, IA64, x64), all with current hotfixes

> > and SPs. Additionl, for remote administration we use SSH and Telnet

> > (ataman)

> > When I run the following command:

> > "wmic os get caption"

> > I receive the correct answer from the OS when I run the command locally.

> > also, when I perform the command remotely on x86 AND x84 machines I get

> > the

> > correct answer. BUT:

> > When I run this command on IA64 remotely (locally NO problem) I receive

> > the

> > following error message:

> > ERROR:

> > Code = 0x80041002

> > Description = Not found

> > Facility = WMI

> >

> > Does anybody have an idea, whats wrong here?

> >

> > Thanks and Best Regards,

> > Thorsten

> >

>