Legacy Operating Systems

I have a small Win2k3 TS server setup as a member of a Win2k3 domain. The existing domain controller will be decommissioned and a new DC, with a new domain name, will be installed. What is the best way to handle the migration of the TS to the new domain? Just removing it from the first domain and adding it to the new domain seems to simple. I'm worried about user profiles, etc. Can anyone advise on best practices? Thanks, Joe

I am in the proccess of setting up a NAS on our network to use as a read only archive of older project files. I was looking for the best way to acomplish this. I have looked at robocopy and it seems like it may do the job. Does it maintain the directory structure and can it delete the source files after a successfuly copy? Are there any other products out there I could look into. Thanks in advance for any help. Paul

I have installed QuickTime 7.4.5 on Terminal Server 2003. Ran it in install mode, chose not to auto update. However, as tested by a user, when they went to Apple.com they were presented with the decision to update. I'm looking for a way to avoid a user being able to select "update". Any advice is appreciated. Thank you. -- rmth

DOES ANY KNOWS HOW TO RETYPE A PASSWORD FOR ACTIVESYNC? IT KEEPS POPPING UP FOR A PASSWORD. I DID NOT USE ACTIVESYNC FOR A WHILE AND FORGOT MY PASSWORD. PLS HELP I LIKE TO USE THIS FROM NOW ON. THANKS FOR ANY HELP.

Hi, I am trying to open a webpage, but am unable I get the following problem on this computer, I can access the page by another computer, I have disabled the virus checker and the fire wall but still cannot open it. your help is appreciated Though the site seems valid, the browser was unable to establish a connection. * Could the site be temporarily unavailable? Try again later. * Are you unable to browse other sites? Check the computer's network connection. * Is your computer or network protected by a firewall or proxy? Incorrect settings can interfere with Web browsing. Thanks Bob

Hi I would appreciate some advice on the following: I would like to turn off the Write cache setting on my harddrive, but am unable to do this through Device manager as this causes a Delayed Write error when I try to launch the applet. The settings on the Policies tab for the drive are "greyed" out. According to my current research in this group and generally on the Internet, I understand that I need to change the setting in the registry: HKEY_LOCAL_MACHINE\System\CurrentControlSet \Services\Lanman server\Parameters What I am not sure about is which option in this key needs to be set to 0. Is it the default? I am running Win Xp Home SP3. Thanks Heather

Enterprise 2008 SP1 I created a batch file, but unable to execute (by clicking) and it force the batch file open in notepad. How can i run a batch file ?

I have a Compaq Prosignia 165 laptop. It was designed for Windows 98, so I assume it was built in 98 to 00. I finally found an online manual for it. It has a thing on the rear that is called an infrared module. It fails to explain what it's for. Can someone please tell me the purpose to this thing. Thanks

was on another forum and saw this My laptop (HP Compaq) is showing a black screen that says roughly that I should back up my data because the hard disk 2 maybe failing never had a h-d fail. do they give warning before they do crash? there was no answer on the other forum. thanks

dvi kabel guenstig hdmi kabels 1080p ps3 hdmi hdmi opalog hdmi controle + + + +++ BILLIGE HDMI KABEL KAUFEN +++ BILLIGE DVI KABEL KAUFEN +++ + + http://HDMI-KABEL.BUYONLINE24.INFO http://HDMI-KABEL.BUYONLINE24.INFO http://HDMI-KABEL.BUYONLINE24.INFO http://HDMI-KABEL.BUYONLINE24.INFO http://HDMI-KABEL.BUYONLINE24.INFO http://HDMI-KABEL.BUYONLINE24.INFO http://HDMI-KABEL.BUYONLINE24.INFO http://HDMI-KABEL.BUYONLINE24.INFO + + + http://groups.google.de/group/supply-kind-of-hdmi-cable/web/hdmi-kabel-guenstig http://kinder-puppen.mirror-server.net - Kinder Puppen http://holz-autos.mirror-server.net - Holz Autos …

The lower menu bar including where the start button is keeps "hanging" itself so that I can't access it. Normally it works when the computer starts but after having used a program or two it stops been accessable. It started a week ago, no installations were made, it just came it out of the blue. Any idea why and what I can do to fix it?

Hi all, I am using Excel 2003 for some project. I am having 2GB C drive harddisk space. After a while, the Excel begins to be extremely slow in copy and paste... It takes about half an hour to copy and paste just a few cells... I've consulted people. It seems a memory problem. But I cannot close my windows and kill the processes, because I am running long-running (overnight) jobs... I cannot reboot either. Is there a way to clean the memory and let Excel 2003 clipboard function properly without rebooting or killing my 4 long-running processes? Thanks!

dvi verlaengerung hdmi kabels voor playstation 3 af 9400pvr hdmi hdmi kabels 7 5m hdmi kabel ver 1.3 dvi verlaengerung hdmi kabels voor playstation 3 af 9400pvr hdmi hdmi kabels 7 5m hdmi kabel ver 1.3 + + + +++ BILLIGE HDMI KABEL KAUFEN +++ BILLIGE DVI KABEL KAUFEN +++ + + http://HDMI-KABEL.BUYONLINE24.INFO http://HDMI-KABEL.BUYONLINE24.INFO http://HDMI-KABEL.BUYONLINE24.INFO http://HDMI-KABEL.BUYONLINE24.INFO http://HDMI-KABEL.BUYONLINE24.INFO http://HDMI-KABEL.BUYONLINE24.INFO http://HDMI-KABEL.BUYONLINE24.INFO http://HDMI-KABEL.BUYONLINE24.INFO + + + http://www.salsapresse.com/modules.php?name=Forums&file=viewtopic…

VirtualBox 1.6.4 | Utilities InnoTek VirtualBox is a family of powerful x86 virtualization products for enterprise as well as home use. Targeted at server, desktop and embedded use, it is now the only professional-quality virtualization solution that is also Open Source Software. Some of the features of VirtualBox are: * Modularity. VirtualBox has an extremely modular design with well- defined internal programming interfaces and a client/server design. This makes it easy to control it from several interfaces at once: for example, you can start a virtual machine in a typical virtual machine GUI and then control that machine from the command line, or p…

OK, I can't believe it, but I finally have Win98SE installed and running / looking exactly the way I want. Now, before I mess something up, I'd like to make a ???? of the whole thing so that if I, or something else, throws a monkey wrench in the works, I can just Reformat C:\, copy this ???? to C:\, reboot and all is just as it was when I created the ????. Sorry for the ????'s, but I am a little confused about what you call the ???? I'm after. Lots of threads - lots of conflicting use of the various terms and terminology. I have used Win98SE's native Backup facility to back up C:\, but I assume this only backed up the data, and not the System info. I do …

I have a Dell laptop that had Widows XP on it. It is out of warranty with Dell and I won't pay for fee based help. Dell did not give me a copy of XP or any type of recovery discs when I bought the laptop even though I paid for a license for the copy of XP that came on it which I think is rediculous. Anyway the hard drive failed and I replaced it. I built a desktop and installed XP Home on it awhile back. Does anyone know if I can use that disk to install XP on the laptop but use the product key for the copy that came on the Dell? A friend told my that he thinks that the product key is the license and any XP disk can be used for the installation. I emailed …

when I install BBC Newsticker I get big white board on PC and am forced to uninstall. Please suggest remedy. Thanks.

I tried to install a SDHC card reader/writer (Targus TGR-SD20) on my w98se. The instructions state that the driver download software is w98 and ME compatible. It installed but does not open. This is my first venture into the land of SD cards so I have no idea as to the problem. Any help would be greatly appreciated.

I have recently installed a new HDD and new DVD Rom drive. I installed a copy of XP Professional I receiced from Dell and then attempted to re install all the programs I had pre HDD failure. I seem to be having problems when I re install IE7 (which I am positive I had pre HDD failure). When I install I and then reboot I get a boot error saying a file call hal.dll is corrupt or missing. This is a very similar error to the one I got when my HDD failed except the file name was ntfskrnl.dll (I think). When this happens I have to re install XP and exverything works if I don't re install IE7. I would like to use IE7, but not sure how to resolve this is…

Re: BioStar Motherboard eaten my RAM ???!! Hari Hari Mau wrote in news:6d7b57ee-290d-43b5-a5e4-91f124521cdb@n38g2000prl.googlegroups.com: > On Aug 13, 4:08 pm, Conor <conor_tur...@hotmail.com> wrote: >> In article <c9b44d15-81e3-4940-837e-8a91e6d92800 >> @v26g2000prm.googlegroups.com>, Hari Hari Mau says... >> >> > Hello all ! >> >> > Just recently I upgraded my PC to 4GB of DDR2 RAM --- 2 X 2GB DDR2 RAM >> > Modules. >> >> > But when I plugged in the memory modules and powered up my PC, I got >> > an unpleasant surprise !! >> >> > Somehow the 4GB of…

I know in the past it was strongly recommended to reboot Windows Server. However, with Windows 2003, is it still recommended? And if so, how often is it recommended? Thanks alot for any help. -- sseubert ------------------------------------------------------------------------ sseubert's Profile: http://forums.techarena.in/members/sseubert.htm View this thread: http://forums.techarena.in/windows-server-help/1020572.htm http://forums.techarena.in

My speakers are fine and I can hear mp3's but no sound on any web pages. What should i do?

I have troubles with these 2 windows xp application. If i try to use Scandisk in the phase 1 it arrive at 65 % then my PC will be freezed and i need to switch of and reboot. If i try to defrag the HD when i click on the Defrag button my PC always automaticly reboot. May someone help me?

I am setting up two server HP DL380 G5 to hold file server role using windows server 2003 R3. I can successfully setup FSRM, but when I tried to apply quota and screening, it returned with an error "An unexpected error has occurred. Plese check the application events log for more information" I check edon the event viewer and there were two events: Event Type: Error Event Source: FSRM Event Category: None Event ID: 0 Date: 8/12/2008 Time: 5:54:46 PM User: N/A Computer: SO-HCM-FILE-01 Description: An unexpected error occurred in the File Server Resource Manager MMC snap-in at Microsoft.Storage.SrmMmc.NewQuotaDialog.OnCreateButtonClicked(Object …

I had to format and reinstall XP Pro SP2 and lost the thumbnail preview that showed at the bottom of the Detail section of the left pane in Windows Explorer. I remember it is a simple item, but despite my best attempts at using XP's Help feature I cannot find the information. If anyone can help me, it would be greatly appreciated. Ken