Legacy Operating Systems

Yesterday, I installed Windows Xp and in a "partition dialog" in setup it has been displayed : C:\ size(238M)/used(115M). After that, the installation format my disk, but only in not used space (size - used). So after installation, on absolutely empty computer (only the programs and drivers installed with Windows) in the Properties of C: there are : used space 115M, Capacity 238M. What can I do?

Nike Air Jordan 1 I Force 1 Jordan Fusion AJF 1 AJF1 AJ1F Jordan 1 fusion http://www.wholejean.cn Nike Air Jordan 2 II Force 1 Jordan Fusion AJF 2 AJF2 AJ2F Jordan 2 fusion Nike Air Jordan 3 III Force 1 Jordan Fusion AJF 3 AJF3 AJ3F Jordan 3 fusion Nike Air Jordan 4 IV Force 1 Jordan Fusion AJF 4 AJF4 AJ4F Jordan 4 fusion Nike Air Jordan 5 V Force 1 Jordan Fusion AJF 5 AJF5 AJ5F Jordan 5 fusion Nike Air Jordan 6 VI Force 1 Jordan Fusion AJF 6 AJF6 AJ6F Jordan 6 Rings Jordan 6 fusion Nike Air Jordan 7 VII Force 1 Jordan Fusion AJF 7 AJF7 AJ7F Jordan 7 fusion Nike Air Jordan 8 VIII Force 1 Jordan 8 Fusion AJF 8 AJF8 AJ8F Jordan 8 fusion Nike Air Jordan 9 IX…

What are the possible consequences of manually removing the following type of registry key: hkey_local_machine \software\microsoft\windows\currentversion\internet settings\zonemap\domains\ (website) If my understanding is correct, the values of this key will set the security/privacy settings of the IE browser for the specified website. For the case of malware, the malware would create this key and set the security level to "Trusted" for the website. It would then direct the browser to the website and run more malicious code from that site. Using REGEDIT, I looked to see how many keys I had of this type and found a huge amount. I estimate about 500. N…

What obviously seemed like a simple task has turned into an issue. TS Web is installed and is functioning just fine. Since the default installation is a sub folder in the default web site, I am trying to do a redirect so users don't have to add the "/ts" when they type a url. I'd be much appreciated if anyone has any ideas why I can't this to work. thanks, Brian

Help plz, New install of server 2003 with sp2. when trying to install admin pack i get "this can only be installed on a Win XP with Q329357 or server 2003" and closes. It is a Windows server 2003?????????? Why is this happening, I have re-downloaded admin pack but same again. Ta Adam

I am doing reserch on this because people are asking to set this to all the servers in our domain. There were a number of Internet articles that state the default for this setting is 15 minutes. I also have seen other internet articles suggesting that you set this to 15 minutes. Do Windows servers, by default, have this already configured or are the articles suggesting the policy should be set to 15 mins?

The other night I accidentialy was hit with the XP Antivirus as well as some form of software which turned off my firewall and is now blocking certian websites on my IE explorer which is not allowings me to certian software download sites like Mcfee, CA, MSN XP support, and most of the recomended spyware and virus removal programs. I also notice when I do a serach in explorere, the links are fake and they open another window. At the same time my desktop changed to a Large Windows warning message indicating Spyware detected on your computer. Warning Win32/adware.Virtumonde and Win32/privacyremover.M64 I also have lost the ability of screen saver and …

I have a webpage that was created for me that contains animation. I want to transfer this webpage to my website files on the internet. I have this file stored on my computer in the MY Documents section. Everytime I open this file on my computer the animation is blocked and I have to right click the script and active x warning bar that pops up and click allow. I need to transfer this file to my website files, but when I do, the animation does not come with it. How can I stop internet explorer from blocking the animation so that I can transfer the COMPLETE file to my website files? The animation company made the program on a MAC if that will help you. …

'*Payday Loans*' (http://paydayloancourse.com): *'Payday loans' (http://paydayloancourse.com/map.html)* and *'*No Fax Payday loan' (http://no-fax-payday-loan.paydayloancourse.com/map.html) are available for people nationwide. All applications are accepted with quick payday loan approvals! Do you need 'quick payday loan' (http://quick-payday-loan.paydayloancourse.com/map.html) to pay a bill or cover an unexpected expense? Check out PayDay OK! We offer guaranteed low rates and top-notch service. Our customers agree - they recently gave us a 96% customer satisfaction rating! Easy 'Online Pay Day Loans' (http://online-pay-day-loans.paydayloancourse.com/map…

Hello! I have a Win 2000 terminal server that I locked down a couple of years ago using the "Locking Down Windows Server 2003 Terminal Server Sessions" document. It is a member server in an SBS 2003 domain, with the GPO being on the SBS 2003 server and applied to a "Terminal Servers" OU that has only the TS in it. I had it set so that users could see only the All Users desktop and had their own Star Menu where they could have icons specific to particular users. Now I want them to be able to have their own desktop as well as the All Users desktop because some users want the ability to create shortcuts on the TS desktop to frequently used files that re…

I was wondering if anyone could help me with this. I tried this question in the WMP forum and got 0 replies. I'm using WMP11 to display a slide show of jpg files. I can get to the area where there is a play speed slider and buttons to change the presentation speed, but nothing I do has any effect. The slider arrow only appears when I click on the Slow, Normal, Fast buttons. I can then move the arrow but it doesn't stay where I put it and then it disappears. And the Slow, Normal, Fast buttons also have no effect on the slide display speed. The jpg's always display with about 4-5 seconds interval, no matter what I try. Also, if you don't click on S…

http://support.microsoft.com/kb/325376/en-us?spid=3198&sid=1191 If verbose logging is not enabled, you will still receive normal status messages such as "Applying your personal settings..." or "Applying computer settings..." when you start up, shut down, log on, or log off the computer. However, if verbose logging is enabled, you will receive additional information, such as "RPCSS is starting" or "Waiting for machine group policies to finish...." ------- I changed the registry as instructed but nothing changed. I still see nothing but "applying computer settings" (for hours at a time, meaning my server is completely dead in the water)

Windows could not start because the following file is missing or corrupt C:\windows\system32\config\system Switched on my 2nd PC tonight and got a black dos screen :- Windows could not start because the following file is missing or corrupt C:\windows\system32\config\system ....rather than wade through http://support.microsoft.com/kb/307545 I've just booted from Norton Ghost cd and am now restoring a Norton Ghost *.v2i full hd backup taken 13-08-2008, from 2nd hd (in same the machine), and its' now 58% into "Copying volume data over existing volume" This PC has been as solid as a rock for many weeks, ...nay ...several months ! Any ideas as to what…

Is there a list of only the basic files need on startup? How do I turn off those I don't need so they don't interfere with what i am working on in XP? thanks

I have a Dell Dimension 8200 with XP SP2, with DSL connection. I have AVG antivirus free version 7.5, Comodo firewall, Spyware Blaster and Hive Cleanup. All of these have run well together and I have had no problems. Today I updated AVG which I do on a regular basis and it ran successfully however afterwards it said that there was another update so I ran it again but this time it failed. I tried running it several times with the same result. The last time it did somethig like this it gave me a missing bin file error code but this time all it says was connection with update server failed. It turned out that the the problem was on the AVG side and I didn't have to…

Xp pro (SP-3 and all current updates) I've noticed an odd bug in my laptop. Wordpad displays blank boxes forfilename text in dialog boxes. Someone gave me a fi earlier but I lost it. What was that fix?

The original configuration was AMD Phenom9600, Asus M3A motherboard, Asus EN8500GT (Nvidia PCI-E), 4x1GB PC800 ram. Vista Enterprise x64 installed without any problems, sleep mode would cause a video lockup and there were intermittent video restarts. Changed the video card to an Asus EAH2600XT (ATI PCI-E) video problems were still the same. Changed the motherboard to an Asus M3N78-Pro, 4x2GB ram, Vista Enterprise x64 installed without any problems, with either video card the same video problems and sleep problems were present. Removed the video card to try the onboard video (Nvidia GF8300) all video and sleep problems were gone. Initial testing on the or…

hi mandatory profiles and roaming profiles they work only in domain environments or they can be used in workgroup networks ?

My Symantec detect this file in Windows\system32 directory but it could not delete it. I tried to manually delete it but it still does not work. Any ideas? Thx, Andy

Hiya, How do you run Terminal Services Configuration (tscc.msc) on XP? I've tried installing adminpak.exe from the Windows 2003 setup disks. tscc is not in adminpak. So I've tried copying the files from a 2003 computer to the XP box. Tho when I run tscc.msc from XP after copying it says "MMC could not create the snap-in." So whats the right way to run the console, eh? ChrisW

We are looking at putting in Exchange 2007 on a Windows Standard 2008 box. The existing environment is a Win2k domain with some Win2003 servers. We know the environment needs to be upgraded, however, I have had no luck finding the requirements for putting a 2008 box in an existing domain. Most information I found discusses deployment in a new 2008 domain. I have found the requirements for exchange in an existing domain. Can anyone point me to resources with information on 2008? I called MS pre-sales after much searching myself and all they could offer is they thought the domain had to be 2008. Can someone confirm if this is the case or, if it…

I have a Dell Dimension. The WinXP "Recovery Disk" for this computer is on the same disk as the working WinXP but at a different partition. If the Hard Disk crashes, I have no way to reinstall the WinXP back to a new Hard Disk. My question is Is there a way to copy the "Recovery Disk" from its partition to an external CD and make this CD bootable so that should anything happen to the existing Hard Disk, I can reinstall the WinXP from the CD back to a new Hard Disk? If possible, I would like to use whatever tools there are in the WinXP. I don't want to have to buy some fancy third party programs. Thanks in advance Charles.

Really generic question. can you change just the taskbar color? without changing the windows color? thanks

unable to logon. did not forget PW. sometimes I can retype PW 50+ times and then it will logon. but somedays NO. any hints? thanx

I'm running Windows XP. Within the last week, every time I double-click on a JPG image file in Windows Explorer (or type its name on the command line), I get: Open File - Security Warning Do you want to open this file? ... [Open] [Cancel] [x] Always ask before opening this file While files from the Internet can be useful, this file type can potentially harm your computer.... I can un-check the "Always ask" box, and then it doesn't prompt me any more for that particular image, but it still prompts for other JPG images. Can anyone explain why I am suddenly getting this prompt? Could it be that recently I installed Firefox 3.0? How can I…