IBM Serveraid 4xl Error

[Guest Thom]

I am installing windows 2000 on a IBM eserver with a IBM Serveraid 4xl card

for the storage system. When I start the install I press F6 that will allow

me to specify a specific driver. I insert the floppy when asked and it

detects the proper driver. I select the driver and then let install proceed.

After a bit it give an error that nfrd960.sys was not found and setup fails.

The nfrd960 file is on the floppy so I can not figure out what is happening.

 

Any ideas would be appreciated, the other option is to install Windows2003

but I can not get the CD drive to read my disk so I was going to attempt an

upgrade to get to 2003, that is the reason for the 2000 install.

[Guest Dave Patrick]

Re: IBM Serveraid 4xl Error

 

You might try recreating the driver disk. Also make sure the driver version

is compatible with the firmware version.

 

http://www-304.ibm.com/systems/support/supportsite.wss/docdisplay?lndocid=SERV-RAID&brandind=5000008

 

http://www-304.ibm.com/systems/support/supportsite.wss/docdisplay?lndocid=MIGR-4QDMES&brandind=5000008

 

 

 

--

 

Regards,

 

Dave Patrick ....Please no email replies - reply in newsgroup.

Microsoft Certified Professional

Microsoft MVP [Windows]

http://www.microsoft.com/protect

 

"Thom" wrote:

>I am installing windows 2000 on a IBM eserver with a IBM Serveraid 4xl card

> for the storage system. When I start the install I press F6 that will

> allow

> me to specify a specific driver. I insert the floppy when asked and it

> detects the proper driver. I select the driver and then let install

> proceed.

> After a bit it give an error that nfrd960.sys was not found and setup

> fails.

> The nfrd960 file is on the floppy so I can not figure out what is

> happening.

>

> Any ideas would be appreciated, the other option is to install Windows2003

> but I can not get the CD drive to read my disk so I was going to attempt

> an

> upgrade to get to 2003, that is the reason for the 2000 install.