Pinging 1394 cable system from Network bridge

[Guest Ravichandran]

I need to make network bridge with 1394 and LAN adapter PC-B

 

 

Traffic flows between A to B on Ethernet and traffic between B to C goes on

1394 interface (Firewire)

 

PC-A contain Ethernet card only.

 

PC-B contains both Ethernet card & 1394 interface card.

 

PC-C contains 1394 interface card only.

 

I am able to ping either PC-A to B (Ethernet card)

 

I am able to ping either PC-B to C (1394 interface)

 

I am unable to ping either from B to C (1394 interface) or vice versa after

making the network bridge.

 

 

Do I need to make any changes in Network Bridge after creating it.

 

I have already installed 1394 drivers in PC-C, because 1394 net adapter is

not enabled in Device manager.

 

Network Bridge display under the Network adapters as “MAC miniport” in

device manager.

 

1394 and Ethernet adapter also displaying in device manager under the

Network adapters

 

 

OS: Windows XP with SP2.

 

Firewall: Off mode.

[Guest Charlie Russel - MVP]

Re: Pinging 1394 cable system from Network bridge

 

This is a newsgroup for 64-bit, which I don't believe you're running. But

I've got some experience with bridging to 1394, and the problem is that the

default mode won't bridge. You need to enable promiscuous mode for the 1394

adapter. Do a google and you should find it. Key word is "promiscuous",

search on site:microsoft.com

 

--

Charlie.

http://msmvps.com/blogs/xperts64

http://mvp.support.microsoft.com/profile/charlie.russel

 

 

"Ravichandran" <Ravichandran@discussions.microsoft.com> wrote in message

news:20C48340-0BFD-46F0-A045-D1ECEC28184F@microsoft.com...

>I need to make network bridge with 1394 and LAN adapter PC-B

>

>

> Traffic flows between A to B on Ethernet and traffic between B to C goes

> on

> 1394 interface (Firewire)

>

> PC-A contain Ethernet card only.

>

> PC-B contains both Ethernet card & 1394 interface card.

>

> PC-C contains 1394 interface card only.

>

> I am able to ping either PC-A to B (Ethernet card)

>

> I am able to ping either PC-B to C (1394 interface)

>

> I am unable to ping either from B to C (1394 interface) or vice versa

> after

> making the network bridge.

>

>

> Do I need to make any changes in Network Bridge after creating it.

>

> I have already installed 1394 drivers in PC-C, because 1394 net adapter is

> not enabled in Device manager.

>

> Network Bridge display under the Network adapters as “MAC miniport” in

> device manager.

>

> 1394 and Ethernet adapter also displaying in device manager under the

> Network adapters

>

>

> OS: Windows XP with SP2.

>

> Firewall: Off mode.

>

[Guest Tom Ferguson]

Re: Pinging 1394 cable system from Network bridge

 

I had reason to check this recently:

http://support.microsoft.com/kb/302348/

 

"Charlie Russel - MVP" <charlie@mvKILLALLSPAMMERSps.org> wrote in message

news:01610958-9657-4CA9-BD84-4F7EDFD94F4F@microsoft.com...

> This is a newsgroup for 64-bit, which I don't believe you're running. But

> I've got some experience with bridging to 1394, and the problem is that

> the default mode won't bridge. You need to enable promiscuous mode for the

> 1394 adapter. Do a google and you should find it. Key word is

> "promiscuous", search on site:microsoft.com

>

> --

> Charlie.

> http://msmvps.com/blogs/xperts64

> http://mvp.support.microsoft.com/profile/charlie.russel

>

>

> "Ravichandran" <Ravichandran@discussions.microsoft.com> wrote in message

> news:20C48340-0BFD-46F0-A045-D1ECEC28184F@microsoft.com...

>>I need to make network bridge with 1394 and LAN adapter PC-B

>>

>>

>> Traffic flows between A to B on Ethernet and traffic between B to C goes

>> on

>> 1394 interface (Firewire)

>>

>> PC-A contain Ethernet card only.

>>

>> PC-B contains both Ethernet card & 1394 interface card.

>>

>> PC-C contains 1394 interface card only.

>>

>> I am able to ping either PC-A to B (Ethernet card)

>>

>> I am able to ping either PC-B to C (1394 interface)

>>

>> I am unable to ping either from B to C (1394 interface) or vice versa

>> after

>> making the network bridge.

>>

>>

>> Do I need to make any changes in Network Bridge after creating it.

>>

>> I have already installed 1394 drivers in PC-C, because 1394 net adapter

>> is

>> not enabled in Device manager.

>>

>> Network Bridge display under the Network adapters as “MAC miniport” in

>> device manager.

>>

>> 1394 and Ethernet adapter also displaying in device manager under the

>> Network adapters

>>

>>

>> OS: Windows XP with SP2.

>>

>> Firewall: Off mode.

>>

>

[Guest Ravichandran]

Re: Pinging 1394 cable system from Network bridge

 

Hi,

Thanks.

The ethernet and 1394 adapter are enabled for "compactmode".

 

"Tom Ferguson" wrote:

> I had reason to check this recently:

> http://support.microsoft.com/kb/302348/

>

> "Charlie Russel - MVP" <charlie@mvKILLALLSPAMMERSps.org> wrote in message

> news:01610958-9657-4CA9-BD84-4F7EDFD94F4F@microsoft.com...

> > This is a newsgroup for 64-bit, which I don't believe you're running. But

> > I've got some experience with bridging to 1394, and the problem is that

> > the default mode won't bridge. You need to enable promiscuous mode for the

> > 1394 adapter. Do a google and you should find it. Key word is

> > "promiscuous", search on site:microsoft.com

> >

> > --

> > Charlie.

> > http://msmvps.com/blogs/xperts64

> > http://mvp.support.microsoft.com/profile/charlie.russel

> >

> >

> > "Ravichandran" <Ravichandran@discussions.microsoft.com> wrote in message

> > news:20C48340-0BFD-46F0-A045-D1ECEC28184F@microsoft.com...

> >>I need to make network bridge with 1394 and LAN adapter PC-B

> >>

> >>

> >> Traffic flows between A to B on Ethernet and traffic between B to C goes

> >> on

> >> 1394 interface (Firewire)

> >>

> >> PC-A contain Ethernet card only.

> >>

> >> PC-B contains both Ethernet card & 1394 interface card.

> >>

> >> PC-C contains 1394 interface card only.

> >>

> >> I am able to ping either PC-A to B (Ethernet card)

> >>

> >> I am able to ping either PC-B to C (1394 interface)

> >>

> >> I am unable to ping either from B to C (1394 interface) or vice versa

> >> after

> >> making the network bridge.

> >>

> >>

> >> Do I need to make any changes in Network Bridge after creating it.

> >>

> >> I have already installed 1394 drivers in PC-C, because 1394 net adapter

> >> is

> >> not enabled in Device manager.

> >>

> >> Network Bridge display under the Network adapters as “MAC miniport” in

> >> device manager.

> >>

> >> 1394 and Ethernet adapter also displaying in device manager under the

> >> Network adapters

> >>

> >>

> >> OS: Windows XP with SP2.

> >>

> >> Firewall: Off mode.

> >>

> >

>

>