Changing motherboards, now Win2000 CD won't boot for installation

[Guest jbclem]

I've switched from a real old, Asus P2B, motherboard to a slightly newer one, Asus P4PE. My Win2000 CD, which has

worked many times in the past, now when I try to boot up to install Win2000, will go through the first screen that lists

all the components and then stop with these words: Boot from Atapi CD-ROM: no emulation.

 

I can boot up in DOS using the Hirens CD. And I've tried to install Win2000 via DOS, and I can get partway through the

installation, but when the installation starts copying all the files onto the hard drive...some of them won't copy and

so I can't get a good installation. I've checked this Win2000 CD on my other computer and it will go through the

installation without this bad files problem.

 

I need some help with this "no emulation" message, how to get this installation to proceed. Any suggestions?

 

John

[Guest DL]

Re: Changing motherboards, now Win2000 CD won't boot for installation

 

What do you mean 'lists all the components' when booting from the win2k cd

you should only receive a msg ' 'install win2k'

http://support.microsoft.com/default.aspx?scid=kb;en-us;824125

http://support.microsoft.com/default.aspx?scid=kb;en-us;304868

 

 

"jbclem" <jbclem1@charter.net> wrote in message

news:vSTWj.63$DX4.14@newsfe02.lga...

> I've switched from a real old, Asus P2B, motherboard to a slightly newer

> one, Asus P4PE. My Win2000 CD, which has

> worked many times in the past, now when I try to boot up to install

> Win2000, will go through the first screen that lists

> all the components and then stop with these words: Boot from Atapi

> CD-ROM: no emulation.

>

> I can boot up in DOS using the Hirens CD. And I've tried to install

> Win2000 via DOS, and I can get partway through the

> installation, but when the installation starts copying all the files onto

> the hard drive...some of them won't copy and

> so I can't get a good installation. I've checked this Win2000 CD on my

> other computer and it will go through the

> installation without this bad files problem.

>

> I need some help with this "no emulation" message, how to get this

> installation to proceed. Any suggestions?

>

> John

>

>

[Guest philo]

Re: Changing motherboards, now Win2000 CD won't boot for installation

 

 

"jbclem" <jbclem1@charter.net> wrote in message

news:vSTWj.63$DX4.14@newsfe02.lga...

> I've switched from a real old, Asus P2B, motherboard to a slightly newer

one, Asus P4PE. My Win2000 CD, which has

> worked many times in the past, now when I try to boot up to install

Win2000, will go through the first screen that lists

> all the components and then stop with these words: Boot from Atapi

CD-ROM: no emulation.

>

> I can boot up in DOS using the Hirens CD. And I've tried to install

Win2000 via DOS, and I can get partway through the

> installation, but when the installation starts copying all the files onto

the hard drive...some of them won't copy and

> so I can't get a good installation. I've checked this Win2000 CD on my

other computer and it will go through the

> installation without this bad files problem.

>

> I need some help with this "no emulation" message, how to get this

installation to proceed. Any suggestions?

>

> John

>

>

 

Normally one would just set the bios to boot from cd

or else create a set up floppies to begin the cd installation.

 

Though win2k can be installed from dos,

you need to fist load smartdrv . also the partition must be fat32;

you can convert to NTFS once win2k is installed

[Guest Andy]

Re: Changing motherboards, now Win2000 CD won't boot for installation

 

On Thu, 15 May 2008 03:01:53 -0700, "jbclem" <jbclem1@charter.net>

wrote:

>I've switched from a real old, Asus P2B, motherboard to a slightly newer one, Asus P4PE. My Win2000 CD, which has

>worked many times in the past, now when I try to boot up to install Win2000, will go through the first screen that lists

>all the components and then stop with these words: Boot from Atapi CD-ROM: no emulation.

>

>I can boot up in DOS using the Hirens CD. And I've tried to install Win2000 via DOS, and I can get partway through the

>installation, but when the installation starts copying all the files onto the hard drive...some of them won't copy and

>so I can't get a good installation. I've checked this Win2000 CD on my other computer and it will go through the

>installation without this bad files problem.

>

>I need some help with this "no emulation" message, how to get this installation to proceed. Any suggestions?

>

>John

>

Try testing the motherboard system memory. If it passes, then the new

motherboard has problems reading from the old CD drive.

[Guest jbclem]

Re: Changing motherboards, now Win2000 CD won't boot for installation

 

I did test the memory from the Hirens CD. It passed ok. And since the motherboard had no problems with the CD-ROM when

it booted from the Hirens CD into DOS, I'd assume at least something was working correctly between the two. But the

Win2000 CD won't even start to boot up, so there must be a difference between these two CD's, something that isn't being

recognized by the motherboard. That's what I'm trying to find out...what is this "no emulation" message and how can I

find out why one CD is being recognized but not the other.

 

John

 

 

"Andy" <1@2.3> wrote in message news:9k1q24lvef7f4mv0m6gienhclhorl8q5q5@4ax.com...

> On Thu, 15 May 2008 03:01:53 -0700, "jbclem" <jbclem1@charter.net>

> wrote:

>

> >I've switched from a real old, Asus P2B, motherboard to a slightly newer one, Asus P4PE. My Win2000 CD, which has

> >worked many times in the past, now when I try to boot up to install Win2000, will go through the first screen that

lists

> >all the components and then stop with these words: Boot from Atapi CD-ROM: no emulation.

> >

> >I can boot up in DOS using the Hirens CD. And I've tried to install Win2000 via DOS, and I can get partway through

the

> >installation, but when the installation starts copying all the files onto the hard drive...some of them won't copy

and

> >so I can't get a good installation. I've checked this Win2000 CD on my other computer and it will go through the

> >installation without this bad files problem.

> >

> >I need some help with this "no emulation" message, how to get this installation to proceed. Any suggestions?

> >

> >John

> >

> Try testing the motherboard system memory. If it passes, then the new

> motherboard has problems reading from the old CD drive.

[Guest PA20Pilot]

Re: Changing motherboards, now Win2000 CD won't boot for installation

 

Hi,

 

Try the following link.

 

http://www.google.com/search?hl=en&as_q=&as_epq=no+emulation&as_oq=&as_eq=&num=10&lr=&as_filetype=&ft=i&as_sitesearch=&as_qdr=all&as_rights=&as_occt=any&cr=&as_nlo=&as_nhi=&safe=images

 

 

---==X={}=X==---

 

Jim Self

 

AVIATION ANIMATION, the internet's largest depository.

http://avanimation.avsupport.com

 

Your only internet source for spiral staircase plans.

http://jself.com/stair/Stair.htm

 

Experimental Aircraft Association #140897

EAA Technical Counselor #4562